Brand:

Weidmuller 2466890000 PRO TOP1 480W 24V 20A Power Supply

Description

Weidmuller Weidmüller 2466890000 PRO TOP1 480W 24V 20A overview

Weidmuller Weidmüller 2466890000 is the order number of the PRO TOP1 480W 24V 20A, catalogued as: Power supply, switch-mode power supply unit, 24 V. This page summarises what the manufacturer data sheet states for Weidmüller 2466890000, so that engineers and buyers in Oman and the GCC can check the main parameters before sending a request for quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer, so every figure below is taken from the published data sheet and should be confirmed against the current document for your project.

The PROtop range combines strong performance data with an emphasis on energy efficiency and sustainability. The maker highlights high efficiency, a long service life stated as twice that of standard power supplies, high MTBF values and very space-saving designs, which together are intended to lower energy cost and raise plant availability.

Key features of 2466890000

The data sheet for 2466890000 lists the following headline characteristics for the PRO TOP1 480W 24V 20A.

  • Nominal output of 480 W at 24 V DC ± 1 %.
  • Input range 85…277 V AC.
  • Efficiency stated as 93%.
  • Protection degree IP20 with housing: Metal, corrosion resistant.
  • Operating temperature -25 °C…70 °C.
  • Parallel connection option: Yes, for redundancy and power increase (with ORing MOSFET).
  • Width 68 mm, depth 125 mm, height 130 mm.
  • Short-circuit, overload and over-temperature protection are listed as: short-circuit.

Technical specifications for 2466890000

The table collects the values printed in the manufacturer data sheet. Values that are not printed there are intentionally left out rather than estimated. The GTIN printed for 2466890000 is 4050118481471.

Parameter Value
Order No. 2466890000
Type PRO TOP1 480W 24V 20A
Version Power supply, switch-mode power supply unit, 24 V
GTIN (EAN) 4050118481471
Output power 480 W
Rated output voltage 24 V DC ± 1 %
Output voltage, min. 22.5 V
Output voltage, max. 28.8 V
Nominal output current for Unom 20 A @ 60 °C
Rated input voltage 110…240 V AC / 120…340 V DC
AC input voltage range 85…277 V AC
DC input voltage range 80 … 410 V DC
Frequency range AC 45…65 Hz
Inrush current max. 5 A
Degree of efficiency 93%
Power factor (approx.) > 0.9
AC failure bridging time @ Inom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Parallel connection option Yes, for redundancy and power increase (with ORing MOSFET)
Short-circuit protection Yes, internal
Protection against inverse voltage Yes
Residual ripple, breaking spikes <50 mVss @ UNenn, Full Load
Connection system PUSH IN
Protection degree IP20
Protection class I, with PE connection
Housing version Metal, corrosion resistant
Width 68 mm
Height 130 mm
Depth 125 mm
Net weight 1520 g
Operating temperature -25 °C…70 °C
Storage temperature -40 °C…85 °C
Insulation voltage, input/output 3.5 kV
Surge voltage category III, II
Certificate no. (cULus) E258476
Certificate no. (cULusEX) E470829

Input and output figures should be read together with the derating information in the data sheet. For 2466890000 the nominal output is 480 W at 24 V DC ± 1 %, and the output current is given as 20 A @ 60 °C. A panel designer normally compares the continuous load of all connected devices, adds the inrush of any capacitive or motor-driven loads, and leaves headroom so that the supply does not operate at the limit of its rating at the highest cabinet temperature. The data sheet contains a derating curve, and that curve rather than the nominal value should be used when the cabinet is hot, as is common in Gulf summer conditions.

Typical applications of 2466890000 in Oman and the GCC

A DIN rail supply such as 2466890000 is used wherever 24 V DC or another low-voltage rail is needed for controllers, I/O, instruments and communication hardware. In oil and gas facilities it powers remote terminal units, marshalling cabinets and analyser shelters. In utilities and water treatment it feeds PLC panels at pumping stations, desalination skids and substations. In manufacturing it supplies machine control cabinets, conveyor drives interfaces and packaging lines. Operators of ageing plants in Oman also look for the exact order number when a failed unit has to be replaced during a short shutdown window.

Selection and compatibility notes for 2466890000

When selecting 2466890000, confirm the supply network first: the rated input voltage is stated as 110…240 V AC / 120…340 V DC and the AC range as 85…277 V AC. Check the available space against the dimensions of 68 mm width, 130 mm height and 125 mm depth, and confirm that the connection system (PUSH IN) fits your wiring standard. If your plan includes redundancy, check the parallel connection entry and use external diode or redundancy modules as recommended in the maker literature. Where the data sheet lists an alternative product for 2466890000, compare terminals, width and output rating before treating it as a drop-in replacement, because mounting depth and wiring may differ between generations.

