Brand:

APC SRV2KIL Easy UPS Online 2000VA/1600W Tower UPS

Description

Overview

The APC SRV2KIL is a tower-format Easy UPS SRV online double-conversion unit rated at 2000VA / 1600W, delivering data-center-grade power protection to mid-sized server racks, network cabinets and light industrial control panels.Seven Star LLC supplies this item on request with the manufacturer documentation, and availability and lead time are confirmed at quotation. Facility engineers select this model whenever a mid-capacity single-phase load needs true online double-conversion protection with headroom above the smaller SRV1KIL, without stepping up to a rack-mount Smart-UPS SRT system.

As part of the Easy UPS SRV family, the APC SRV2KIL was engineered by Schneider Electric to bring genuine online double-conversion topology to small and medium facilities that need dependable protection but do not require the full scalability of a Symmetra or Smart-UPS SRT deployment. This positioning makes the APC SRV2KIL an economical way to secure online-grade protection without paying for capacity a facility does not yet need.

Measurement and Working Principle

The APC SRV2KIL continuously rectifies incoming AC to DC and reinverts it to a regulated AC sine wave, so the connected load is always powered from the inverter stage rather than switched onto backup power only when an outage is detected. This double-conversion design gives the APC SRV2KIL zero transfer time and complete isolation from input voltage sags, surges, and frequency instability, conditions frequently encountered on generator-backed and rural GCC utility feeds. Internal automatic and manual bypass circuitry keeps power flowing to the load even during service events, and the unit’s multifunction LCD console reports load percentage, battery status, and alarm conditions in real time.

Engineering Design of the APC SRV2KIL

Housed in a tower chassis measuring 336mm H x 335mm W x 425mm D and weighing approximately 45.4kg with its included battery, the SRV2KIL accepts 230V single-phase input (configurable 220/230/240V) across a wide 110-285V input range and delivers a regulated 230V output rated at 1600 watts / 2000 VA through four IEC 60320 C13 outlets. It includes an Intelligent Card Slot with one free expansion slot for an optional network management card, plus built-in serial and USB connectivity for PowerChute software integration. The lead-acid battery is rated at 72V, recharges in approximately 5.5 hours and has a rated service life of 3 to 5 years, and the unit provides a 600 joule surge energy rating alongside its double-conversion protection. A crest factor of 3:1 and total harmonic distortion of 3% ensure clean power even to sensitive switch-mode power supplies.

Key Features

  • The APC SRV2KIL provides true online double-conversion protection with zero transfer time for sensitive electronic loads.
  • The APC SRV2KIL delivers 1600W / 2000VA capacity with a wide 110-285V input tolerance for unstable utility feeds.
  • The APC SRV2KIL includes an Intelligent Card Slot for optional SNMP network management card integration.
  • The APC SRV2KIL features automatic and manual internal bypass, keeping the load powered during maintenance.
  • This Easy UPS On-Line unit maintains low 3% harmonic distortion for clean power delivery to sensitive equipment.

Industrial Applications

The APC SRV2KIL is commonly deployed to protect mid-sized server racks, network switches, PABX systems and building management panels in commercial and light industrial facilities across Oman. In industrial settings it is frequently specified to back up PLC control racks, HMI stations and local SCADA gateway nodes where double-conversion online protection is required but a rack-mount Smart-UPS SRT system would be oversized. Because it is tower-format and needs no rack infrastructure, it is also a practical choice for site offices, gatehouses and remote instrumentation shelters in Oman’s oil and gas and utilities sectors.

System integrators across Muscat and the wider GCC also specify the APC SRV2KIL for CCTV and access-control head-end equipment in mid-sized facilities, where continuous, glitch-free power is essential to maintain uninterrupted recording and access logging even through significant utility disturbances.

Because the APC SRV2KIL sits between the smaller SRV1KIL and the larger rack-mount Smart-UPS SRT range, it is also a common upgrade path for facilities that outgrow a 1kVA online UPS but still want a self-contained tower unit rather than committing to rack infrastructure, making it a practical mid-point for growing server rooms and equipment closets across the region. Seven Star LLC also supports customers with load-sizing guidance during the selection process, helping facility teams confirm that a tower-format online unit is the right fit before committing to rack-mount infrastructure, and its compact footprint means it can be installed in a standard equipment closet without dedicated cooling or containment upgrades, which keeps overall project costs predictable for smaller sites across Oman.

