Brand:

Parker 6MSC4N-316 A-LOK Npt Male Connector, 3/8″ Tube, 316 SS

Description

6MSC4N-316 316 stainless steel A-LOK NPT male connector for 3/8" tube

The Parker 6MSC4N-316 is an A-LOK® NPT male connector in 316 stainless steel for 3/8" outside diameter instrument tube and a 1/4" NPT male pipe thread. A-LOK® is Parker's double-ferrule compression tube fitting: a front and a back ferrule grip and seal the tube as the nut is tightened, giving a leak-tight joint without welding or flaring. Parker designs the range for process instrumentation, analytical sampling and general industrial tubing where vibration, pressure cycling and corrosive media rule out weaker joints.

Seven Star LLC supplies Parker 6MSC4N-316 in Oman and the GCC. The sections below explain what the number means, list the dimensions and pressure data from the Parker CPI/A-LOK catalogue and the Parker product page, and cover assembly, selection and the matching CPI™ equivalent 6-4 FBZ.

Reading the part number 6MSC4N-316

Parker A-LOK® inch part numbers use the tube size, the body style designator, a second size or thread, the thread type where relevant and the material, in that order. The Parker 6MSC4N-316 decodes as follows.

Code Meaning
6 Tube size in sixteenths of an inch: 6 = 3/8" outside diameter
MSC male connector (body style)
4 Pipe thread size in sixteenths: 1/4" pipe thread
N Thread type: NPT, American national pipe taper (ANSI B1.20.1)
-316 Material: 316 stainless steel (the A-LOK® designator for Type 316)

The matching CPI™ single-ferrule number for the same body is 6-4 FBZ. CPI™ and A-LOK® parts are not the same ferrule system, so keep each connection on its own system.

Parker 6MSC4N-316 technical specifications

Parameter Specification
Manufacturer / part number Parker / 6MSC4N-316
Fitting system A-LOK® double-ferrule compression tube fitting
Style Tube to male pipe thread connection
Tube outside diameter 3/8 in
Pipe thread 1/4 in NPT male
Material 316 stainless steel (AISI 316)
Overall length A 1.57 in
Dimension C 0.76 in
Dimension D 1.28 in
Dimension R 0.56 in
Hex 5/8 in
Nut thread on tube end 9/16-20
Tube insertion depth (finger tight) 0.67 in
Working pressure range (seamless 316 tube, ambient) 3300 to 6600 psi depending on wall thickness

Dimensions are the reference values in the Parker CPI/A-LOK catalogue 4230/4233 and are measured finger tight. The pressure range reflects the catalogue working pressure table for seamless 316 stainless steel tube at ambient temperature; it depends on tube outside diameter and wall thickness, not on the fitting body alone.

How the 6MSC4N-316 seals

When the nut of the 6MSC4N-316 is tightened onto the body, the back ferrule drives the front ferrule into the tube wall and onto the tapered seat in the body. The front ferrule creates the primary seal and the back ferrule grips the tube, which provides the vibration resistance and the support that makes the double-ferrule design suitable for pressure cycling. The tube must reach the shoulder inside the fitting, which is why the insertion depth of 0.67 in is listed for 3/8" tube.

Parker states that stainless steel fittings work on seamless and on welded-and-redrawn, fully annealed 304, 316 and 316L tube, and recommends that the tube and fitting be of the same material (brass fittings with copper tube are the exception). The tube needs to be round, free of scratches at the fitting seat and square-cut and deburred.

This is a reducing male connector: it joins 3/8" tube to a smaller 1/4" NPT port, so it lets a larger tube run reach a standard instrument port without a separate bushing.

Pressure ratings for tube used with the 6MSC4N-316

For 3/8" seamless 316 stainless steel tube Parker lists these maximum allowable working pressures at ambient temperature: 3300 psi at 0.035 in wall, 4800 psi at 0.049 in wall, 6600 psi at 0.065 in wall. For welded 316 tube the figures are lower: 2800 psi at 0.035 in wall, 4100 psi at 0.049 in wall, 5600 psi at 0.065 in wall. Always choose the tube wall for the pressure first and confirm that the wall is within the fitting range.

The 1/4 in NPT thread is a limit of its own: Parker notes that where a male or female pipe thread is the second end of a fitting, the pipe thread can be the factor that limits the pressure of the system, so check the pipe-end rating table for the installed assembly.

Where the 6MSC4N-316 fits in the system

The 6MSC4N-316 is a connection part in an instrument or sample tubing system. It is used together with tube, valves and manifolds: a needle valve such as 4A-V4LN-SS or a ball valve such as 4A-B6LJ2-SSP can sit directly on the same tube, and an H Series manifold such as HDS3MA connects the process to a transmitter through the same tubing.

Related parts in the same A-LOK® range include 4MSC4N-316, 4MSC2N-316, 8MSC8N-316. Other fitting bodies from the same range that are often ordered on the same line are 4SC4-316, 6SC6-316, 8SC8-316, 4EE4-316.

