Brand:

Pedrollo 3SR 3-Inch Submersible Borehole Pump

Description

Pedrollo 3SR pump explained

The Pedrollo 3SR is a 3-inch submersible borehole pump for clean water, rated up to 120 l/min (7.2 m³/h) and up to 267 m of head, with a maximum operating depth of 70 m. Seven Star LLC supplies the 3SR in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

3SR 1, 2, 4 and 5 are flow classes, and the number after the slash is the stage count. 3SR 1/15 is 0.25 kW at 64.5 m, 1/31 is 0.55 kW at 133 m and 1/62 is 1.1 kW at 267 m.

3SR technical specifications

Parameter Specification
Manufacturer / part number Pedrollo / 3SR
Flow rate up to 120 l/min (7.2 m³/h)
Head up to 267 m
Liquid temperature up to +40 °C
Maximum sand content 150 g/m³
Maximum operating depth below water level 70 m
Motor 2 poles
Ingress protection rating IP 68
Delivery port Stainless steel AISI 304
Pump sleeve Stainless steel AISI 304
Impellers – Derlin for 3SR 1-2-4 – Noryl™ for 3SR 5
Diffusers Noryl™
Shaft Stainless steel AISI 304
Motor bracket Precision casted stainless steel AISI 304

The values above come from the manufacturer technical data for the series. Individual models inside the 3SR range differ in power, head and current, so always confirm the exact model code before ordering.

How the 3SR works and what limits it

Delivery port and pump sleeve are AISI 304, impellers are Derlin (3SR 1-2-4) or Noryl (3SR 5), diffusers are Noryl, the motor bracket is cast AISI 304. Sand content up to 150 g/m³, IP 68.

A borehole pump is a long, slim assembly in which a multistage hydraulic end sits below a submersible motor, and the whole unit hangs in the well on the rising main. Water enters through the suction strainer, passes through the stages in series and leaves through the delivery port at the top. Because the diameter is limited by the well casing, the head is built by adding stages, which is why the models are identified by a flow class and a stage number. The sand content in the water and the depth of submergence are the two limits that matter most for service life.

The 3SR is the smallest borehole pump in this group and fits wells with a casing of about 3 inches. Its flow range is low (up to 120 l/min), and the head range is wide, from 44 m for the 3SR 2/11 up to 267 m for the 3SR 1/62. That wide range comes from stages: the first number is the flow class and the second is the stage count, so a 3SR 1/62 has far more stages than a 3SR 1/15 for the same flow class. Impellers are Derlin on the 3SR 1, 2 and 4 and Noryl on the 3SR 5, and the diffusers are Noryl.

For sizing, subtract the dynamic water level from the static level and include the friction loss in the rising main, then compare the total with the head table. The listed sand limit of 150 g/m³ is a maximum, not a target, and a pump that works in sandy water wears quicker than the rating suggests.

3SR models and performance data

Model Rated power P2 Head at first table point (50 Hz)
3SRm 1/15 0.25 kW / 0.33 HP 64.5 m
3SRm 1/31 0.55 kW / 0.75 HP 133 m
3SRm 1/62 1.1 kW / 1.5 HP 267 m
3SRm 2/11 0.25 kW / 0.33 HP 44 m
3SRm 2/15 0.37 kW / 0.50 HP 60 m

The heads in this table are read from the first point of the manufacturer 50 Hz performance table and fall as flow increases, so use the full curve for the real duty point. Where a 60 Hz version is needed, ask us: the manufacturer states that 60 Hz motors are available on request for many models.

Where the 3SR fits: related Pedrollo pumps

For larger bores: 4HR, 6HR; multistage: UP and NK.

Selecting a 3SR pump: checklist

  • Flow class and stages
  • Depth up to 70 m
  • Sand under 150 g/m³
  • Single-phase 3SRm or three-phase
  • Borehole diameter

Installing and maintaining the 3SR

Check the well diameter, depth, the dynamic water level and the sand content before choosing the pump. Fit a strainer or inlet screen as required, lower the pump on a rising main or rope with the cable clamped at intervals, and keep the pump below the dynamic water level with the margin given in the manual. Fit a non-return valve in the delivery line, a motor protection device and, if the well can run low, dry-run protection. Set the first start-up with the delivery valve partly closed and open it gradually until the flow stabilises and the water runs clear. Keep a logbook of current draw and flow so that wear or a falling water table can be detected early.

3SR applications in Oman and the GCC

Household use, irrigation and small community systems. In Oman wells with drawdown need dry-run protection.

Groundwater in Oman varies widely in salinity, temperature and sand content, and water tables may fall over a season. Ask for a recent analysis of the well, record the dynamic level after pumping for several hours, and choose a pump whose stated sand limit and depth rating suit that data. Corrosive or very saline water needs a material check before ordering.