Technical Specifications

Model APC SRV2KIL
Rated Capacity 1600 W / 2000 VA
Topology Double conversion online
Nominal Input Voltage 230V, 110-285V range, 40-70Hz auto-sensing
Nominal Output Voltage 230V (configurable 220/230/240V)
Output Receptacles 4 x IEC 60320 C13
Battery Type Lead-acid, external included, 72V
Recharge Time Approx. 5.5 hours
Communications Serial port, USB port, Intelligent Card Slot
Dimensions (H x W x D) 336 x 335 x 425 mm
Net Weight 45.4 kg
Surge Energy Rating 600 joules

Request a Quote for APC SRV2KIL Easy UPS Online 2000VA/1600W Tower UPS

Seven Star LLC is a trusted supplier of APC by Schneider Electric products supplying the APC SRV2KIL on request, with technical pre-sales support and installation guidance across Oman, the UAE, Saudi Arabia, and the wider GCC. Contact Seven Star LLC today for a fast quotation and expert advice on sizing the APC SRV2KIL to your server, network, or control-panel power protection requirements.

Browse the full APC range or see more UPS and Batteries products supplied by Seven Star LLC in Oman and the GCC.

APC SRV2KIL key ratings from the manufacturer data

The table below lists the main values that Schneider Electric publishes for the APC SRV2KIL. Use it to check the model against your load, rack or room before you request a quotation.

Product range Easy UPS On-Line
Product type Uninterruptible power supply (UPS)
UPS topology On-Line
Maximum output (VA) 2000 VA
Maximum output (W) 1600 W
Battery voltage 72 V
Battery type Lead-acid external included
Typical recharge time 5.5 h
Expected battery life 3 to 5 year(s)
Efficiency 88 % (full load)
Surge energy rating 600 J
Control panel Multifunction LCD status and control console
Mounting Not rack-mountable
Height 336 mm
Width 335 mm
Depth 425 mm
Operating temperature 0 to 40 °C

Battery replacement and runtime for the APC SRV2KIL

Schneider Electric gives an expected battery life of 3 to 5 years for this model, and a typical recharge time of 5.5 hours after a discharge. Temperature has the largest effect on that figure: as a rule of thumb, the life of a sealed lead-acid battery roughly halves for every 10 °C above 25 °C. In Oman, a UPS in an air-conditioned room held at 20 to 25 °C will need far fewer battery replacements than one in a hot plant room or a site cabin. Runtime can be extended with external battery packs from the matching APC range; send us the runtime you need at your actual load and we will confirm the pack model and quantity.

Looking after several APC units? Our APC UPS replacement battery finder lists the official cartridge and quantity for more than 340 APC models.

Ordering the APC SRV2KIL for sites in Oman

To quote the SRV2KIL quickly and correctly, please include:

  • The connected load in watts and VA, with some margin below the 2000 VA / 1600 W rating
  • The runtime you need at that load, so the battery configuration can be checked
  • Input and output connections and the number of outlets required at the site
  • Monitoring needs: USB, a network management card or integration with a BMS or SCADA system
  • Where the UPS will be installed and the room temperature (the manufacturer operating range is 0 to 40 °C)
  • Whether a spare replacement battery cartridge should be supplied with the unit

Send these details with the Request for Quotation button on this page. Seven Star LLC supplies APC by Schneider Electric equipment as an independent supplier and delivers across Oman, with shipment to other GCC countries on request.

Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

APC is Schneider Electric's brand for uninterruptible power supplies, power distribution units, cooling and racks for IT and control systems. American Power Conversion was founded in 1981 by three engineers from MIT's Lincoln Laboratory and grew into one of the largest UPS makers in the world. Schneider Electric completed its acquisition of APC on 14 February 2007, combined it with MGE UPS Systems, and since 2011 APC has been a product brand of Schneider Electric.
Seven Star LLC lists APC uninterruptible power supplies from desktop Back-UPS units to modular Symmetra systems, together with battery packs and network cards, and sources them for sites in Oman.

APC company profile
Founded1981, USA, as American Power ConversionFoundersThree engineers from MIT Lincoln LaboratoryOwnershipSchneider Electric since 14 February 2007; an APC by Schneider Electric product brand since 2011Product familiesBack-UPS, Easy UPS, Smart-UPS line-interactive, Smart-UPS On-Line SRT and SRV, Galaxy three-phase UPS, rack PDUs, NetShelter racks, network management cards and EcoStruxure IT software

Milestones
1981: American Power Conversion is founded by three MIT Lincoln Laboratory engineers.2006: Schneider Electric announces the acquisition of APC on 30 October.2007: The acquisition is completed on 14 February; APC is combined with MGE UPS Systems.2011: APC becomes a product brand within Schneider Electric.

APC UPS families on this page

APC names its UPS lines by topology and size:

Back-UPS and Back-UPS Pro: line-interactive units for workstations and small loads, such as BX1600MI-MS and BR1600MISmart-UPS: line-interactive models with sine wave output, including SMT750I, SMC1000IC and the Smart-UPS X SMX3000HV with its SMX120BP external battery packSmart-UPS SRT and Smart-UPS RT: online double-conversion units, for example SRT2200XLI, SRT3000XLI, SRT5KRMXLI and SURT8000XLIEasy UPS Online: SRV2KILSymmetra LX and Symmetra PX: modular, scalable systems for larger loads

The AP9641 Network Management Card 3 adds remote monitoring to UPS models with a SmartSlot.

