- Automation & ControlView all 2,896 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Weidmüller
Weidmuller 1334710000 UR20-PF-I Input Power-Feed Module
Description
Weidmuller 1334710000 UR20-PF-I: the input power-feed module
Weidmuller 1334710000 is the UR20-PF-I, a power-feed module for the u-remote system that supplies a segment of input modules with 24 V DC. It re-feeds up to 10 A into the input current path, so a long row of digital and analogue input modules can be powered without overloading the coupler. A diagnosis display monitors the voltage, and the standard u-remote PUSH IN plug is used for the connection.
What the datasheet says about 1334710000
The module is a 24 V DC input power supply unit with a supply voltage tolerance of plus 20 percent and minus 15 percent. It draws less than 10 mA from its own segment, feeds up to 10000 mA into the input path, and is 11.5 mm wide, 120 mm high and 76 mm deep with a net weight of 76 g. Wire sizes are 0.14 to 1.5 mm². Surge voltage category is II and pollution severity 2. Its carbon footprint is 7.959 kg CO2 equivalent from cradle to gate. It is compatible with the complete u-remote fieldbus list: PROFINET IRT/RT, PROFIBUS DP-V1, EtherCAT, Modbus/TCP, EtherNet/IP, CANopen, DeviceNet, POWERLINK, CC-Link, CC-Link IE TSN and IEC 61162-450.
Technical table for 1334710000
| Parameter | Value |
|---|---|
| Order No. / Type | 1334710000 / UR20-PF-I |
| Version | Remote I/O module, IP20, power supply unit, 24 VDC input |
| Module type | Power-feed module |
| Supply | 24 V DC +20 percent / minus 15 percent |
| Feed current IIN | 10000 mA maximum |
| Own consumption | less than 10 mA |
| Diagnosis | voltage diagnosis display |
| Connection | PUSH IN, 0.14 to 1.5 mm² |
| Dimensions / weight | 11.5 x 120 x 76 mm / 76 g |
| Mounting | TS 35 |
| Temperature | operating minus 20 to 60 C; storage minus 40 to 85 C |
| Test voltage | 500 V |
| Vibration | 1 g, 8.4 to 150 Hz |
| Approvals | cULus E141197; cULusEX E223527 |
| Pack | 1 item |
How 1334710000 differs from other power-feed and coupler parts
The PF-I feeds the input path only. A separate output-side power-feed module serves the output path, and the fieldbus coupler (for instance the UR20-FBC-EC, 1334910000) also provides a limited feed of 10 A for each path. Use a PF-I when the input segment would exceed the coupler feed capability or when you want to create a separate galvanic section for inputs. It has no I/O channels of its own and uses no process data.
Planning with 1334710000
Add up sensor supply currents of all input modules in a segment: for instance, the UR20-4AI-UI-16 can supply up to 750 mA per module to sensors. When the sum approaches 10 A, insert a PF-I before the next group. Place feeds in the rail row so that the system supply is never more than the coupler permits.
Installation of 1334710000
Clip the module onto the rail next to the modules it supplies, wire 24 V DC and 0 V with PUSH IN conductors, and protect the supply by a suitable fuse or power supply with short-circuit limitation. The diagnosis display indicates when voltage is present.
Maintenance of 1334710000
No wearing parts. If the display shows missing voltage, check the upstream 24 V DC feeder and the fuse before replacing the module.
Segment design rules around 1334710000
A u-remote row is divided into current segments. The coupler supplies the first segment, and each power-feed module starts a new segment of input or output supply. When you use a PF-I you create a fresh input path with its own 10 A budget while the system bus current stays shared. That is helpful in two situations. First, when many 3-wire sensors with high supply currents are connected, for example the 750 mA sensor supply of an analogue card or numerous inductive proximity sensors on digital cards. Second, when you want to isolate part of the row from another supply, for example a section fed through a separate safety supply.
Remember that the PF-I has no channels, so it does not appear in the process image. The datasheet shows block and connection diagrams that should be consulted before wiring, and the module requires a 24 V DC supply within the tolerance of plus 20 and minus 15 percent. Protect the feed with a fuse or an electronically limited power supply sized for 10 A, and make sure the cable cross-section is suitable for the full current through the PUSH IN terminals.
Ordering and spares notes for 1334710000
Order the PF-I together with the modules it will supply, so that segment boundaries can be planned before cabinet layout is frozen. A single spare is usually enough for a plant, since the module has no processing components, but make sure the spare is tested for voltage indication before it is stored. When listing the item on a bill of materials, add the supply fuse or power supply that will feed it, and the cable size for the 10 A path, because the module itself cannot protect the upstream wiring. Where two segments are fed from the same 24 V DC power supply, keep separate fuses for each feed so that a short circuit in one segment does not drop the other, and record the fuse ratings and cable lengths in the cabinet documentation for later audits. Quote quantities in single units; the datasheet lists a pack of one item. Typical commissioning checks include measuring the 24 V DC at the plug with a multimeter, confirming that the diagnosis display lights, and loading the segment gradually while watching the voltage drop at the far end of the row.
Documents and quotation
The datasheet for 1334710000 accompanies this page. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with 1334710000, quantity and delivery location to receive a quotation.
Installation and Commissioning Planning
Planning ahead shortens downtime when a Weidmüller 1334710000 goes into service. Confirm the available mounting space, cable entry or process connection, and the tools and spare seals needed on the day. Keep the existing configuration or calibration data so the new unit can be set up to match, and check that loop drawings and the asset register are updated after the swap. If the installation has to fit a short shutdown window, tell us the date when you request a quotation so that delivery of the Weidmüller equipment can be planned around it.
Other Models in the Ur20 Range
Seven Star LLC supplies models from the Ur20 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Weidmuller 1334910000 UR20-FBC-EC EtherCAT Coupler | PLC & I/O Cards | View details |
| Weidmuller 1315620000 UR20-4AI-UI-16 Analogue Input | PLC & I/O Cards | View details |
| Weidmuller 1334710000 UR20-PF-I Input Power-Feed Module | Power Modules | You are viewing this model |
Datasheets & Documents
- Datasheet Weidmuller 1334710000 UR20-PF-I Input Power-Feed Module Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.
Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.
Weidmüller company profile
| Founded | 1850, Germany |
|---|---|
| Headquarters | Detmold, Germany (since 1948) |
| Ownership | Family-owned |
| Revenue | Over €1 billion (2023) |
| Product families | Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools |
Milestones
- 1850: Weidmüller is founded.
- 1948: The company is re-established in Detmold.
Weidmüller products listed here
The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.
Weidmüller products we list
Ordering Weidmüller parts: what we need
Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.
Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.
Browse Weidmüller products by category: Electrical & Power Modules.
FAQ
Questions about the Weidmuller 1334710000 UR20-PF-I Input Power-Feed
Answers from our engineering team on installation, compatibility and integration.
01What does 1334710000 do?
It is the UR20-PF-I power-feed module that supplies 24 V DC to the input current path of a u-remote segment.
02How much current can it feed?
Up to 10 A, listed in the datasheet as 10000 mA for the input current path.
03Does it have a status indicator?
Yes, a voltage diagnosis display monitors the supplied voltage.
04Does it need process data?
No. It is a power-feed module without I/O channels; the datasheet lists module type as power-feed module.
05What is the module size?
11.5 mm wide, 120 mm high, 76 mm deep, net weight 76 g, for TS 35 rail.


















Reviews
There are no reviews yet.