Selection checklist for the 6MSC4N-316

  • Tube outside diameter: 3/8"; measure the actual tube and check for out-of-round or scratches.
  • Tube material and wall: confirm it is a tube material that Parker lists for A-LOK®, ideally 316 stainless steel, and compare the wall with the pressure table.
  • Thread: 1/4" NPT male on the pipe end; confirm the mating port is NPT and not BSP, and plan a thread sealant.
  • Material of the line: use 316 for stainless tube; other materials such as brass or steel are separate numbers.
  • Options: oxygen cleaning (suffix C3), nylon ferrules (ZYF), lock wire holes (LWH) or nickel plating (NIC) are separate options that must be written in the order.
  • Do not mix ferrules or nuts from different tube fitting brands; use A-LOK® ferrules with A-LOK® bodies.

Assembly, remake and maintenance of the 6MSC4N-316

  1. Cut the tube square, deburr inside and outside and clean it; do not use a cutter that crushes the tube.
  2. Insert the tube fully into the body of the 6MSC4N-316 until it bottoms on the shoulder.
  3. Tighten the nut following the assembly, remake and gaugeability instructions in Parker catalogue 4230/4233.
  4. Pressure-test the joint with an inert gas or the system fluid before putting the line into service.
  5. To remake a joint, follow the remake instructions in the Parker catalogue and replace the ferrules if the tube has been changed or damaged.

Keep a spare set of nuts and ferrules for each tube size. Any joint that is leaking after remake should be taken apart, inspected for scratches on the tube and replaced if the tube end is damaged.

Typical applications in Oman and the GCC

In Oman and the GCC, 316 stainless steel A-LOK® fittings such as the 6MSC4N-316 are used on offshore and onshore oil and gas instrumentation, gas processing, power stations, desalination plants and petrochemical complexes. Chloride in sea air, high humidity and wide temperature swings in summer and winter nights are hard on carbon steel and brass tube fittings, and stainless steel is the usual choice for exposed instrument tubing. Sand and dust also make it important to keep tubing ends capped until assembly.

Typical roles for the 6MSC4N-316 are connecting instrument tubing to transmitters, gauges and valves with NPT ports, and to threaded process connections on tapping points.

A-LOK fitting family compared with the 6MSC4N-316

Part number Style Tube OD Pipe thread CPI equivalent
4MSC4N-316 NPT male connector 1/4" 1/4" NPT 4-4 FBZ
4MSC2N-316 NPT male connector 1/4" 1/8" NPT 4-2 FBZ
6MSC4N-316 NPT male connector 3/8" 1/4" NPT 6-4 FBZ
8MSC8N-316 NPT male connector 1/2" 1/2" NPT 8-8 FBZ
4SC4-316 union 1/4" – 4-4 HBZ
6SC6-316 union 3/8" – 6-6 HBZ
8SC8-316 union 1/2" – 8-8 HBZ
4EE4-316 union elbow 1/4" – 4-4 EBZ
4ET4-316 union tee 1/4" – 4-4-4 JBZ

Information to send with an RFQ for 6MSC4N-316

  • Part number 6MSC4N-316 and quantity.
  • Tube outside diameter, wall thickness and material.
  • Operating pressure, temperature and fluid.
  • Mating thread type and size, if any.
  • Special options such as oxygen cleaning, and the delivery location in Oman or the GCC.

Documents and quotation

The official Parker Instrumentation Products Division catalog 4230/4233 for CPI and A-LOK tube fittings (English) is attached on this page as a PDF and includes the Parker 6MSC4N-316. It contains the A-LOK two-ferrule design notes, the dimension tables for each fitting shape, the tube wall thickness and pressure rating tables, the assembly and gap-gauge instructions and the part-number system. Check the tube outside diameter, the wall thickness and the thread against your installation, then send us the quantity and the delivery location for a quotation.

Seven Star LLC supplies 6MSC4N-316 in Oman and the GCC, together with tube, valves and manifolds to complete the installation. Send your RFQ with the details above.

Other Models in the Parker Alok Fittings Range

Seven Star LLC supplies models from the Parker Alok Fittings range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Parker 4MSC4N-316 A-LOK Npt Male Connector, 1/4″ Tube, 316 SSAutomation AccessoriesView details
Parker 4MSC2N-316 A-LOK Npt Male Connector, 1/4″ Tube, 316 SSAutomation AccessoriesView details
Parker 6MSC4N-316 A-LOK Npt Male Connector, 3/8″ Tube, 316 SSAutomation AccessoriesYou are viewing this model
Parker 8MSC8N-316 A-LOK Npt Male Connector, 1/2″ Tube, 316 SSAutomation AccessoriesView details
Parker 4SC4-316 A-LOK Union, 1/4″ Tube, 316 SSAutomation AccessoriesView details
Parker 6SC6-316 A-LOK Union, 3/8″ Tube, 316 SSAutomation AccessoriesView details
Parker 8SC8-316 A-LOK Union, 1/2″ Tube, 316 SSAutomation AccessoriesView details
Parker 4EE4-316 A-LOK Union Elbow, 1/4″ Tube, 316 SSAutomation AccessoriesView details
Parker 4ET4-316 A-LOK Union Tee, 1/4″ Tube, 316 SSAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Parker CPI / A-LOK Tube Fittings Catalog 4230/4233 (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Parker Hannifin is an American manufacturer of motion and control technologies, founded in 1917 in Cleveland, Ohio, by Arthur L. Parker as the Parker Appliance Company. Its first product was a pneumatic brake system for trucks and buses. In 1957 the company bought Hannifin, a maker of hydraulic and pneumatic cylinders and valves, and took the Parker Hannifin name. It is headquartered in the Cleveland area and listed on the New York Stock Exchange.

