Brand:

Servomex S2500965B Processor PCB with Firmware for 2500/2520/2550

Description

Servomex S2500965B Processor PCB with Firmware for 2500/2520/2550: overview

Servomex S2500965B is the processor PCB with firmware for 2500, 2520 and 2550 analysers, listed in the general spares table of the 2500 series manual. The 2500 series is a single beam, multi wavelength process analyser that can monitor up to three components in a gas sample stream in the 2550 version. It is supplied configured for a stated analysis in a specific background stream, with 2500, 2510 (gas filter correlation), 2520 (soft UV) and 2550 variants, and safe-area or hazardous-area certified versions marked GEN, EU1, EU2, DU1, EX1, EX2, DX1, FM2, DM2 and HTV. The part is catalogued for the SERVOTOUGH SpectraExact 2500 series analyser, and this page describes Servomex S2500965B so that maintenance teams, procurement staff and planners can confirm they are asking for the right item before they raise a request.

The analyser is controlled by an on-board microprocessor, which gives the flexibility to configure the instrument for the process. This listing is the processor board supplied with its firmware for the 2500, 2520 and 2550 models. The 2510 gas filter correlation model has its own processor PCB with firmware under a different number, S2510965B, so the model must be confirmed before ordering.

Seven Star LLC offers S2500965B as an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Quote S2500965B exactly as written, because spare part numbers in this analyser family are similar in form and a single wrong character points to a different item.

Key features of S2500965B

  • Exact part number S2500965B, taken from the manufacturer’s own spares documentation for the SpectraExact 2500.
  • Described in the source document as processor PCB with firmware for 2500, 2520 and 2550 analysers, listed in the general spares table of the 2500 series manual.
  • Intended for the SERVOTOUGH SpectraExact 2500 series analyser; the document links the part to the analyser model rather than to a generic category.
  • The manual lists the microprocessor PCB in its recommended spares table as 0 units for 1 to 3 analysers and 1 unit for 4 to 9 analysers, marked as application dependent.
  • Useful for planned maintenance and for fast recovery when a fault such as a processor that does not start, or repeated serious fault displays that are not cleared by a power cycle has been traced to this item.
  • Supplied on a request-for-quotation basis with the part number, quantity and analyser serial number confirmed.

Technical specifications for S2500965B

Parameter Value
Manufacturer Servomex
Part number S2500965B
Description Processor PCB with Firmware for 2500/2520/2550
Item Processor PCB with firmware
Applies to 2500, 2520 and 2550 only
2510 equivalent S2510965B
Table in manual 6.1 General Spares List
Host analyser SERVOTOUGH SpectraExact 2500 series (2500, 2510, 2520, 2550)
Operating temperature 0 to 55 degrees C, 0 to 95 percent RH non-condensing
Supply 115/230 V AC or 100/200 V AC, plus or minus 15 percent
Sample pressure 0 to 10 bar gauge
Sample temperature 0 to 180 degrees C
Analyser ingress protection IP65 without electrical cell heater

The values above are taken from the manufacturer’s documents for the SpectraExact 2500. Figures in the host analyser rows describe the complete instrument, not the individual part S2500965B, and are given so that you can check that the analyser in your plant belongs to the same family.

Typical applications in oil, gas, utilities, water and manufacturing

Gas analysers of this type are specified where a process stream must be measured continuously by infrared or ultraviolet absorption, for example in gas processing, petrochemical, refining, power generation and industrial gas applications. In Oman and the wider GCC region many such analysers have been in service for years, so buyers often search by exact spare part number when a unit needs repair.

In oil and gas, power, utilities, water treatment and general manufacturing plants in Oman and the GCC, an analyser that is out of service can leave a process without its measurement, so maintenance planners keep a list of exact spare part numbers. Part S2500965B belongs on that list for sites that run the SpectraExact 2500. Having the part number, the analyser serial number and the fault history ready shortens the time between a diagnosis and an order.

Spare part searches are rarely casual. A maintenance planner usually holds a fault report, an analyser serial number and a part number copied from a manual or from a removed component. Matching those three pieces of information against the manufacturer’s documentation avoids the cost of ordering the wrong item and the downtime that follows. Where an analyser family has been in service for many years, the printed numbers in older manuals remain the dependable way to identify an item, which is why this page repeats the exact designation and the table in which the manufacturer lists it. Whenever a description in a stores system differs from the manufacturer’s wording, trust the part number and confirm the rest by asking.

