- Automation & ControlView all 2,607 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Pedrollo
Pedrollo NK Multistage Submersible Pump for Tanks
Description
Pedrollo NK pump explained
The Pedrollo NK is a multi-stage submersible pump for clean water, rated up to 160 l/min (9.6 m³/h), up to 97 m of head and 20 m of depth. Seven Star LLC supplies the NK in Oman and the GCC as an independent supplier in Muscat.
NK 2, 4 and 8 are flow classes, the number after the slash is the stage count, and NKm is the single-phase version with a GE suffix in the datasheet. NK 2/3 is 0.55 kW at 48.5 m.
NK technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Pedrollo / NK |
| Flow rate | up to 160 l/min (9.6 m³/h) |
| Head up | up to 97 m |
| Liquid temperature | up to +40 °C |
| Maximum sand content | 150 g/m³ |
| Maximum operating depth below water level | up to 20 m (with an appropriately sized power cable) |
| Motor | 2 poles |
| Ingress protection rating | IP 68 |
| Delivery port | Stainless steel AISI 304 |
| Pump sleeve | Stainless steel AISI 304 |
| Impellers | Noryl™ |
| Diffusers | Noryl™ |
| Shaft | Stainless steel AISI 431 |
The values above come from the manufacturer technical data for the series. Individual models inside the NK range differ in power, head and current, so always confirm the exact model code before ordering.
How the NK works and what limits it
AISI 304 delivery port and sleeve, Noryl stages, AISI 431 shaft, sand 150 g/m³.
A borehole pump is a long, slim assembly in which a multistage hydraulic end sits below a submersible motor, and the whole unit hangs in the well on the rising main. Water enters through the suction strainer, passes through the stages in series and leaves through the delivery port at the top. Because the diameter is limited by the well casing, the head is built by adding stages, which is why the models are identified by a flow class and a stage number. The sand content in the water and the depth of submergence are the two limits that matter most for service life.
The NK is a close relative of the UP in the same family of multi-stage submersible pumps, with a slightly lower maximum flow (160 against 180 l/min) and the same 97 m maximum head. It is aimed at tanks and reservoirs and garden irrigation, and the depth rating of 20 m with a suitable cable means it is for shallow installations. Models run from NK 2/2 at 0.37 kW (33 m) to NK 8/3 at 1.1 kW (40.5 m), with NK 4 in between.
Flow classes 2, 4 and 8 give increasing flow at a given head, so choose the class from the flow and the stage count from the head. The table includes more flow points than the UP, which helps when the duty is at the right of the curve.
NK models and performance data
| Model | Rated power P2 | Head at first table point (50 Hz) |
|---|---|---|
| NKm 2/2 GE | 0.37 kW / 0.5 HP | 33 m |
| NK 2/3 | 0.55 kW / 0.75 HP | 48.5 m |
| NK 2/6 | 1.5 kW / 2 HP | 97 m |
| NK 4/6 | 1.5 kW / 2 HP | 80 m |
The heads in this table are read from the first point of the manufacturer 50 Hz performance table and fall as flow increases, so use the full curve for the real duty point. Where a 60 Hz version is needed, ask us: the manufacturer states that 60 Hz motors are available on request for many models.
Where the NK fits: related Pedrollo pumps
UP.
Selecting a NK pump: checklist
- Class
- Stages
- Phase
- Depth
- Water
Installing and maintaining the NK
Check the well diameter, depth, the dynamic water level and the sand content before choosing the pump. Fit a strainer or inlet screen as required, lower the pump on a rising main or rope with the cable clamped at intervals, and keep the pump below the dynamic water level with the margin given in the manual. Fit a non-return valve in the delivery line, a motor protection device and, if the well can run low, dry-run protection. Set the first start-up with the delivery valve partly closed and open it gradually until the flow stabilises and the water runs clear. Keep a logbook of current draw and flow so that wear or a falling water table can be detected early.
NK applications in Oman and the GCC
Tank and reservoir supply, garden irrigation.
Groundwater in Oman varies widely in salinity, temperature and sand content, and water tables may fall over a season. Ask for a recent analysis of the well, record the dynamic level after pumping for several hours, and choose a pump whose stated sand limit and depth rating suit that data. Corrosive or very saline water needs a material check before ordering.
Information to send with your NK RFQ
- Well diameter, total depth, static and dynamic water levels
- Required flow rate and total head at the surface, including pipe losses
- Water quality: sand content, temperature and chemistry
- Supply: voltage, frequency, phase and control or starter type
- Rising-main material and size, cable length and quantity of pumps
Storage, handling and spares for the Pedrollo NK
Store the Pedrollo NK in a dry, covered place and keep it in its packaging until installation. If the pump is stored for a long time, turn the shaft by hand from time to time where the design allows it, so that seals do not stick. In Oman and the GCC, protect the motor and cable from direct sun and sand before installation.
