- Vibration Monitoring
- Industrial Communications
- PLC & I/O Cards
- AC Drives
- Automation Accessories
- Controllers & Data Acquisition
- Industrial Computers
- Encoders
- Safety Switches & Guard Locking
- CCTV & Security
- Isolator & Barrier
- Motor Soft Starters
- HMI Displays
- Pneumatic Cylinders
- Automation Software
- Servo Drives
- Robotics
- Machine Vision
Brand: Mitsubishi
Mitsubishi GT2712-STBA 12.1 in GOT2000 HMI Touch Panel
Description
A 12.1 inch multi-touch operator terminal for Mitsubishi Electric PLCs
The Mitsubishi Electric GT2712-STBA is the 12.1 inch AC-powered model of the GOT2000 GT27 series, which the catalogue describes as the advanced line with multi-touch gesture functions. Its SVGA 800 x 600 colour screen gives enough room for a full machine overview, trends and alarm lists on one page, and the front face is sealed to IP67F for use on machine doors and control desks.
The GOT connects to controllers over Ethernet, RS-232 and RS-422/485 as standard, and communication units can be added through the extension and side interfaces, so one terminal can sit on the same network as MELSEC iQ-F, iQ-R and other controllers, drives and servo amplifiers. USB host and device ports and an SD card slot handle project transfer and data logging.
Technical specifications
| Parameter | Specification |
|---|---|
| Series | GOT2000 GT27, the advanced model with multi-touch gesture functions |
| Screen / display | 12.1 inch TFT colour LCD, SVGA 800 x 600 dots, 65,536 colours; display area 246 x 184.5 mm |
| Brightness / backlight | 32 brightness levels; LED backlight (not replaceable), approx. 60,000 h at 25 C and 50 percent intensity |
| Touch panel | Analog resistive film, multi-touch gestures; two simultaneous touch points; life 1 million touches or more |
| Memory | Storage (ROM) 57 MB; operation (RAM) 256 MB (128 MB on function version B or earlier) |
| Power supply | GT2712-STBA / STWA: 100 to 240 V AC (+10 / -15 percent), 50/60 Hz; GT2712-STBD / STWD: 24 V DC (+25 / -20 percent) |
| Power consumption (AC types) | Maximum load 44 W or less; main unit 19 W; 10 W with backlight off (as read from the catalogue table) |
| Built-in interfaces | Ethernet 100BASE-TX / 10BASE-T (1 ch); RS-232 (1 ch, D-sub 9-pin); RS-422/485 (1 ch, D-sub 9-pin); USB 2.0 host and device; SDHC card slot to 32 GB |
| Expansion | Extension interface and side interface for communication units and option units |
| Clock and battery | Clock precision +/-90 seconds per month; GT11-50BAT lithium battery, approx. 5 years |
| Protection | Front IP67F with the USB cover closed; IP2X inside the control panel |
| Operating temperature / humidity | 0 to 55 C (5 C lower with some units fitted); 10 to 90 percent RH non-condensing; altitude 2000 m or less |
| Vibration / shock | JIS B 3502 and IEC 61131-2; 147 m/s2 shock, three times in each axis |
| External dimensions (W x H x D) | 316 x 246 x 52 mm |
| Panel cut dimensions (W x H) | 302 x 228 mm |
| Weight (without fitting) | 2.4 kg |
| Colour variants | GT2712-STBA / STBD black; GT2712-STWA / STWD white |
| Software | GT Works3 version 1.270G or later; screens designed in GT Designer3 |
Reading the model code and choosing a variant
The model name encodes the series, screen size, resolution, display type, panel colour and power type. In GT2712-STBA the 12 means 12.1 inch, S means SVGA, T means TFT colour, B means black and the final A means 100 to 240 V AC. Replace the last letter with D for a 24 V DC supply, or the colour letter with W for the white panel version, as listed in the catalogue product list.
Choose the AC type when the cabinet has mains supply and the DC type when the panel runs from a 24 V DC rail. Check the catalogue note that the operating ambient temperature limit drops by 5 C when a multimedia unit, certain network communication units or the oil protective cover are mounted.
Confirm before ordering: the supply voltage, panel colour, the PLC or drive protocol (and whether a communication unit is needed), the cut-out available in the panel, the GT Works3 version and the approvals required for your site. Compare with the smaller GT25 line, for example the Mitsubishi GT2510-VTBA, or browse the HMI and displays category; a MELSEC iQ-F controller such as the FX5U is a typical partner.
GT27 sizes compared
| Model | Screen | External size W x H x D (mm) | Weight |
|---|---|---|---|
| GT2715-XTBA | 15 in, XGA 1024 x 768 | 397 x 300 x 60 | 4.5 kg |
| GT2712-STBA | 12.1 in, SVGA 800 x 600 | 316 x 246 x 52 | 2.4 kg |
| GT2710-STBA | 10.4 in, SVGA 800 x 600 | 303 x 218 x 52 | 2.1 kg |
Documents and quotation
The attached file is an excerpt of Mitsubishi Electric GOT2000 catalogue L(NA)08270ENG-K: the series lineup pages, the general, performance and power specifications for the GT27, and the model naming list. For a quotation, send the full model code, supply type, quantity and destination to Seven Star LLC, an independent supplier in Muscat.
Datasheets & Documents
- Catalog Mitsubishi Electric GOT2000 catalogue L(NA)08270ENG-K, GT27 excerpt (selected pages) Download
Reviews (0)
About brand
Laboratories that run an NSX-2100 trace sulfur, nitrogen or chlorine analyzer usually know it as a Mitsubishi instrument. The nameplate reads Mitsubishi Chemical Analytech, a name later changed to Nittoseiko Analytech. Seven Star LLC lists the TN6RPC gas tube dryer set for this analyzer and sources NSX-2100 consumables for refinery and fuel-testing laboratories in Oman and the GCC.
The Mitsubishi listing also includes Mitsubishi Electric factory automation and drive products: MR-J3, MR-J5 and MR-JE servo amplifiers, GOT2000 and GOT SIMPLE HMI touch panels, FR-A800, FR-E800, FR-F800 and FR-CS80 FREQROL inverters, MELSEC iQ-F PLC modules, MELSEC A-series input and temperature modules with a memory cassette, and S-T magnetic contactors and TH-T thermal overload relays.
Mitsubishi NSX-2100 parts
The NSX-2100 was built with a horizontal or a vertical furnace, and one furnace can serve several detectors. The dryer set removes water from the combustion gas before it reaches the detector. Like the connection kits, it is a consumable, and its part code changes with the analyzer variant.
Ordering NSX-2100 consumables: what we need
Send the part code, for example TN6RPC, together with the exact analyzer model shown on the nameplate (the letters after NSX-2100 indicate furnace type and detectors), the serial number and the detectors fitted. Some original part codes have been replaced by newer ones, so we check each code against the manufacturer's current parts list before quoting.
Browse Mitsubishi products by category: Gas Analyzer Accessories.
Related products
Frequently Asked Questions
What screen does the GT2712-STBA have?
A 12.1 inch TFT colour LCD with SVGA 800 x 600 resolution and 65,536 colours.
What is the supply voltage of the STBA version?
100 to 240 V AC, 50/60 Hz. The STBD version takes 24 V DC.
What are the panel cut dimensions?
302 x 228 mm, with external dimensions of 316 x 246 x 52 mm.
Which interfaces are built in?
Ethernet, RS-232, RS-422/485, USB host and device, and an SD card slot.
What protection rating does the front face have?
IP67F at the front with the USB cover closed; IP2X inside the control panel.
Reviews
There are no reviews yet.