APC SRTG192XLBP Smart-UPS RT 192V 5Ah Battery Pack

What the SRTG192XLBP is for

The APC SRTG192XLBP is a battery product for APC UPS systems, specified at 192 V.

Chemistry: lead-acid battery. Each unit measures 8.7 cm x 44 cm x 62 cm (H x W x D) and weighs 39.4 kg.

Technical specifications

Compatibility and replacement notes

Battery voltage: 192 V.

Battery replacement should be matched to the exact UPS model named in the APC documentation, because voltage, connector and cartridge count differ between systems. Used batteries must be recycled according to local regulations.

Physical data and environment

Dimensions are 8.7 cm x 44 cm x 62 cm (H x W x D), and the unit weighs 39.4 kg. Colour: black.

Listed operating limits: operating temperature 0…40 °C; relative humidity 0…95 %; operating altitude 0…6600 ft.

The APC SRTG192XLBP is listed with type lead-acid battery, voltage 192 V. Replacement batteries should be fitted as a complete set of the same type and age, because mixing old and new cells shortens the life of the whole string. Fit and wire the cartridge exactly as shown in the installation sheet, and recycle used batteries according to local regulations.

The unit measures 8.7 cm x 44 cm x 62 cm (H x W x D) and weighs 39.4 kg, so check the available space and the handling requirements before delivery. It occupies 2U of rack space. Listed environmental limits: operating temperature 0…40 °C; relative humidity 0…95 %; altitude 0…6600 ft. Store and operate the battery within these limits, because heat shortens service life.

The SRTG192XLBP within the APC Smart-UPS RT range

Smart-UPS RT models are an earlier generation of APC double-conversion on-line UPS in rack/tower convertible housings with external battery pack support. Many are still in service in server rooms and control buildings, which is why like-for-like units, batteries and accessories for the RT range remain in demand.

An external battery pack adds runtime by connecting additional battery strings to the DC bus of a compatible UPS. The pack voltage and connector must match the UPS, and the UPS should be told how many packs are connected so that runtime estimates and charging stay correct. Packs are normally daisy-chained, so the total runtime can be built up step by step as the load or the outage risk of the site grows.

In the product data for the APC SRTG192XLBP, its battery technology is listed as lead-acid battery; the battery voltage is 192 V; it occupies 2U rack unit(s). These values are the starting point for matching it to the rest of the installation.

Site conditions in Oman and the GCC for the SRTG192XLBP

The listed operating temperature tops out at 40 °C. Summer shade temperatures in Muscat, Sohar and the interior regularly pass 45 °C, so the equipment belongs in an air-conditioned room or cabinet rather than an open plant area. Battery temperature has the biggest effect on service life: as a rule of thumb, the life of a valve-regulated lead-acid battery roughly halves for every 10 °C above 25 °C, so a room held at 20 to 25 °C pays back in fewer battery replacements. Coastal sites such as Muscat, Sohar and Duqm add humidity and salt to the air, and inland sites add fine dust, so keep the room sealed and clean and check filters and fans at every service visit. At 39.4 kg the unit needs two people or lifting equipment for installation, and rails rather than a shelf if it goes into a rack.

Service life and maintenance of the APC SRTG192XLBP

Reliability over the years depends mostly on the environment and on routine checks. Keep the room cool and dust-free, inspect fans, filters and connections during planned visits, and review the event log for warnings. On UPS and battery systems, measure runtime under the real load from time to time and replace batteries as a complete set before the runtime falls below what the site needs.

Seven Star LLC supplies APC equipment as an independent supplier based in Muscat. Original product documents are provided where available, and the part number SRTG192XLBP can be quoted together with related batteries, accessories and spares in one enquiry.

Storage, handling and delivery of the APC SRTG192XLBP

Sealed lead-acid batteries lose charge slowly while in storage, faster at high temperature, so batteries and units with internal batteries should be stored cool, dry and upright, and recharged within the interval the manufacturer gives if they are kept for several months before use. Check the packaging and the part number label on arrival, keep the documents supplied with the item, and record the installation date so that future service intervals and warranty questions can be answered quickly. Seven Star LLC arranges delivery to project sites, warehouses and offices across Oman, and shipment to other GCC countries on request.

Information to include when ordering the SRTG192XLBP

The following details help confirm compatibility before a quotation is issued:

• The exact UPS model the pack will be connected to
• How many packs are already connected and how many are needed
• The runtime target at the actual load
• Rack or tower installation and available rack units
• The delivery location in Oman (for example Muscat, Sohar, Duqm or Salalah) or elsewhere in the GCC, and the required date

Other APC UPS systems, batteries and accessories and Schneider Electric equipment can be combined in one quotation.

Documents and quotation

The user guide for the SRTG192XLBP is hosted on this page under Documents so the wiring, installation and operating details can be reviewed before ordering.

To order, submit the part number SRTG192XLBP, the quantity and the delivery location. Related items are grouped under UPS and Batteries. Seven Star LLC is an independent supplier based in Muscat and answers with availability and a quotation.