- Automation & ControlView all 2,803 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: KRACHT
KRACHT KP 1/4 A10A S0A 4NL1 High-Pressure Gear Pump
Description
KRACHT KP 1/4 A10A S0A 4NL1 high-pressure external gear pump: overview
The KRACHT KP 1/4 A10A S0A 4NL1 is a configuration of the KRACHT KP 1 high-pressure external gear pump, the compact aluminium-housing series built for hydraulic power units, test stands and machine drives. The type key is read in sections: nominal displacement 4 cm3 per revolution, a SAE-A flange mounting cover, clockwise rotation, no outboard bearing, standard housing ports, shaft end S, no second shaft end, a standard end cover and the fixed design code 4NL1 for NBR seals, aluminium housing and ground case-hardened gearing.
Maintenance teams search for the exact string KRACHT KP 1/4 A10A S0A 4NL1 because KRACHT assigns one complete type key to every build. Replacing a pump with a neighbouring key can change the mounting flange, the shaft end or the port layout, so the full designation is the safe way to order a like-for-like replacement or a spare for stock.
Key features of the KP 1/4 A10A S0A 4NL1
- Nominal displacement 4 cm3 per revolution (geometric displacement 4 cm3/r in the catalog table).
- Housing of high-strength aluminium alloy with double-gland bearings and multi-component plain bearing bushes.
- Gearing of case-hardening steel, surface hardened with ground and honed tooth flanks; 13 teeth for low flow pulsation.
- Mounting: SAE-A two-bolt flange with 106.4 mm hole spacing and an 82.55 mm centring diameter.
- Drive: SAE-A involute spline shaft end with 9 teeth, DP 16/32 and a 30 degree pressure angle, rated for 55 Nm maximum shaft load.
- Pressure-field sealing compensates axial clearance so that efficiency holds across the pressure range.
- Rotation is fixed at clockwise when viewed on the drive shaft end; flow runs from left to right.
KP 1/4 A10A S0A 4NL1 technical specifications
| Parameter | Value |
|---|---|
| Type key | KP 1/4 A10A S0A 4NL1 |
| Series | KRACHT KP 1 high-pressure gear pump |
| Nominal displacement | 4 cm3/r |
| Maximum pressure (peak) | 300 bar |
| Rated pressure | 280 bar |
| Continuous operating pressure | 250 bar |
| Maximum speed with NBR seals | 3000 1/min |
| Minimum speed at 100 bar | 600 rpm |
| Flange cover | SAE-A: SAE-A two-bolt flange with 106.4 mm hole spacing and an 82.55 mm centring diameter |
| Shaft end | Involute spline SAE-A, DP 16/32, 9 teeth; 55 Nm maximum |
| Housing ports | housing ports of type A: an inlet bore of 15 mm diameter on a 40 mm pitch circle and an outlet bore of 15 mm diameter on a 35 mm pitch circle |
| Fluid temperature, NBR seals | up to 90 degrees C |
| Ambient temperature | minus 20 to plus 60 degrees C |
| Inlet pressure range | minus 0.4 to 2 bar (5 bar short time) |
| Viscosity range | 10 to 600 mm2/s; recommended 30 to 45 mm2/s |
| Recommended oil cleanliness | ISO 4406 class 19/16, NAS 1638 class 10 |
| Catalog dimensions E / F | 89.2 mm / 40.4 mm |
| Catalog weight | 2.6 kg |
| Moment of inertia | 28.4 x 10-6 kg m2 |
Values above come from the KRACHT KP 1 catalog tables for the 4 cm3 size. The catalog states that pressure data applies for viscosity of 30 mm2/s and above, and that rated pressure may be exceeded only for short peaks within the pressure-time chart, with at most 30 operating cycles per minute.
Reading the KP 1/4 A10A S0A 4NL1 type key
Each character group of KP 1/4 A10A S0A 4NL1 has a meaning. The flange letter A selects the SAE-A cover. The digit 1 gives clockwise rotation. The next position 0 means no outboard bearing, and the final letter of that block, A, selects the housing-side ports. After the space, S chooses the drive shaft end, 0 means no second shaft end and A is the standard end cover. The closing group 4NL1 is the design serial from KRACHT, the aluminium housing code, the ground gearing code and NBR seals.
Housing ports on the KP 1/4 A10A S0A 4NL1
The KP 1/4 A10A S0A 4NL1 is delivered with housing ports of type A: an inlet bore of 15 mm diameter on a 40 mm pitch circle and an outlet bore of 15 mm diameter on a 35 mm pitch circle. Anticlockwise rotation would swap inlet and outlet, so check the rotation of the motor against the clockwise designation before ordering.
Typical applications in oil and gas, utilities, water and manufacturing
KP 1 pumps supply small, high-pressure oil flows. In oil and gas facilities across Oman and the GCC they are found in hydraulic power packs for valve and actuator control, lubrication and test equipment. In utilities and water plants they feed hydraulic clamping, gate and screen drives, while in manufacturing they power presses, tooling, mobile units and machine tool auxiliaries. The 4 cm3 displacement suits compact packs where a few litres per minute at high pressure are needed and the motor is a standard four-pole or six-pole unit.
Spare-part buyers in the region often hold an old pump tag that reads KP 1/4 A10A S0A 4NL1 and need the same unit again after a bearing or seal failure. Because the mounting and shaft are fixed by the key, the replacement bolts straight to the existing bell housing or bracket.