Where APC UPS systems are used

In industrial plants across the GCC, APC UPS units back up DCS and PLC cabinets, operator stations, SCADA servers, telecom racks, fire and gas panels and analyzer shelters. Online double-conversion models are normally chosen for control systems because the load is always fed through the inverter. Line-interactive units suit office IT and less critical loads.

APC products we list
FamilyExamplesUPS and BatteriesAP9641 Network Management Card 3, BR1600MI Back-UPS Pro 1600VA/960W, BX1600MI-MS Back-UPS 1600VA Tower UPS, SMC1000IC Line-Interactive UPS 1000VA 600W, SMC1500I Smart-UPS C 1500VA/900W, SMT750I Smart-UPS 750VA/500W Line-Interactive, SMX120BP Smart-UPS X 120V External Battery, SMX1500RMI2U Smart-UPS X 1500VA Rack/Tower and 9 more

Ordering APC UPS units and parts: what we need

Send the full SKU, for example SRT3000XLI, and not only the VA rating. The letters carry meaning: an I in the suffix marks a 230 V international model, XL an extended-run version that accepts external battery packs, and RM a rack-mount form. For a new requirement, give load in watts, input and output voltage, required runtime, tower or rack format, and the plug or hardwire arrangement. For batteries, send the UPS SKU and serial number so the correct replacement battery cartridge can be found in APC documentation.

Replacement batteries, battery packs and spares
Most APC service work is battery work. APC Replacement Battery Cartridges, sold under RBC and APCRBC numbers, are sets of sealed valve-regulated lead-acid blocks that arrive pre-wired with the connectors for the UPS models they are listed for, so a weak battery can be changed as one unit and, on hot-swap models, without switching the load off. Some newer cartridges carry an -LI suffix for lithium-ion versions. External battery packs extend runtime on XL and SRT models, and are chained to the UPS through the battery connector on the rear panel. To find the right cartridge, send the UPS SKU and serial number; the same UPS can use different cartridges across hardware revisions.
Modular and three-phase APC systems
Symmetra LX and Symmetra RM: single-phase modular UPS frames with hot-swappable power modules, battery modules and intelligence modules, so a failed module can be exchanged while the load stays on protected power.Symmetra PX: three-phase modular UPS for data rooms, built from power modules with N+1 redundancy and battery modules for runtime.Smart-UPS VT: three-phase double-conversion UPS for small data rooms and technical buildings.Silcon: large three-phase UPS based on delta conversion, still running in many plants and data centres; spare part kits are listed in levels (SPL1 to SPL4) so sites can hold the parts that match their service plan.Easy UPS On-Line (SRV): cost-focused double-conversion units, many with external battery pack support.
APC UPS in Oman and GCC conditions
Oman supplies 240 V single-phase and 415 V three-phase at 50 Hz, so international models with an I suffix (230 V nominal, adjustable to 240 V on most Smart-UPS units) are the usual choice. Heat is the main enemy: most APC UPS units are rated for operation up to 40 °C, while summer shade temperatures in Muscat and the interior pass 45 °C, and a lead-acid battery loses roughly half its service life for every 10 °C above 25 °C. Install UPS and batteries in a cooled room, keep filters clean in dusty inland sites, and size the standby generator with margin for UPS input and battery charging current.
All APC UPS systems, batteries and accessories on this site are grouped under UPS and Batteries, and the wider Schneider Electric range can be quoted together with them.

Facts checked against APC by Schneider Electric's published history, October 2026.

Browse APC products by category: UPS and Batteries.
Need a replacement battery for an APC UPS you already run? Use our APC UPS replacement battery finder to match the model to its official RBC cartridge.

Frequently Asked Questions

What is the rated capacity of the APC SRV2KIL?
The APC SRV2KIL is rated at 1600 watts / 2000 VA with a 230V single-phase input and output.
Is the APC SRV2KIL a true online UPS?
Yes. The APC SRV2KIL uses double-conversion online topology, providing zero transfer time and full isolation from input voltage disturbances.
What is the input voltage range of the APC SRV2KIL?
The APC SRV2KIL accepts a wide 110-285V input range at 40-70Hz auto-sensing, making it tolerant of unstable utility and generator feeds.
Does the APC SRV2KIL support remote monitoring?
Yes. The APC SRV2KIL includes an Intelligent Card Slot for an optional SNMP network management card, alongside built-in serial and USB connectivity.
What applications is the APC SRV2KIL suited for in Oman?
Seven Star LLC supplies the APC SRV2KIL for mid-sized server racks, PLC control racks, PABX systems, and CCTV head-end equipment across Oman and the GCC.