Uvex pheos B-WR 9772030 Safety Helmet White Long Brim

The Uvex pheos B-WR 9772030 is the white, long-brim industrial safety helmet with a wheel ratchet suspension. It is made of high-density polyethylene (HDPE), weighs 430 g, and fits head sizes 52 to 61 cm. It meets EN 397 with the additional requirements for very low temperatures (-30 C) and molten metal splash (MM), which is an unusual combination of optional tests for a general-purpose helmet.

The helmet has slots for helmet lights, side Euroslot adapters (30 mm) for earmuffs and the pheos visor system, three variable air vents (uvex climazone ventilation) and a six-point textile harness. White is the colour that reflects sun best, which matters on open sites.

Technical specification

Key features from the datasheet

The datasheet lists a helmet with slots for uvex visors and earmuffs, side Euroslot adapters (30 mm) for earmuffs, three variable air vents for maximum ventilation, a suspension with a wheel ratchet for width adjustment on the B-WR, a six-point textile suspension harness for fit and comfort, and large printing areas for individualisation. The page says the rigid shell withstands pressure from the side and that accessories such as visors, spectacles, ear defenders or head torches can be added quickly.

Accessories and compatible items

The datasheet accessory list includes the suspension harness for pheos B-WR (9760.001), a sweatband (9760.005), pen holder, goggle clip, leather and forked chinstraps, winter caps, balaclava, helmet slot plugs, neck protection and a range of LED head torches including ATEX-labelled versions. The uvex pheos faceguard on this site (9790211) and the K-series earmuffs are designed to attach to the helmet slots.

Selection and ordering guide

The article number selects colour and harness: 9772.030 is the white B-WR long-brim helmet, and 9772.020 is the pheos B in white with the conventional harness. The datasheet runs to ten colours for the B-WR. Check helmet age: plastic shells degrade, and the manufacturer date should be recorded when issued.

Applications in GCC industry

Industrial helmets for oil and gas, petrochemical and construction sites commonly combine ratchet adjustment with accessory slots so that earmuffs, visors and lamps can be mounted. The molten-metal splash requirement is relevant to foundry, steel and welding shops, while the vents help in heat. Always follow the site rule on helmet colour and expiry.

Care and use

Clean with water and standard cleaning products, disinfect with commercial disinfectants, store out of direct sunlight and replace after a heavy impact or when the shell shows cracks or discoloration.

Selection and use notes

Adjust the wheel ratchet to the head and check that the helmet sits level. Inspect the shell and harness before each use, replace the helmet after a heavy impact and at the end of the life given by the maker, and do not paint or alter the shell. Check that any accessories you plan to attach are approved for this model.

Information needed for a quotation

Send the full model code, the quantity, the delivery location in Oman or the GCC, the intended use and any accessories needed, so that the complete package can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification and the site risk assessment before a purchase is confirmed. Ratings, standards and dimensions are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Frequently asked questions

What standard does the pheos B-WR 9772030 meet?
EN 397 with the additional requirements for very low temperature (-30 C) and molten metal splash (MM), per the datasheet and product page.

What size range and weight?
Head sizes 52 to 61 cm and a weight of 430 g.

Can earmuffs and visors be attached?
Yes, it has 30 mm Euroslot adapters for earmuffs and the pheos visor system, and a front slot for helmet lights.

What is the difference between B and B-WR?
The B-WR has a wheel ratchet suspension for continuous width adjustment; the B uses a conventional harness and is 50 g lighter.

What should I confirm before ordering?
Confirm the colour, harness type and accessories, then request a quotation with the part number 9772030.

Documents and quotation

The uvex head protection datasheet TD-10449-04 (dated 11.05.2017) for pheos B and pheos B-WR is attached to this page; it is an older sheet, so confirm current details on the uvex site. Browse more products in Safety & PPE. Seven Star LLC is an independent supplier in Muscat; send the exact part number and quantity for a quotation, and confirm all ratings and approvals against the current manufacturer documents before ordering.