Uvex phynomic pro 6006206 Aqua-Polymer Assembly Safety Gloves

The Uvex phynomic pro 6006206 is a thin assembly glove with a knitted cuff and a flexible coating on the palm and three quarters of the back of the hand. The page describes an aqua-polymer Pro coating that repels dirt and moisture and gives very good grip in damp, wet and oily areas, on a bamboo viscose, polyamide and elastane liner. The data sheet lists the coating as Plain-NBR, so confirm the coating description with the supplier if it matters for your specification.

The glove is aimed at tasks that need feel, such as assembly, valve and instrument work, small parts and maintenance. Performance is certified to EN 388:2016 as 2 1 2 1 X, which means level 2 abrasion, level 1 blade cut, level 2 tear and level 1 puncture, with no impact test (X).

Technical specification

Key features from the datasheet

The datasheet lists an ergonomic fit, good grip, excellent abrasion resistance and very good tactile feel. The page adds a high level of breathability and good moisture absorption thanks to natural fibres in the liner, a perfect fit via 3D Ergo technology, skin tolerance confirmed by dermatologists under the uvex pure standard and proDERM studies, and a bamboo-polyamide-elastane liner that feels comfortable on the skin.

How to read EN 388 2121X

The four numbers are mechanical performance levels. Abrasion 2 is a modest level, tear 2 also modest, blade cut 1 and puncture 1 are the lowest levels, and the X in the fifth position means the impact test was not carried out. This is a dexterity glove: it provides grip and light abrasion protection but is not a cut-resistant glove. For sharp materials such as sheet metal or glass, use a cut-protection glove like the uvex C500 on this site. For chemical handling, a coated glove does not replace a chemical-resistant glove and must be checked against the chemical.

Selection and ordering guide

The article number identifies the glove and size listing. The datasheet shows the whole phynomic pro range sizes 6 to 12 under material number 60062, so state the size you want when requesting a quotation. The uvex phynomic foam glove (6005005) uses a foam coating for lighter oil handling.

Applications in GCC industry

Typical uses include assembling and maintaining instrumentation, handling oily tools and fasteners, valve and flange work and warehouse picking, where the wearer needs to feel small parts. In hot climates the breathable natural-fibre liner reduces sweat build-up. The glove is rated for wet and oily environments rather than for hot surfaces or sharp edges.

Care and use

Follow the washing and storage instructions on the label, replace the glove when the coating is worn through, and keep the CE declaration of conformity from the uvex portal on file.

When quoting, give the glove size, because the datasheet lists sizes 6 to 12 under one material number. The glove is sold by the pair, lists EN ISO 21420:2020 as its general requirements standard and is made in Germany, with the manufacturer of record shown on the datasheet as UVEX SAFETY Gloves GmbH in Lüneburg.

Selection and use notes

Choose the size that fits closely so the glove keeps feel and does not wrinkle in the palm. Check the EN 388 and other marks against the task, wash according to the label and replace the gloves when the coating wears or the fingers thin.

Information needed for a quotation

Send the full model code, the quantity, the delivery location in Oman or the GCC, the intended use and any accessories needed, so that the complete package can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification and the site risk assessment before a purchase is confirmed. Ratings, standards and dimensions are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Frequently asked questions

What is the EN 388 rating of the phynomic pro?
2 1 2 1 X: abrasion level 2, blade cut level 1, tear level 2, puncture level 1, impact not tested.

Is it suitable for oily work?
The page lists it as suitable for wet and oily work environments, with very good grip in damp, wet and oily areas.

Is it a cut-resistant glove?
No. Its cut level is 1; for cut hazards choose a cut-protection glove with a higher level.

Which sizes are available?
The datasheet lists sizes 6, 7, 8, 9, 10, 11 and 12.

What should I confirm before ordering?
Confirm the size run, the coating description for your specification and the task hazards, then request a quotation with the part number 6006206.

Documents and quotation

The uvex phynomic pro product data sheet (material number 60062) is attached to this page; it covers sizes 6 to 12. Browse more products in Safety & PPE. Seven Star LLC is an independent supplier in Muscat; send the exact part number and quantity for a quotation, and confirm all ratings and approvals against the current manufacturer documents before ordering.