- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Parker
Parker NB8X1 Parflex Black Nylon Tubing 8 mm
Description
NB8X1 black nylon tubing, 8 mm outside diameter
The Parker NB8X1 is black polyamide (nylon) tubing from the Parflex range, supplied in 100 ft, 30.5 m lengths. The tube has an outside diameter of 8 mm (0.315 inch) and an inside diameter of 6 mm (0.236 inch). Parker describes this nylon tubing as abrasion-resistant, heat and light-stabilised nylon that operates at up to 200°F (93°C), with low water absorption and good chemical resistance.
Seven Star LLC supplies Parker NB8X1 in Oman and the GCC for pneumatic, lubrication and light fluid-transfer lines. The sections below give the verified data from the Parker product page, selection advice and installation notes.
What the part number NB8X1 tells you
The number Parker NB8X1 follows the Parflex nylon tubing pattern: NB = black nylon, 8 = 8 mm outside diameter, X1 = 1 mm wall (as shown by the 8 mm OD and 6 mm ID). The inside diameter and wall figures in the table are those published for the part, so you can compare it with other sizes before ordering.
Tubing is sold by the length shown in the table (100 ft, 30.5 m per package) and is cut to length on site. Specify the number of packages, not the number of metres, in your enquiry for NB8X1.
Parker NB8X1 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Parker Parflex / NB8X1 |
| Product | Nylon tubing (polyamide, PA) |
| Colour | Black |
| Order size | 8MM |
| Outside diameter | 8 mm (0.315 inch) |
| Inside diameter | 6 mm (0.236 inch) |
| Maximum operating pressure | 247 psi, 17 bar |
| Minimum burst pressure | 986 psi, 68 bar |
| Operating temperature | -65 °F to 200 °F (-54 °C to 93 °C) |
| Minimum bend radius | 1.14 inch, 29 mm |
| Weight | 0.016 lb/ft, 0.024 kg/m |
| Length per package | 100 ft, 30.5 m |
| Compatible fittings | Compression, Flow Controls, Prestolok® |
| Media | Air, chemicals, hydraulic fluids, lubricants, mild chemicals (pesticides), water |
| Applications | Fluid transfer, lubrication, pneumatics, machine tools, robotics |
Values come from the Parker product page for NB8X1. The listed maximum operating pressure refers to the tube under the conditions in the Parker datasheet; always confirm the pressure at your actual operating temperature, because nylon loses pressure capability as it gets warmer.
Pressure, temperature and bend radius for NB8X1
The maximum operating pressure of the NB8X1 is 247 psi, 17 bar with a minimum burst pressure of 986 psi, 68 bar, so the burst figure is about four times the working pressure, a typical safety margin for plastic tubing. The operating temperature range is -65°F to 200°F (-54°C to 93°C). Keep the tube away from hot surfaces such as exhaust manifolds, sun-baked steel and steam lines, which can push the tube above its upper limit.
The minimum bend radius is 1.14 inch, 29 mm. A smaller radius will kink the tube and restrict the flow, so use elbows or fitting angles at tight corners and support the tube with clips at regular intervals.
The black colour reduces light transmission and algae growth in water and chemical lines, and the 8 mm metric size suits European-style pneumatic and instrument air equipment common on imported skids.
Fittings and connection of the NB8X1
Parker lists these compatible fitting families for NB8X1: Compression, Flow Controls, Prestolok®. Push-in and compression fittings need a clean square cut: use a dedicated tube cutter, not scissors or a saw, so the end is round and free from burrs.
When assembling compression fittings on nylon tube, use the correct insert or support sleeve if the fitting calls for one, and make sure the tube is pushed fully into the fitting before tightening.
Where the NB8X1 fits in the system
The NB8X1 is a general-purpose flexible tube, used between a source such as an air header, a lubricator or a pump and the device it serves. It is not a replacement for stainless steel instrument tube on high-pressure process lines; for those lines use stainless steel tubing and fittings such as the A-LOK® 4SC4-316 union, with ball valves such as 4A-B6LJ2-SSP.
Within the same nylon family the sizes NN-4-040, NN-5-040, NB4X.65 are offered with different colours and diameters, so you can colour-code lines and standardise on one fitting type per size.
