Brand:

Keyence FS-N11N Digital Fiber Amplifier, Main Unit, NPN

Description

FS-N11N: what this FS-N series sensor is and how its code reads

FS-N11N is a Keyence FS-N series product, listed by the maker as: Fiber Amplifier, Cable Type, Main Unit, NPN. The FS-N series is a digital fiber-optic amplifier line. The amplifier is a slim DIN-rail unit that drives a plastic or glass fiber unit, which carries light to a very small sensing tip that can reach spaces no photoelectric body could. Seven Star LLC supplies FS-N11N in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

FS-N is the series, 11 the standard main unit with one output, and N the NPN output.

FS-N11N is the standard main unit for FS-N. It handles up to 16 expansion units, offers response times from 50 microseconds to 16 ms, and runs on 12 to 24 VDC. It weighs about 75 g.

FS-N11N technical specifications

Parameter Specification
Manufacturer / part number Keyence / FS-N11N
Product description Fiber Amplifier, Cable Type, Main Unit, NPN
Type Standard 1 output Cable
Output NPN
Main unit/expansion unit Main unit
Control output 1 NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Light source LED Red, 4-element LED
APC ON/OFF switchable (Factory setting: OFF)
Response time 50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units 0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion Up to 16 units can be connected total (two output type is treated as two units)
Rating Power voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current Consumption Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V) Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V) Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance Ambient light: Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
Ambient temperature -20 to +55 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm , 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s² , 3 times in each of the X, Y, and Z directions
Case material Both main unit and expansion unit housing material: Polycarbonate
Weight Approx. 75 g

Values in the table are taken from the maker’s model page for FS-N11N. Treat them as nominal and confirm the exact conditions in the instruction manual before final design.

How the sensing principle behind FS-N11N works

The amplifier contains a red four-element LED and a receiver. Light travels down one fiber to the target area and returns, or crosses a gap to a second fiber, and the amplifier measures the intensity that comes back. Because the fiber itself has no electronics, the sensing tip is thin, heat tolerant and immune to electrical noise.

Response-time settings from high speed to mega let the user trade speed against stability. Dual displays show the threshold and the live value so that settings can be verified with the target present.

Where FS-N11N fits: related FS-N series parts

The amplifier needs a fiber unit chosen for the sensing mode, such as thrubeam, diffuse or retro-reflective. Main units hold the supply and expansion units are clipped on.

The FS-N series range includes the following part numbers, which are listed for cross-reference: FS-N11N, FS-N12N, FS-N11CN, FS-N12CN, FS-N13N, FS-N14N, FS-N11MN, FS-N11P, FS-N12P, FS-N11CP, FS-N12CP, FS-N13P, FS-N14P, FS-N13CP, FS-N14CP, FS-N15CN, FS-N15CP and FS-N10. Whether a particular combination is compatible should be confirmed from the maker’s documents. Closely related models from the same family that you may also want to compare include FS-N12CP, FS-N13N.

Selecting FS-N11N: ordering checklist

  • Main or expansion unit, and one or two outputs.
  • NPN or PNP, and cable or M8 connector.
  • Fiber unit that suits the object size and distance.
  • Response mode versus object speed.
  • Number of units on the rail and the interference-prevention limit.
  • Ambient temperature near the amplifier.

For FS-N11N specifically, confirm the output type, the connection style and the rated distance shown in the table above against the real installation drawing before placing an order.

Installing and maintaining FS-N11N

Click the amplifier onto a DIN rail, attach expansion units before wiring, and insert the fibers fully into the head before clamping the lock lever. Run the automatic power-tuning set-up with the target in place.

During maintenance clean fiber tips with a lint-free cloth, never kink the fibers, and re-run set-up after replacement. Keep spare fibers because they are consumables.

Typical applications of FS-N11N in Oman and the GCC

Fiber amplifiers are used in electronics and small-part assembly, packaging machinery and laboratory automation in Oman and the GCC, where the sensing tip must fit into tight positions while the amplifier stays in the control cabinet.

General-purpose main amplifier for small-part detection lines. Extra heat, dust and humidity are normal in the region, so check the ambient temperature and enclosure rows in the table against the real mounting location, including direct sunlight on outdoor skids.

FS-N series models compared with FS-N11N

The table lists the FS-N series models in our current range with the maker’s own description, to help you see how FS-N11N differs from its neighbours.

