- AC Drives
- Industrial Communications
- PLC & I/O Cards
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- CCTV & Security
- Encoders
- Industrial Computers
- Safety Switches & Guard Locking
- HMI Displays
- Motor Soft Starters
- Isolator & Barrier
- Pneumatic Cylinders
- Servo Drives
- Automation Software
- Robotics
- Machine Vision
Brand: Turck
Turck TBEN-L5-16DOP Block I/O Module 16 PNP Outputs 2 A M12
Description
What the TBEN-L5-16DOP does
TBEN-L5-16DOP is an L5 multiprotocol I/O block with sixteen PNP digital outputs, each rated up to 2 A, on M12 connectors in a 60.4 x 230.5 x 38.8 mm housing.
The datasheet summarises the design with these points: ATEX zone 2/22; Shock and vibration tested; Fully potted module electronics; PROFINET S2 system redundancy; Protection classes IP65, IP67, IP69K; 2 × M12, 4-pin, D-coded, Ethernet fieldbus; Supports 10 Mbps/100 Mbps; Galvanically isolated voltage groups; Integrated Ethernet switch.
Technical specifications
| Parameter | Specification |
|---|---|
| Type | TBEN-L5-16DOP |
| Ident number | 6814087 |
| Supply voltage | 24 VDC |
| Admissible range | 18…30 VDC |
| Voltage supply connection | 7/8″, 5-pin |
| Operating current | V1: max. 150 mA |
| Sensor/actuator supply | supply of ports C0-C7 from V2 |
| Power dissipation, typical | ≤ 10 W |
| Fieldbus transmission rate | 10/100 Mbps |
| Fieldbus connection technology | 2 x M12, 4-pin, D-coded |
| Protocol detection | automatic |
| Web server | Default: 192.168.1.254 |
| Service interface | Ethernet via P1 or P2 |
| BEEP functionality | Supported |
| ARGEE functionality | Supported |
| ARGEE Firmware Version | 3.2.9.0 |
| ARGEE Engineering Version | 2.0.24.0 |
| Addressing | Static IP, DHCP |
| Supported function codes | FC1, FC2, FC3, FC4, FC6, FC15, FC16, FC23 |
| Number of TCP connections | 8 |
| Input register start address | 0 (0x0000 hex) |
| Output register start address | 2048 (0x0800 hex) |
| Quick Connect (QC) | < 150 ms |
| Device Level Ring (DLR) | supported |
| Class 3 connections (TCP) | 3 |
| Class 1 connections (CIP) | 10 |
| Input Assembly Instance | 101 |
| Output Assembly Instance | 102 |
Where it fits and how it behaves
Sixteen outputs at 2 A each make this a direct actuator driver: solenoid valves, small contactor coils, beacons and indicators can be wired at the machine instead of back to a control cabinet. Each output is short-circuit proof, and output delay is typically 1.3 ms. A 7/8-inch 5-pin power connector feeds the module, and the block supports MRP ring redundancy and PROFINET S2 system redundancy, details that matter on plants with high availability needs.
For commissioning, load the device description for your controller, check the supply voltage at the far end of long cable runs, set the I/O diagnostics you want mapped, and test every channel with a real sensor or load. Keep the Quick Start Guide at hand for firmware, web server and Ex-area notes.
Reading the type code before you order
Derived from the datasheet titles: TBEN is the Turck block Ethernet family, S1 and S2 are the compact 32 mm wide housings with M8 connections, L4 and L5 are the larger housings with M12 connections (L4 with a 4-pin and L5 with a 5-pin 7/8-inch supply connector in the feature list), DIP means digital PNP inputs, DOP digital PNP outputs and IOL IO-Link master channels. Ident number 6814087 identifies this exact module.
Points to confirm with us before ordering: the supply connector, the fieldbus protocol and firmware needed by your PLC, the number and type of channels, the connector style (M8 or M12) of your sensors and valves, and any hazardous-area conditions in the Quick Start Guide. Everything in the table comes from the datasheet as published, so the maker document is the final reference.
Documents and quotation
Download the Turck datasheet for TBEN-L5-16DOP and compare it with your drawing or loop data. Pricing and lead time are not shown on the page; Seven Star LLC, an independent supplier based in Muscat, quotes them on request. Quote the full type code TBEN-L5-16DOP so the correct variant is offered. More related items are listed under PLC & I/O Cards.
Datasheets & Documents
- Datasheet Turck TBEN-L5-16DOP Datasheet Download
Reviews (0)
About brand
Turck is a German manufacturer of sensors, connectivity and fieldbus technology for factory and process automation, founded in 1965 and headquartered in Mülheim an der Ruhr. The family-owned group develops and manufactures sensors, connectors, interface technology and I/O systems.
Seven Star LLC is an independent supplier in Muscat. We list Turck sensors and I/O devices for machine builders and maintenance teams in Oman and the GCC.
Turck product series
Most of the Turck products here are inductive proximity sensors: threaded M12, M18 and M30 barrels in flush (BI) and non-flush (NI) versions, uprated-range (U) sensors, rectangular CP40 and CP80 housings and BIM magnetic-field sensors for detecting pistons in pneumatic cylinders. The type code describes the sensor; in BI5-M18-AP6X-H1141, BI means flush mounting, 5 is the switching distance in mm, AP6X a three-wire PNP output and H1141 the M12 connector.
Turck also makes RU ultrasonic sensors, PS pressure, TS temperature and LS level sensors, FCI inline flow sensors, the CMVT vibration and temperature sensor for condition monitoring over IO-Link, and fieldbus and Ethernet I/O modules and communication components.
Where Turck sensors are used
Position detection on conveyors, packaging machines, presses and robotic cells; level, pressure and temperature monitoring on hydraulic units and process skids; and vibration monitoring on motors, pumps and fans.
Ordering Turck sensors: what we need
Send the full type code and the six- or seven-digit ID number printed on the sensor or its label. If the label is missing, give the housing size, flush or non-flush mounting, switching distance, output type (PNP or NPN, NO or NC), supply voltage and connection (cable or connector).
Browse Turck products by category: Inductive Proximity Sensors, Flow Indicators & Switches, Level Instrumentation, Pressure Instrumentation, Temperature Instrumentation, Vibration Monitoring.
Related products
Frequently Asked Questions
Which fieldbus protocols does TBEN-L5-16DOP support?
The datasheet feature list names PROFINET, EtherNet/IP and Modbus TCP, selected by automatic protocol detection.
What supply does TBEN-L5-16DOP need?
Supply voltage 24 VDC with an admissible range of 18…30 VDC, via 7/8″, 5-pin.
What are the housing and protection class of TBEN-L5-16DOP?
Datasheet protection class IP65 (the feature list also names IP67 and IP69K), ambient temperature -40…+70 °C, housing PA6-GF30.
Is TBEN-L5-16DOP listed for hazardous areas?
The feature list names ATEX zone 2/22 and CCC-Ex, and the datasheet refers to the Quick Start Guide for the conditions of use in Ex areas, which must be checked.
What should I confirm before ordering TBEN-L5-16DOP?
Confirm the supply connector, the fieldbus protocol and firmware needed by your PLC, the number and type of channels, the connector style (M8 or M12) of your sensors and valves, and any hazardous-area conditions in the Quick Start Guide.
Reviews
There are no reviews yet.