Selection checklist for the NB8X1
- Size: outside diameter 8 mm (0.315 inch); check the fittings in the plant use the same size, and confirm inch or metric.
- Pressure: confirm the working pressure of 247 psi, 17 bar at the actual operating temperature.
- Medium: air, water, hydraulic oil, lubricants and mild chemicals are listed; strong acids, solvents and oxidisers are not covered.
- Colour: black; choose the colour that suits your marking scheme.
- Temperature: -65°F to 200°F; keep away from hot surfaces.
- Bend radius: 1.14 inch, 29 mm minimum; plan routes around it.
- Package size: 100 ft, 30.5 m per package.
Installation and handling of the NB8X1
- Unroll the tube straight and avoid twisting it; use a tube cutter for square cuts.
- Route the tube away from sharp edges, heat sources and moving parts, and clip it every 300 to 500 mm.
- Leave a small loop of slack at the connection points to absorb vibration and thermal movement.
- Test the system at working pressure before putting it into service, and check the fittings again after the first heating cycle.
- Store unused tube coiled loosely, out of direct sun, to limit ageing of the nylon.
Typical applications in Oman and the GCC
In Oman and the GCC nylon tubing like the NB8X1 is used for instrument air branches, pneumatic actuator supply, centralised lubrication, water and coolant lines on machine tools and light chemical dosing. Heat is the main enemy: tube in direct sun or beside hot pipework should be shielded, and in desert environments UV and dust make a protective conduit or tray a good idea for outdoor runs. The light weight and ease of cutting also make nylon tubing convenient for workshop and skid assembly.
Typical uses include air lines to control valves and cylinders, lubrication lines on rotating equipment and fluid transfer in laboratory and test rigs.
Nylon tubing sizes compared with the NB8X1
| Part number | Colour | OD | ID | Max pressure | Package |
|---|---|---|---|---|---|
| NN-4-040 | Natural | 1/4 inch | 0.170 inch | 310 psi | 250 ft |
| NN-5-040 | Natural | 5/16 inch | 0.233 inch | 250 psi | 250 ft |
| NB4X.65 | Black | 4 mm (0.157 inch) | 2.7 mm (0.106 inch) | 300 psi | 100 ft |
| NB8X1 | Black | 8 mm (0.315 inch) | 6 mm (0.236 inch) | 247 psi | 100 ft |
Information to send with an RFQ for NB8X1
- Part number NB8X1 and number of packages.
- Fluid, working pressure and temperature.
- Fittings that the tube will connect to.
- Delivery location in Oman or the GCC.
Documents and quotation
The official Parker Parflex catalog 4660 (2020 edition, updated May 2023, English) is attached on this page as a PDF; its nylon tubing section covers the N Series used for the Parker NB8X1. The nylon tubing pages list the outside and inside diameters, the working and burst pressures at temperature, the minimum bend radius, the colours, the standard pack lengths and the compatible push-to-connect and compression fittings. Check the tube size, the working pressure at your temperature and the pack length you need, then send us the quantity and the delivery location for a quotation.
Seven Star LLC supplies NB8X1 in Oman and the GCC, together with matching fittings and valves. Send your RFQ with the details above.
Other Models in the Parker Parflex Nylon Tubing Range
Seven Star LLC supplies models from the Parker Parflex Nylon Tubing range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Parker NN-4-040 Parflex Natural Nylon Tubing 1/4 inch | Automation Accessories | View details |
| Parker NN-5-040 Parflex Natural Nylon Tubing 5/16 inch | Automation Accessories | View details |
| Parker NB4X.65 Parflex Black Nylon Tubing 4 mm | Automation Accessories | View details |
| Parker NB8X1 Parflex Black Nylon Tubing 8 mm | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet Parker Parflex Thermoplastic Hose, Tubing and Fittings Catalog 4660 (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Parker Hannifin is an American manufacturer of motion and control technologies, founded in 1917 in Cleveland, Ohio, by Arthur L. Parker as the Parker Appliance Company. Its first product was a pneumatic brake system for trucks and buses. In 1957 the company bought Hannifin, a maker of hydraulic and pneumatic cylinders and valves, and took the Parker Hannifin name. It is headquartered in the Cleveland area and listed on the New York Stock Exchange.
