OBO 6064353 SKSU 60 FT Unperforated Cable Tray 200 mm 3000 mm

6064353 is the OBO Bettermann SKSU 60 FT cable tray, type SKSU 620 FT: a heavy-duty, unperforated tray with a 60 mm side height, 200 mm width, 3,000 mm length and 1.5 mm hot-dip galvanised steel (DIN EN ISO 1461). Connector perforations on both sides take straight connectors that are ordered separately.

A solid-base tray for cables that need a closed floor

The SKS 60 system is described by OBO as a heavy-duty cable tray with 60 mm side height. The SKSU version has no base perforation, which gives a closed floor that holds small debris, protects cables from drips falling through and suits runs where cables should not be exposed from beneath. It has connector holes on both sides, but no side perforation for accessories.

Hot-dip galvanising (DIN EN ISO 1461) gives a thicker zinc layer than strip galvanising and is the standard choice for areas with more humidity or outdoor exposure, though the datasheet does not publish coating thickness for this item.

Key features as printed in the datasheet

• Unperforated, 60 mm side height; connector perforations both sides.
• 1.5 mm plate, hot-dip galvanised steel (DIN EN ISO 1461).
• Straight connectors to be ordered separately in the right quantity.
• Magnetic shield insulation 20 dB without cover, 50 dB with cover.
• Load test type according to IEC 61537: Type II; 2.6 kN/m at 1.5 m support spacing.
• Insertable support spacing 1.5 – 3 m.

Technical specification

Master data and dimensions

Technical data

Load capacity (permitted load, without man load)

Selection and ordering guide

Choose SKSU when you want the closed floor and 1.5 mm material; choose the perforated SKS or EKS if you need ventilation and cable ties through the base. Because connectors are not supplied, order the matching straight connector and fixing parts at the same time (OBO states they are ordered separately).

Compared with 6047638 (0.75 mm RKS-Magic), this tray carries about double the load at 1.5 m spacing (2.6 versus 1.0 kN/m).

Installation and operation notes

Bolt adjacent lengths with the straight connectors and add bonding as your earthing design requires; unlike RKS-Magic, the datasheet does not claim built-in bonding for this item.

Keep supports within 1.5 – 3 m; permitted load drops to 0.55 kN/m at 3 m.

Derived figures: one 3 m length of this tray weighs about 12.8 kg (427.34 kg per 100 m x 3 m) and offers 118 cm2 of usable cross-section, so the cable fill and the cable weight per metre should be calculated together; at 1.5 m support spacing the permitted load of 2.6 kN/m is about 265 kg per metre (derived by dividing by 9.81), which is a general conversion and not an OBO statement.

Applications in Oman and the GCC

Heavy power and control cable routes in substations, plant rooms, tunnels, car parks and industrial buildings, and runs under floor slabs where cable protection from falling debris is useful.

In coastal Gulf locations and humid plant areas hot-dip galvanised steel is the usual specification, but verify the corrosivity class for your site against OBO guidance.

Site planning tip: quantities are ordered in whole lengths of 3 metres (smallest sales unit 3), and the datasheet lists a CO2 footprint of 8.9715 kg CO2e per metre for reporting. Bends, tees, reducers and covers are separate OBO items; confirm they match the 60 mm side height and 200 mm width before you finalise a bill of quantities.

Installation and selection notes

Because SKSU 60 FT has a closed floor, cables cannot be tied down through base holes and heat cannot escape downward, so allow for derating when many power cables are bundled. Use straight connectors ordered separately, as the data sheet requires, and cut the tray with suitable tools, treating cut edges with zinc-rich paint to restore protection. The 1.5 mm hot-dip galvanised plate suits damp areas and outdoor runs under cover; confirm the coating class required by the project before ordering.

Information needed for a quotation

Send the code, the quantity, the delivery location in Oman or the GCC and any accessories such as connectors, covers, bends or fixings, so that the complete package can be quoted together.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification before a purchase is confirmed. Ratings, dimensions and loads are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Compatible accessories and related items

Related OBO items: RKS-Magic 6047638, EKS 6056326, LG 110 ladder 6216477, mesh tray 6002417 and wide-span WKSG 6098566; cable glands 2022902 and 2022128; surge arresters 5095314 and 5094931.

Frequently asked questions

What are the dimensions of 6064353?

60 mm high, 200 mm wide, 3,000 mm long, plate thickness 1.5 mm.

Is it perforated?

No. It is unperforated with connector holes on both sides.

Are connectors included?

No. The datasheet says straight connectors should be ordered separately.

What is the load at 2 m spacing?

1.9 kN/m according to the datasheet table.

Does Seven Star LLC act as an OBO Bettermann distributor?

No, we are an independent supplier in Muscat and supply OBO Bettermann items on request rather than acting as a OBO Bettermann channel partner.

Documents and quotation

Download the official OBO Bettermann technical data sheet for 6064353 from this page. As an independent supplier based in Muscat, Seven Star LLC supplies OBO Bettermann items on request: use the quote form with the quantity you need. Check every value in the document against your own specification before you order. Browse similar items in the category.