- Check the pump nameplate against the duty point and the power supply before installation.
- Flush the pipework before connecting the pump, so that welding debris or sand does not enter the hydraulic parts.
- Never run the pump dry; fit level control or dry-running protection where the application needs it.
- Keep a spare mechanical seal kit and, for submersible models, a spare cable joint kit for planned maintenance.
When you send an RFQ for the Pedrollo NK, state the flow, head, liquid and power supply. With this information the right model and any spare parts can be confirmed together.
Documents and quotation
The manufacturer datasheet for the NK is attached on this page, and the performance tables in it should be checked against your duty point. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.
Send the model code, quantity, voltage and frequency and the duty point, and we will confirm availability and prepare a quotation for Oman and the GCC.
Other Models in the Pedrollo Bore Range
Seven Star LLC supplies models from the Pedrollo Bore range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Pedrollo 3SR 3-Inch Submersible Borehole Pump | Centrifugal Pumps | View details |
| Pedrollo 4HR Stainless 4-Inch Borehole Pump | Centrifugal Pumps | View details |
| Pedrollo 6HR Stainless 6-Inch Borehole Pump | Centrifugal Pumps | View details |
| Pedrollo UP Multistage Submersible Pump 20 m Depth | Centrifugal Pumps | View details |
| Pedrollo NK Multistage Submersible Pump for Tanks | Centrifugal Pumps | You are viewing this model |
Datasheets & Documents
- Datasheet Pedrollo NK Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Pedrollo is an Italian manufacturer of electric pumps, founded in 1974 by Silvano Pedrollo and headquartered in San Bonifacio, near Verona, where its plant covers more than 150,000 square metres. The company exports to over 160 countries through ten commercial branches, starting with Pedrollo France in 1987. Its pumps are used for domestic water supply, irrigation, boreholes, pressure boosting and drainage.
Seven Star LLC is an independent supplier in Muscat. We list Pedrollo pumps for homes, farms and contractors in Oman and the GCC.
Pedrollo company profile
| Founded | 1974, by Silvano Pedrollo |
|---|---|
| Headquarters | San Bonifacio, Verona, Italy |
| Ownership | Pedrollo family |
| Reach | Exports to over 160 countries through ten commercial branches |
| Product families | PKm peripheral pumps, CP and F centrifugal pumps, JSWm self-priming jet pumps, 4SR and 6SR submersible borehole pumps, TOP and VXm drainage pumps, HF high-flow pumps, pressure booster sets |
Milestones
- 1974: Silvano Pedrollo founds the company.
- 1987: Pedrollo France, the first foreign branch, opens.
- 2009: Pedrollo acquires a majority stake in Saci Pumps.
Pedrollo product series
Surface pumps include the CP close-coupled centrifugal pump from 0.25 to 2.2 kW, the 2CP twin-impeller pump from 1.1 to 11 kW, the F EN 733 close-coupled pump, the NGA open-impeller pump for dirty water and the HT vertical multistage pump.
Submersible pumps include the 4SR and 6SR borehole pumps for 4 and 6 inch wells and the VX vortex sewage pump.
Close-coupled centrifugal pumps suit clean water transfer and boosting, twin-impeller 2CP pumps give higher head at moderate flow, and the open-impeller NGA handles water with some solids. Submersible 4SR and 6SR pumps are matched to the well diameter, flow and depth, and the VX vortex pump passes solids in sewage and drainage.
Where Pedrollo pumps are used
Water supply and pressure boosting, irrigation, wells, tank transfer, and drainage and sewage.
Pedrollo products we list
Ordering Pedrollo pumps: what we need
Send the model or the flow, head and liquid, the power supply and the well diameter or installation type.
Facts checked against Pedrollo's own history page (pedrollo.com), October 2026.
Browse Pedrollo products by category: Pumps.
FAQ
Questions about the Pedrollo NK Multistage Submersible Pump for Tanks
Answers from our engineering team on installation, compatibility and integration.
01Where is the NK normally used?
Pedrollo describes it for clean water in domestic, agricultural and civil settings, such as tank and reservoir supply and garden irrigation.
02What is the maximum head of the NK?
The NK reaches up to 97 m of head and up to 160 l/min, depending on the model and stage count.
03Can the NK run dry?
No. The pump should stay below the dynamic water level, and dry-run protection is advised for wells that may be drawn down.
04What should I check before ordering the NK?
Well diameter, depth, dynamic level, sand content and the duty point at the surface.
05Does the NK need a non-return valve?
A non-return valve in the delivery line prevents back-flow and water hammer when the pump stops.


















Reviews
There are no reviews yet.