Seven Star LLC supplies the Parker items that maintenance teams request most: Lucifer solenoid valves, including NAMUR types for actuated valves, along with filter elements and hydraulic gear pumps.
Parker company profile
| Founded | 1917, Cleveland, Ohio, USA, by Arthur L. Parker |
|---|---|
| Headquarters | Cleveland area, Ohio, USA |
| Ownership | Public company, New York Stock Exchange (PH), listed since 1964 |
| First product | Pneumatic brake system for trucks and buses |
| Product families | Hydraulic pumps, cylinders and valves, pneumatic valves and FRLs, instrumentation fittings and valves, hoses and couplings, filtration (including Racor and Velcon), seals and O-rings |
Milestones
- 1917: Arthur L. Parker starts the Parker Appliance Company in Cleveland.
- 1924: Parker restarts the business after a 1919 accident destroyed its inventory.
- 1957: Parker acquires Hannifin and becomes Parker Hannifin.
- 1964: The shares are listed on the New York Stock Exchange.
Parker product lines listed here
Most of the listing is Lucifer, the Parker solenoid valve line that many nameplates still show as a brand in its own right. The 341N types (341N01, 341N22, 341N31) are NAMUR-interface valves that bolt straight onto a pneumatic actuator to pilot it. The E131K03 is a direct-acting 3/2 valve, and the 322K4706 and 7341NAKBHNM0 are further Lucifer solenoid valves. Parker sells Lucifer valve bodies and their coils or electrical parts as separate items, so one body can be combined with different voltages and enclosure types.
Other Parker lines appear: a hydraulic gear pump (P51A478BEY25-07-ZY), a coalescing filter element (9000040001) and a Triple-Lok 37-degree flare tube fitting.
Where Parker components are used
Lucifer NAMUR valves sit on quarter-turn actuators for on-off and shutdown valves in oil and gas, power and water plants across the GCC. Line-mounted solenoid valves switch instrument air, water, steam and light oils on skids and machines. Gear pumps drive hydraulic power units and mobile equipment, and coalescing elements protect instrument air and gas sampling systems from oil and water aerosols.
Parker products we list
Ordering Parker parts: what we need
Parker part numbers are long and every character counts. Please send:
- Solenoid valves: valve number from the body, coil or electrical part number, voltage and frequency, and the Ex marking if the coil is certified
- Gear pumps: the complete code from the nameplate, including the assembly number, which fixes displacement, shaft, ports and rotation
- Filter elements: element number and the housing model it fits
A photo of the nameplate is welcome. We check the code against Parker documentation and identify the manufacturer's current equivalent if a number has been superseded.
Facts checked against Parker's centennial timeline and the Encyclopedia of Cleveland History, October 2026.
Browse Parker products by category: Solenoid Valve, Filtration Elements, Pumps.
FAQ
Questions about the Parker NB8X1 Parflex Black Nylon Tubing 8 mm
Answers from our engineering team on installation, compatibility and integration.
01What is the NB8X1?
It is black Parker Parflex nylon (polyamide) tubing, 8 mm (0.315 inch) outside diameter and 6 mm (0.236 inch) inside diameter, supplied in 100 ft, 30.5 m lengths.
02What pressure can the NB8X1 handle?
Parker lists a maximum operating pressure of 247 psi, 17 bar and a minimum burst pressure of 986 psi, 68 bar. Pressure capability falls as temperature rises, so check your actual operating conditions.
03What temperatures can the NB8X1 withstand?
The listed operating range is -65 °F to 200 °F (-54 °C to 93 °C). It should not be used near hot surfaces or steam lines that exceed this range.
04Which fittings can be used with the NB8X1?
Parker lists compatible fittings: Compression, Flow Controls, Prestolok®. Use a clean square cut and push the tube fully into the fitting.
05What is the minimum bend radius of the NB8X1?
The minimum bend radius is 1.14 inch, 29 mm. A tighter bend will kink the tube, reduce the flow and may shorten the life of the line.


















Reviews
There are no reviews yet.