Selection and compatibility notes for S2500965B

The manual states that the model and serial number of the 2500 must be given when ordering spares, and that for the certified versions (EU1, EU2, DU1, EX1, EX2, DX1, FM2 and DM2) only the boards listed in its spares tables may be used as spares. Many source, detector, window and scrubber items depend on the analyser’s Final Specification Sheet.

The 2500 series documentation sits in Servomex’s obsolete products section for the 02500D version, while the SpectraExact 2500F is listed as a current product. Check the analyser’s identification label before ordering, because spares differ between versions.

Before you order S2500965B, run through this checklist:

  • Read the identification label of the analyser and note the model and the serial number.
  • Confirm that the description Processor PCB with Firmware for 2500/2520/2550 matches the item you removed or the item the fault points to.
  • Check the related part numbers in the same documentation, because a neighbouring item may be the real need.
  • Tell us the quantity and any delivery point in Oman or elsewhere in the GCC when you send the request for S2500965B.

Installation and commissioning of S2500965B

Servicing of the analyser should be carried out by suitably qualified personnel using the manufacturer’s service documentation. Before work on S2500965B, isolate the analyser from its supply, release any sample pressure, make the area safe for the sample gas in use and follow the warnings in the manual. Handle the part with care, keep any contact surfaces clean and compare the replacement with the removed item before it is fitted.

After S2500965B has been fitted, close the enclosure correctly, restore power and the sample flow, allow the analyser to stabilise, and then check the calibration and the alarm and output functions against the plant procedure. A typical reason to fit this part is a processor that does not start, or repeated serious fault displays that are not cleared by a power cycle.

Maintenance and spares planning for S2500965B

The manual lists the microprocessor PCB in its recommended spares table as 0 units for 1 to 3 analysers and 1 unit for 4 to 9 analysers, marked as application dependent. Plants that run several analysers usually hold stock by fleet size, and a record of when S2500965B was last changed makes the next change easier to plan. Keep the removed item with a note of the date and the fault description, because that history helps when later faults appear.

Related Servomex spares and ordering notes

Other 2500 series spares in the same manual include the power supply S2000925, the display and keypad assembly S2501999, the sensor interface PCB 02000934, the chopper motor S2500986, the fuse kit 02501996, the cell servicing kit S2500981 and the cell seals kits S2500982A and S2500982B. If you are not sure whether S2500965B is the right item, send the analyser model and serial number and the symptom, and we will compare them with the manufacturer’s lists before quoting.

S2500965B frequently asked questions

The questions below cover the points buyers raise most often about S2500965B: what the item is, which analyser it fits, what to send with an order, what the manufacturer says about its status, and how Seven Star LLC supplies it in Oman and the GCC.

Documents and quotation

The manufacturer’s document that lists S2500965B is available as a datasheet download on this page, and it also shows the parts that sit around it in the analyser. To receive a quotation, send us the RFQ with the part number S2500965B, the quantity, the analyser model and serial number, and the delivery location. Seven Star LLC replies with availability and lead time for Oman and the GCC.

Other Models in the Servomex 25 Range

Seven Star LLC supplies models from the Servomex 25 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Servomex S2500986 Chopper Motor for SpectraExact 2500Gas Analyzer SystemsView details
Servomex S2000925 Power Supply for SpectraExact 2500Gas Analyzer SystemsView details
Servomex S2501999 Display/Keypad Assembly for SpectraExact 2500Gas Analyzer SystemsView details
Servomex 02000934 Sensor Interface PCB for SpectraExact 2500Gas Analyzer SystemsView details
Servomex S2500904A Transmitter PCB for SpectraExact 2500Gas Analyzer SystemsView details
Servomex S2510965B Processor PCB with Firmware for 2510 GFCGas Analyzer SystemsView details
Servomex 02501996 Fuse Kit for SpectraExact 2500Gas Analyzer SystemsView details
Servomex S2500981 Cell Servicing Kit for SpectraExact 2500Gas Analyzer SystemsView details
Datasheets & Documents
  • PDF Datasheet Servomex S2500965B Processor PCB with Firmware for 2500/2520/2550 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Servomex is a British specialist in gas analysis, founded in 1952 by Richard Steel, John Crockett and Ronald Mudie; the name comes from servomechanism. It first made electronic products, then built its first paramagnetic oxygen analyser in 1961 after work with Charles Munday on a paramagnetic sensor. Servomex is based in Crowborough, East Sussex, and is part of Spectris.

Seven Star LLC lists Servomex process, combustion, emissions and portable gas analyzers, plus accessories, and sources them for refineries, petrochemical plants and industrial gas producers in Oman.