Seven Star LLC supplies the Parker items that maintenance teams request most: Lucifer solenoid valves, including NAMUR types for actuated valves, along with filter elements and hydraulic gear pumps.

Parker company profile

Founded 1917, Cleveland, Ohio, USA, by Arthur L. Parker
Headquarters Cleveland area, Ohio, USA
Ownership Public company, New York Stock Exchange (PH), listed since 1964
First product Pneumatic brake system for trucks and buses
Product families Hydraulic pumps, cylinders and valves, pneumatic valves and FRLs, instrumentation fittings and valves, hoses and couplings, filtration (including Racor and Velcon), seals and O-rings

Milestones

  • 1917: Arthur L. Parker starts the Parker Appliance Company in Cleveland.
  • 1924: Parker restarts the business after a 1919 accident destroyed its inventory.
  • 1957: Parker acquires Hannifin and becomes Parker Hannifin.
  • 1964: The shares are listed on the New York Stock Exchange.

Parker product lines listed here

Most of the listing is Lucifer, the Parker solenoid valve line that many nameplates still show as a brand in its own right. The 341N types (341N01, 341N22, 341N31) are NAMUR-interface valves that bolt straight onto a pneumatic actuator to pilot it. The E131K03 is a direct-acting 3/2 valve, and the 322K4706 and 7341NAKBHNM0 are further Lucifer solenoid valves. Parker sells Lucifer valve bodies and their coils or electrical parts as separate items, so one body can be combined with different voltages and enclosure types.

Other Parker lines appear: a hydraulic gear pump (P51A478BEY25-07-ZY), a coalescing filter element (9000040001) and a Triple-Lok 37-degree flare tube fitting.

Where Parker components are used

Lucifer NAMUR valves sit on quarter-turn actuators for on-off and shutdown valves in oil and gas, power and water plants across the GCC. Line-mounted solenoid valves switch instrument air, water, steam and light oils on skids and machines. Gear pumps drive hydraulic power units and mobile equipment, and coalescing elements protect instrument air and gas sampling systems from oil and water aerosols.

Parker products we list

Family Examples
Solenoid Valves 7341NAKBHNM0 Lucifer Series Solenoid Valve, Lucifer 322K4706 2-Way Solenoid Valve, Lucifer 341N01 NAMUR Solenoid Valve, Lucifer 341N22 SOLENOID VALVE, Lucifer 341N31 NAMUR Solenoid Valve, Lucifer E131K03 Solenoid Valve
Filtration Elements 9000040001 Coalescing Filter Element
Pumps P51A478BEY25-07-ZY Hydraulic Gear Pump
Pipes & Fittings Triple-Lok 37° Flare Tube Fitting

Ordering Parker parts: what we need

Parker part numbers are long and every character counts. Please send:

  • Solenoid valves: valve number from the body, coil or electrical part number, voltage and frequency, and the Ex marking if the coil is certified
  • Gear pumps: the complete code from the nameplate, including the assembly number, which fixes displacement, shaft, ports and rotation
  • Filter elements: element number and the housing model it fits

A photo of the nameplate is welcome. We check the code against Parker documentation and identify the manufacturer's current equivalent if a number has been superseded.

Facts checked against Parker's centennial timeline and the Encyclopedia of Cleveland History, October 2026.

FAQ

Questions about the Parker 6MSC4N-316 A-LOK Npt Male Connector, 3/8″

Answers from our engineering team on installation, compatibility and integration.

01What does 6MSC4N-316 mean?
The number decodes as 3/8" tube, male connector, 1/4" NPT thread and 316 stainless steel. The part is part of the A-LOK® double-ferrule range.
02What working pressure applies to the 6MSC4N-316?
The fitting works with the pressure table of the tube: for 3/8" seamless 316 tube the catalogue lists 3300 to 6600 psi depending on wall thickness. A pipe thread may be the limiting factor.
03Is the 6MSC4N-316 the same as the CPI equivalent 6-4 FBZ?
The body type and size are the same, but A-LOK® is a double-ferrule system and CPI™ is a single-ferrule system, so ferrules and nuts are not interchangeable between them.
04What tube can be used with the 6MSC4N-316?
Parker lists seamless and welded-and-redrawn fully annealed 304, 316 and 316L stainless steel tube for stainless steel A-LOK® fittings. The tube outside diameter must be 3/8" and the wall must be within the pressure table.
05Can the 6MSC4N-316 be reassembled after removal?
Parker publishes assembly and remake instructions for the fitting in catalogue 4230/4233, so a joint can be taken apart and made again if the tube end is undamaged and the instructions are followed.