Installation and commissioning of 2466890000

Mount 2466890000 on a TS 35 rail in the orientation given in the data sheet and keep the ventilation clearances recommended by the maker so that the housing can dissipate its power loss. Connect the protective earth first, use conductors within the cross-section range printed in the data sheet, and tighten the terminals to the stated torque. Protect the input with the recommended back-up fuse or breaker, set the output voltage with the adjustment potentiometer if the data sheet provides one, and check the status LED and any signalling contact before loading the supply. Measure the output under load after commissioning and record the value for later maintenance comparison.

Maintenance and spare part planning for 2466890000

For long service life keep dust and conductive deposits away from the vents and terminals, re-tighten terminals during planned shutdowns, and compare output or switching behaviour with the commissioning record. Because 2466890000 may be requested as a spare for a running installation, keeping one unit in a clean, dry store with its paperwork can shorten outage time. Record the order number 2466890000 and the type PRO TOP1 480W 24V 20A on the panel drawing so that the right item is requested when it must be replaced.

Related products and ordering notes for 2466890000

Other members of the same product family differ in output rating, width, input system and approvals, so the order number is the only safe way to identify the exact item. Quote 2466890000 together with the type PRO TOP1 480W 24V 20A when you contact us. We can also help with related rail accessories, end brackets, redundancy or buffer modules and neighbouring ratings when you are reviewing a whole panel. Lead time and availability are confirmed per request, and no price is shown on this page.

Weidmüller 2466890000 vs Other Weidmuller PRO TOP1 24V Power Supply Variants

Pick this variant when 2466890000 480W 20A is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.

Variant Distinguishing detail
Weidmuller 2466890000 PRO TOP1 480W 24V 20A Power Supply (this page) 2466890000 480W 20A
Weidmuller 2466900000 PRO TOP1 960W 24V 40A Power Supply 2466900000 960W 40A

Frequently asked points about 2466890000

  • What is 2466890000? It is the order number of the PRO TOP1 480W 24V 20A.
  • Which family does it belong to? The PROtop range combines strong performance data with an emphasis on energy efficiency and sustainability.
  • Where are the dimensions? Width 68 mm, height 130 mm, depth 125 mm as printed in the data sheet.
  • How do I order? Send the RFQ with the part number 2466890000 and the required quantity.

Documents and quotation

The manufacturer data sheet for 2466890000 contains the full parameter list, approvals, derating information and accessory suggestions, and we can supply a copy of the data sheet with the quotation. To request a quotation, send your RFQ with the part number 2466890000, the type PRO TOP1 480W 24V 20A and the quantity you need, plus your delivery location in Oman or the GCC. Please state if you need the exact catalogue number only or if an alternative is acceptable.

Datasheets & Documents
  • PDF Datasheet PRO TOP1 480W 24V 20A Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.

Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.

Weidmüller company profile

Founded 1850, Germany
Headquarters Detmold, Germany (since 1948)
Ownership Family-owned
Revenue Over €1 billion (2023)
Product families Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools

Milestones

  • 1850: Weidmüller is founded.
  • 1948: The company is re-established in Detmold.

Weidmüller products listed here

The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.

Weidmüller products we list

Family Examples
Power Modules Weidmuller PRO MAX 180W 24V 7.5A DIN Rai…, Weidmuller PRO MAX3 240W 24V 10A Three-P…
Switchgear, Enclosures & Distribution Weidmuller Klippon Connect SAK Terminal…
PLC & I/O Cards Weidmuller UR20-FBC-PN-IRT-V2 u-remote P…

Ordering Weidmüller parts: what we need

Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.

Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.

FAQ

Questions about the Weidmuller 2466890000 PRO TOP1 480W 24V 20A Power

Answers from our engineering team on installation, compatibility and integration.

01What is Weidmuller 2466890000?
2466890000 is the order number of the PRO TOP1 480W 24V 20A, catalogued by the manufacturer as: Power supply, switch-mode power supply unit, 24 V.
02What are the main ratings of 2466890000?
The data sheet lists 480 W at 24 V DC ± 1 % with input 85…277 V AC.
03What are the dimensions of 2466890000?
The data sheet gives width 68 mm, height 130 mm and depth 125 mm, mounted on a TS 35 rail.
04Is 2466890000 still available from the manufacturer?
The data sheet shows no discontinuation note for 2466890000; availability should still be confirmed per RFQ.
05How do I request a quote for 2466890000?
Send an RFQ to Seven Star LLC with the part number 2466890000 and the quantity. We are an independent supplier and not affiliated with the manufacturer.