Information to send with your 3SR RFQ

  • Well diameter, total depth, static and dynamic water levels
  • Required flow rate and total head at the surface, including pipe losses
  • Water quality: sand content, temperature and chemistry
  • Supply: voltage, frequency, phase and control or starter type
  • Rising-main material and size, cable length and quantity of pumps

Documents and quotation

The manufacturer datasheet for the 3SR is attached on this page, and the performance tables in it should be checked against your duty point. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.

Send the model code, quantity, voltage and frequency and the duty point, and we will confirm availability and prepare a quotation for Oman and the GCC.

Other Models in the Pedrollo Bore Range

Seven Star LLC supplies models from the Pedrollo Bore range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Pedrollo 3SR 3-Inch Submersible Borehole PumpCentrifugal PumpsYou are viewing this model
Pedrollo 4HR Stainless 4-Inch Borehole PumpCentrifugal PumpsView details
Pedrollo 6HR Stainless 6-Inch Borehole PumpCentrifugal PumpsView details
Pedrollo UP Multistage Submersible Pump 20 m DepthCentrifugal PumpsView details
Pedrollo NK Multistage Submersible Pump for TanksCentrifugal PumpsView details
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Pedrollo is an Italian manufacturer of electric pumps, founded in 1974 by Silvano Pedrollo and headquartered in San Bonifacio, near Verona, where its plant covers more than 150,000 square metres. The company exports to over 160 countries through ten commercial branches, starting with Pedrollo France in 1987. Its pumps are used for domestic water supply, irrigation, boreholes, pressure boosting and drainage.

Seven Star LLC is an independent supplier in Muscat. We list Pedrollo pumps for homes, farms and contractors in Oman and the GCC.

Pedrollo company profile

Founded 1974, by Silvano Pedrollo
Headquarters San Bonifacio, Verona, Italy
Ownership Pedrollo family
Reach Exports to over 160 countries through ten commercial branches
Product families PKm peripheral pumps, CP and F centrifugal pumps, JSWm self-priming jet pumps, 4SR and 6SR submersible borehole pumps, TOP and VXm drainage pumps, HF high-flow pumps, pressure booster sets

Milestones

  • 1974: Silvano Pedrollo founds the company.
  • 1987: Pedrollo France, the first foreign branch, opens.
  • 2009: Pedrollo acquires a majority stake in Saci Pumps.

Pedrollo product series

Surface pumps include the CP close-coupled centrifugal pump from 0.25 to 2.2 kW, the 2CP twin-impeller pump from 1.1 to 11 kW, the F EN 733 close-coupled pump, the NGA open-impeller pump for dirty water and the HT vertical multistage pump.

Submersible pumps include the 4SR and 6SR borehole pumps for 4 and 6 inch wells and the VX vortex sewage pump.

Close-coupled centrifugal pumps suit clean water transfer and boosting, twin-impeller 2CP pumps give higher head at moderate flow, and the open-impeller NGA handles water with some solids. Submersible 4SR and 6SR pumps are matched to the well diameter, flow and depth, and the VX vortex pump passes solids in sewage and drainage.

Where Pedrollo pumps are used

Water supply and pressure boosting, irrigation, wells, tank transfer, and drainage and sewage.

Pedrollo products we list

Family Examples
Pumps 2CP Twin-Impeller Centrifugal Pump 1.1-1…, 4SR 4-Inch Submersible Borehole Pump, 6SR 6-Inch Submersible Borehole Pump, CP Close-Coupled Centrifugal Pump 0.25-2…, F EN 733 Close-Coupled Centrifugal Pump, HT Vertical Multistage Centrifugal Pump, NGA Open-Impeller Centrifugal Pump for D…

Ordering Pedrollo pumps: what we need

Send the model or the flow, head and liquid, the power supply and the well diameter or installation type.

Facts checked against Pedrollo's own history page (pedrollo.com), October 2026.

FAQ

Questions about the Pedrollo 3SR 3-Inch Submersible Borehole Pump

Answers from our engineering team on installation, compatibility and integration.

01What is the maximum depth for the 3SR?
The maximum operating depth is 70 m below the water level, according to the manufacturer data.
02What sand content can the 3SR handle?
The stated maximum sand content is 150 g/m³, so very sandy wells need a filter or a different pump.
03Can the 3SR run dry?
No. The pump should stay below the dynamic water level, and dry-run protection is advised for wells that may be drawn down.
04What should I check before ordering the 3SR?
Well diameter, depth, dynamic level, sand content and the duty point at the surface.
05Does the 3SR need a non-return valve?
A non-return valve in the delivery line prevents back-flow and water hammer when the pump stops.