Selection and compatibility notes for KP 1/4 A10A S0A 4NL1
Confirm four points before you request a quotation for KP 1/4 A10A S0A 4NL1: the mounting pattern on your bracket, the shaft end and coupling, the rotation direction, and the port layout. The SAE-A flange suits standard SAE-A bolt patterns. Shaft load is limited to 55 Nm, and the catalog does not permit axial loads on the drive shaft end. Radial loads should be absorbed only by types fitted with an outboard bearing, so use an elastic coupling with correct alignment.
Fluids are mineral oil to DIN 51524 and 51525 or engine oil to DIN 51511. HEES bio-oils may be used up to 70 degrees C with maximum pressure reduced by 20 percent and only on request to the maker. NBR seals limit the fluid temperature to 90 degrees C.
Installation and commissioning of the KP 1/4 A10A S0A 4NL1
Mount the pump on the SAE-A flange face, fit the coupling or drive element to the involute spline sae-a, dp 16/32, 9 teeth shaft end, and tighten any lock nut to the torque given in the dimension drawing. Fill the suction line, keep inlet pressure between minus 0.4 bar and 2 bar, and start the pump unloaded so that air leaves through the circuit. Recommended filtration is a filter with a beta 25 value of at least 75 for pressures up to 300 bar, and the system should reach ISO 19/16 cleanliness. Bring pressure up in steps and watch discharge temperature and noise during the first hours.
Maintenance and spare-part notes
Clean oil and correct alignment determine the service life of the KP 1/4 A10A S0A 4NL1. Check shaft seals for weeping, monitor case temperature and replace the filter element on the differential-pressure indicator. A rise in noise or a fall in delivery at constant speed points to wear in the bearing bushes or contamination. When ordering a replacement, quote the whole key KP 1/4 A10A S0A 4NL1 and, if available, the pump nameplate data and serial number.
Related products and ordering notes
KP 1 pumps can be combined with the KRACHT DBD pressure relief valve, flanged connectors, bell housings and couplings from the same catalog. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Lead time and availability for KP 1/4 A10A S0A 4NL1 are confirmed when you send your request.
Frequently asked questions about KP 1/4 A10A S0A 4NL1
The answers below summarise how the KP 1/4 A10A S0A 4NL1 is defined, which loads it accepts and what to confirm before ordering.
Documents and quotation
The KRACHT KP 1 catalog PDF is attached to this page as the datasheet for KP 1/4 A10A S0A 4NL1. To obtain a quotation, send an RFQ with the part number KP 1/4 A10A S0A 4NL1 and the quantity required, together with your delivery location, and our team will reply with availability and lead time.
Datasheets & Documents
- Datasheet KRACHT KP 1/4 A10A S0A 4NL1 High-Pressure Gear Pump Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.
Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.
KRACHT company profile
| Founded | 1911, registered as Hillebrand & Kracht OHG |
|---|---|
| Headquarters | Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971 |
| Ownership | Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company |
| Size | About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco |
| Subsidiaries | USA, China and Hungary (KRACHT Hidraulik Kft.) |
| Product families | External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders |
Milestones
- 1911: Hillebrand & Kracht OHG is entered in the trade register.
- 1971: The company moves into its present premises in Werdohl.
- 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
- 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.
KRACHT pumps, flow meters and valves listed
The listing follows four product groups, pumps, fluid measurement, valves and drives:
- Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
- Fluid measurement technology: gear type flow meters such as the VCA in aluminum
- Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
- Drive technology: KM hydraulic gear motors
Where KRACHT equipment is used
KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.
KRACHT products we list
Ordering KRACHT parts: what we need
KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.
Frequently requested KRACHT models: KRACHT Pump Technology Series.
Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.
Browse KRACHT products by category: Safety Relief Valves, Pumps, Flowmeters, Electromotors.
FAQ
Questions about the KRACHT KP 1/4 A10A S0A 4NL1 High-Pressure Gear Pump
Answers from our engineering team on installation, compatibility and integration.
01What does the KRACHT KP 1/4 A10A S0A 4NL1 designation tell me?
It identifies a KP 1 gear pump of 4 cm3/r with SAE-A flange, Involute spline SAE-A, DP 16/32, 9 teeth shaft end, clockwise rotation and NBR seals in an aluminium housing.
02What is the maximum pressure of the KP 1/4 A10A S0A 4NL1?
The catalog lists 300 bar peak, 280 bar rated and 250 bar continuous operating pressure for the 4 cm3 size, at viscosity of 30 mm2/s and above.
03Which shaft end does the KP 1/4 A10A S0A 4NL1 have and how much torque can it take?
It has a involute spline sae-a, dp 16/32, 9 teeth shaft end rated for 55 Nm maximum shaft load; axial loads on the shaft are not permitted.
04What fluid temperature can the KP 1/4 A10A S0A 4NL1 handle?
With NBR rotary shaft seals the fluid may reach 90 degrees C; an FKM-sealed type is needed for up to 100 degrees C and has a different design code.
05How do I request a quotation for KP 1/4 A10A S0A 4NL1?
Send the full type key, quantity, delivery location in Oman or the GCC and any nameplate details through the RFQ form or by email.


















Reviews
There are no reviews yet.