Model Maker description
FS-N11N Fiber Amplifier, Cable Type, Main Unit, NPN
FS-N12CP Fiber Amplifier, M8 Connector Type, Expansion Unit, PNP
FS-N13N Fiber Amplifier, Cable Type, Main Unit, NPN

Information to send with your FS-N11N RFQ

  • Exact part number: FS-N11N (and quantity, including any matching transmitter, receiver, reflector or head).
  • Output polarity required by your PLC input card (NPN or PNP).
  • Cable length or connector type and the mounting method.
  • Ambient conditions: temperature, washdown, dust and direct sunlight.
  • Project reference, delivery location in Oman or the GCC and required lead time.
  • Any related items needed, such as brackets, cables, reflectors or a mating amplifier.

Documents and quotation

Send us the part number FS-N11N and we will confirm available documents, including the maker’s datasheet and instruction manual where we can provide them. Prices are quoted per request and are not shown on this page.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC. We are not affiliated with the manufacturer, and we quote against your RFQ with delivery and lead time confirmed in the quotation.

Other Models in the Keyence Fs N Range

Seven Star LLC supplies models from the Keyence Fs N range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Keyence FS-N11N Digital Fiber Amplifier, Main Unit, NPNPhotoelectric SensorsYou are viewing this model
Keyence FS-N12CP Digital Fiber Amplifier, M8 Expansion, PNPPhotoelectric SensorsView details
Keyence FS-N13N Digital Fiber Amplifier, 2-Output, NPNPhotoelectric SensorsView details
Keyence FS-N11P Digital Fiber Amplifier, Main Unit, PNPAutomation AccessoriesView details
Keyence FS-N11MN Digital Fiber Amplifier, Monitor Output, NPNAutomation AccessoriesView details
Keyence FS-N14N Digital Fiber Amplifier Expansion Unit, NPNAutomation AccessoriesView details
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Keyence is a Japanese maker of sensors, measuring instruments and machine vision, founded in 1974 by Takemitsu Takizaki and headquartered in Osaka. It sells directly to factories and makes photoelectric and laser sensors, code readers, vision systems, measurement systems and microscopes.

Seven Star LLC sources and supplies Keyence sensors and code readers for machine builders and maintenance teams in Oman and the GCC.

Keyence company profile

Founded 1974, Japan
Founder Takemitsu Takizaki
Headquarters Osaka, Japan
Sales model Direct sales
Product families LR-Z and LR-W laser and photoelectric sensors, SR-X code readers, IV and CV-X vision systems, LJ-X laser profilers

Keyence series listed

Three series appear on this page. The LR-Z is a self-contained CMOS laser sensor. Keyence describes it as detecting by distance and by received light, with one-button teaching, a stainless steel body rated IP68/69K and a range of up to 500 mm depending on the model; the LR-ZB250CP is the listed type. The LR-W500C is a full-spectrum reflective photoelectric sensor from the LR-W series. The SR-X100 is an autofocus 2D code reader.

Keyence products we list

Family Examples
Photoelectric Sensors LR-W500C Full-Spectrum Reflective Photoe…
Laser Distance, LiDAR & Radar Sensors LR-ZB250CP LR-Z Series Self-Contained CM…
Machine Vision SR-X100 Autofocus 2D Code Reader

Ordering Keyence sensors: what we need

Keyence type codes are short but exact. Send the complete model, such as LR-ZB250CP, because the letters at the end decide the output type and the connection. Remember that many Keyence sensors need a separately ordered cable or connector, and code readers need a cable, a power supply and often a mounting bracket. List those items, the cable length, and the communication interface your PLC uses.

Facts checked against Keyence's published company profile, October 2026.

FAQ

Questions about the Keyence FS-N11N Digital Fiber Amplifier, Main Unit,

Answers from our engineering team on installation, compatibility and integration.

01What is Keyence FS-N11N?
FS-N11N is a Keyence FS-N series product described by the maker as: Fiber Amplifier, Cable Type, Main Unit, NPN. Seven Star LLC supplies it in Oman and the GCC as an independent supplier.
02How many units can FS-N11N control?
Up to 16 units can be connected in total as stated in the table.
03What is the fastest response of FS-N11N?
50 microseconds in HIGH SPEED mode, with slower modes for stability.
04Does Seven Star LLC supply FS-N11N in Oman?
Yes, we quote FS-N11N on request for Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. Send the part number and quantity with your RFQ and we confirm availability and lead time.
05What should I check before ordering FS-N11N?
Check output polarity, connection style, the rated distance or range in the specification table, the ambient temperature at the installation point and any matching accessories. Send the part number and we will confirm available documents.