APC SRYLSBP20KP Service Bypass Unit for SRYL 200/208/230/240V

SRYLSBP20KP bypass panel overview

Within the Smart-UPS Modular Ultra Accessories group, the APC SRYLSBP20KP is listed as Service Bypass Unit for SRYL 200/208/230/240V 125A MBB Hardwire Input/Output.

Its recorded product type is bypass kit.

It belongs to the Smart-UPS Modular Ultra Accessories range and is classified as bypass kit.

Technical specifications

Installation and compatibility

Rack space: 4U.

Check the exact compatible UPS model and the installation sheet before ordering, because accessory kits, cables and options are specific to a given system or range.

Site requirements and approvals

Dimensions are 175 mm x 432 mm x 755 mm (H x W x D), and the unit weighs 23 kg. Colour: black and silver.

Listed operating limits: operating temperature 0…40 °C; operating altitude 0…3000 m.

Warranty recorded by APC (months): 60.

Further electrical values recorded for the APC SRYLSBP20KP include: max line current: 125 A. Use these figures when sizing upstream protection and cabling, and confirm them against the installation documents for the exact variant.

The mounting mode is listed as rack-mounted. The unit measures 175 mm x 432 mm x 755 mm (H x W x D) and weighs 23 kg, so check the available space and the floor or rack loading before delivery. It occupies 4U of rack space. Rack installation should be checked against the rack depth, rail kit and the clearance needed behind the unit for cables and airflow. Listed environmental limits: operating temperature 0…40 °C; altitude 0…3000 m. Equipment rooms in the Gulf region often run warm, so leave ventilation clearance and keep the unit away from direct heat sources.

The warranty period recorded in the product data is 60 months. If a project requires certificates or test reports, include that request with the quotation request.

Where the SRYLSBP20KP fits in an APC Smart-UPS Modular Ultra installation

Smart-UPS Modular Ultra is a modular on-line UPS platform with lithium-ion batteries. Power and battery capacity are built from modules, so the system can be sized for today's load, expanded later and serviced module by module, which suits distributed IT and edge rooms.

A maintenance bypass lets the protected load be transferred from the UPS output to the incoming supply, so the UPS can be serviced, tested or replaced without shutting the load down. The transfer is made in a defined sequence so the load is never interrupted, and the panel is wired to match the voltage, current and number of UPS units in the installation.

In the product data for the APC SRYLSBP20KP, it occupies 4U rack unit(s). These values are the starting point for matching it to the rest of the installation.

Applying the SRYLSBP20KP on sites in Oman and the GCC

The listed operating temperature tops out at 40 °C. Summer shade temperatures in Muscat, Sohar and the interior regularly pass 45 °C, so the equipment belongs in an air-conditioned room or cabinet rather than an open plant area. Fine dust inland and humid, salty air on the coast are hard on electronics, so a sealed room, clean filters and periodic inspection of fans and terminals are part of a reliable installation.

Service life and maintenance of the APC SRYLSBP20KP

Plan inspections at least once a year: check that the equipment is clean, that fans and filters are free of dust, that cable terminations are tight and that no alarms are stored in the event log. Where a UPS is involved, run a self-test and a short battery test under real load, and record the results so that a gradual loss of runtime is noticed before it becomes a failure. Replace batteries as a complete set, never by mixing old and new blocks, and keep the replaced items for proper recycling.

Seven Star LLC supplies APC equipment as an independent supplier based in Muscat. Original product documents are provided where available, and the part number SRYLSBP20KP can be quoted together with related batteries, accessories and spares in one enquiry.

Storage, handling and delivery of the APC SRYLSBP20KP

Electronic assemblies and accessories should be stored in their original packaging in a dry, temperature-controlled area until installation, away from dust and condensation. Check the packaging and the part number label on arrival, keep the documents supplied with the item, and record the installation date so that future service intervals and warranty questions can be answered quickly. Seven Star LLC arranges delivery to project sites, warehouses and offices across Oman, and shipment to other GCC countries on request.

Ordering checklist for the SRYLSBP20KP

A complete enquiry lets Seven Star LLC confirm compatibility and quote without back-and-forth. Include:

• The UPS model and serial number the item will be used with
• The quantity needed, including any spares to keep on site
• Rack, room or panel details where the item will be installed
• Any documents or certificates required for the project
• The delivery location in Oman (for example Muscat, Sohar, Duqm or Salalah) or elsewhere in the GCC, and the required date

Other APC UPS systems, batteries and accessories and Schneider Electric equipment can be combined in one quotation.

Documents and quotation

The user guide for the SRYLSBP20KP is hosted on this page under Documents so the wiring, installation and operating details can be reviewed before ordering.

The single-unit shipping package is listed as 30 cm (height) x 58 cm (width) x 97 cm (length) with a packed weight of 32.5 kg. Use these values when planning freight, lifting and receiving space.

To order, submit the part number SRYLSBP20KP, the quantity and the delivery location. Related items are grouped under UPS and Batteries. Seven Star LLC is an independent supplier based in Muscat and answers with availability and a quotation.