SERVOMEX company profile

Founded 1952, United Kingdom
Founders Richard Steel, John Crockett and Ronald Mudie
Headquarters Jarvis Brook, Crowborough, East Sussex
Ownership Spectris plc, since 1999
Key technologies Paramagnetic oxygen sensing (1961), infrared analysis (1969), zirconia oxygen sensors (1981)
Product families MultiExact and SERVOPRO MultiExact analysers, SERVOTOUGH OxyExact and Oxy 1800 oxygen analysers, SERVOTOUGH Laser 3 Plus TDL analysers, SERVOFLEX portable analysers, zirconia combustion analysers

Milestones

  • 1952: Servomex is founded.
  • 1961: The first Servomex paramagnetic oxygen analyser is introduced.
  • 1981: Servomex introduces zirconia oxygen sensors.
  • 1999: Spectris acquires Servomex.

Servomex analyzer families listed

Servomex groups its analyzers under family names that indicate where they can be used. SERVOTOUGH covers analyzers built for hazardous areas and field mounting, SERVOPRO covers units for general purpose areas and analyzer houses, and SERVOFLEX is the portable line. On this page:

  • SERVOTOUGH OxyExact 2200: paramagnetic oxygen analyzer for process control and safety
  • SERVOTOUGH SpectraExact 2500: photometric analyzer for process gas components
  • SERVOTOUGH Laser 3 Plus: compact tunable diode laser analyzer for combustion
  • SERVOPRO 4900 Multigas: multi-component analyzer for emissions monitoring
  • SERVOPRO NanoTrace DF-550E: ultra-trace oxygen analyzer for high purity gases
  • SERVOFLEX Micro i.s. 5100: intrinsically safe portable oxygen analyzer

A flow alarm relay box for the 2700 flue gas analyzer is also listed.

Where Servomex gas analyzers are used

Typical duties are oxygen measurement for inerting and blanketing, vapor recovery and flare header safety, combustion control on fired heaters and reformers, purity control in air separation and electronic gases, and continuous emissions monitoring. In the GCC the main users are refining, petrochemicals, fertilizer, LNG and industrial gas plants.

SERVOMEX products we list

Family Examples
Gas Analyzer Systems SERVOPRO 4900 Multigas Analyzer, SERVOPRO NanoTrace DF-550E Ultra-Trace O…, SERVOTOUGH Laser 3 Plus Combustion TDL G…, SERVOTOUGH OxyExact 2200 Oxygen Analyzer, ServoTough SpectraExact 2500 Gas Analyzer
Portable Test & Measurement Micro i.s. 5100 Portable Oxygen Analyzer
Gas Analyzer Accessories Tough Flue Gas 2700 Flow Alarm Relay Box

Ordering Servomex analyzers and spares: what we need

A Servomex gas analyzer is built to an order code that fixes the measured gas, range, sample wetted materials, outputs and hazardous area approval. For replacements and spare parts, send the model, the serial number and the order code from the data plate. For a new Servomex oxygen analyzer or multigas unit, send the full stream composition, the component and range to be measured, sample pressure and temperature, the area classification, power supply and communication needs. We check the configuration against Servomex documentation before quoting.

Facts checked against Servomex's own 70-year history and company profiles, October 2026.

FAQ

Questions about the Servomex S2500965B Processor PCB with Firmware for

Answers from our engineering team on installation, compatibility and integration.

01What is Servomex S2500965B?
Servomex S2500965B is the processor PCB with firmware for 2500, 2520 and 2550 analysers, listed in the general spares table of the 2500 series manual. It is catalogued for the SERVOTOUGH SpectraExact 2500 series analyser and quoted by exact part number.
02Which analyser does S2500965B fit?
The manufacturer's documents link S2500965B to the SERVOTOUGH SpectraExact 2500 series analyser. Confirm the model and serial number on the identification label before ordering.
03What should I send when I request S2500965B?
Send the part number S2500965B, the quantity, the analyser model and serial number, and the delivery location in Oman or the GCC, so the quotation is accurate.
04Is S2500965B current or obsolete?
The 2500 series documentation sits in Servomex's obsolete products section for the 02500D version, while the SpectraExact 2500F is listed as a current product. Check the analyser's identification label before ordering, because spares differ between versions. Availability of S2500965B is confirmed on request, because stock changes without notice.
05Does Seven Star LLC supply S2500965B in Oman?
Yes, Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ and we confirm availability for S2500965B.