Brand:

Pedrollo ZXm 2 Vortex Submersible Sewage Pump

Description

Pedrollo ZXm 2 pump explained

The Pedrollo ZXm 2 is a submersible vortex-impeller pump for domestic and civil sewage drainage, rated up to 400 l/min (24 m³/h) and up to 13 m of head, with 0.55 kW single-phase motor. It handles solids up to 30 mm (ZXm 2/30) or 40 mm (ZXm 2/40). Seven Star LLC supplies the ZXm 2 in Oman and the GCC as an independent supplier in Muscat.

The two versions are ZXm 2/30 and ZXm 2/40, where the number after the slash is the passage in mm. The 2/30 gives 13 m and the 2/40 gives 11.5 m at the first table point. The m marks single-phase.

ZXm 2 technical specifications

Parameter Specification
Manufacturer / part number Pedrollo / ZXm 2
Flow rate up to 400 l/min (24 m³/h)
Head up up to 13 m
Liquid temperature up to +40° C
Capable of processing suspended solids – up to Ø 30 mm for ZXm 2/30 – up to Ø 40 mm for ZXm 2/40
Maximum operating depth below water level up to 5m (with an appropriately sized power cable)
Minimum immersion for continuous service – 265 mm for ZXm 2/30 – 275 mm for ZXm 2/40
Motor 2 poles
Ingress protection rating IP 68
Pump housing Fibreglass-filled technopolymer
Impeller Fibreglass-filled technopolymer
Motor sleeve Stainless steel AISI 304
Shaft Stainless steel AISI 431

The values above come from the manufacturer technical data for the series. Individual models inside the ZXm 2 range differ in power, head and current, so always confirm the exact model code before ordering.

How the ZXm 2 works and what limits it

Housing and impeller are fibreglass-filled technopolymer, with a 5-year warranty stated by the manufacturer on the pump body. Minimum immersion for continuous service is 265 mm (2/30) and 275 mm (2/40), maximum depth 5 m, liquid up to +40 °C.

A submersible drainage pump has its motor and hydraulic end in one sealed unit that sits in the liquid itself. The surrounding liquid helps cool the motor, a double shaft seal separates the water from the windings, and the impeller moves the liquid up the delivery hose or pipe without any priming. The shape of the impeller sets what the pump can pass: a vortex or channel design leaves a free path for solids, whereas a closed multi-vane impeller gives more head on clean water. The data sheet therefore states both the maximum solid size and the draining capability, meaning the lowest level at which the pump still moves water.

The ZXm 2 uses a fibreglass-filled technopolymer for the pump body, base and impeller, and the manufacturer gives a 5-year warranty on the pump body. Check the warranty terms with us for your order. Draining capability and minimum immersion differ between the 2/30 and 2/40 (265 and 275 mm), so the sump must be deep enough for continuous service. Delivery uses an ISO 228/1 threaded port, so plan the delivery pipe fittings and a non-return valve accordingly.

The single-phase 0.55 kW motor makes the pump easy to power from a villa distribution board, but cable length and size need to suit the 5 m depth limit.

ZXm 2 models and performance data

Model Rated power P2 Head at first table point (50 Hz)
ZXm 2/30 0.55 kW / 0.75 HP 13 m
ZXm 2/40 0.55 kW / 0.75 HP 11.5 m

The heads in this table are read from the first point of the manufacturer 50 Hz performance table and fall as flow increases, so use the full curve for the real duty point. Where a 60 Hz version is needed, ask us: the manufacturer states that 60 Hz motors are available on request for many models.

Where the ZXm 2 fits: related Pedrollo pumps

Heavier duty: BC. Smaller solids: TEX, TOP-VORTEX.

Selecting a ZXm 2 pump: checklist

  • Choose 2/30 or 2/40
  • Check immersion depth
  • Single-phase
  • Delivery port size
  • Check cable length

Installing and maintaining the ZXm 2

Place the pump on a firm base inside the sump, not directly on silt, so the inlet is not blocked. Connect a delivery pipe or hose of at least the port size, and add a non-return valve when the head is significant or when several pumps share one line. Use the float switch type recommended for the model and make sure the float swings freely and cannot catch the pipe or the cable. Never carry or lift the pump by the electric cable, keep the cable end above any possible water level, and respect the maximum immersion depth. Rinse the pump after dirty duty, clean the inlet area from time to time, and inspect the cable, float and seal before the flood season or before heavy use.

ZXm 2 applications in Oman and the GCC

Domestic sewage pits, septic transfer and civil drainage. The vortex impeller does not clog easily; in GCC villas this is a typical sump pump.

Drainage pumps in Oman see two quite different duties: steady daily sump emptying, and rare but severe flood events after heavy rain in the wadis. For the second case a spare pump kept dry and tested beforehand matters more than anything else. Keep the electrical connection above the flood level, protect the supply with an earth-leakage device and keep sand away from the inlet.

Information to send with your ZXm 2 RFQ

  • Required flow and delivery head including pipe losses
  • Liquid: clear water, grey water or sewage, and the largest solid or fibre length expected
  • Sump dimensions, operating depth and the delivery pipe size
  • Supply: voltage, frequency and phase, and control type (float switch, panel)
  • Duty cycle, number of pumps and delivery location

Documents and quotation

The manufacturer datasheet for the ZXm 2 is attached on this page, and the performance tables in it should be checked against your duty point. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.

Send the model code, quantity, voltage and frequency and the duty point, and we will confirm availability and prepare a quotation for Oman and the GCC.

Other Models in the Pedrollo Sub Range

Seven Star LLC supplies models from the Pedrollo Sub range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Pedrollo TOP Submersible Drainage Pump 0.25-0.92 kWCentrifugal PumpsView details
Pedrollo TOP-VORTEX Submersible Pump for Grey WaterCentrifugal PumpsView details
Pedrollo RX Stainless Steel Submersible Drainage PumpCentrifugal PumpsView details
Pedrollo TEX Submersible Grey Water Pump 0.37-0.55 kWCentrifugal PumpsView details
Pedrollo ZXm 2 Vortex Submersible Sewage PumpCentrifugal PumpsYou are viewing this model
Pedrollo BC Submersible Sewage Pump 0.75-1.5 kWCentrifugal PumpsView details
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Pedrollo is an Italian manufacturer of electric pumps, founded in 1974 by Silvano Pedrollo and headquartered in San Bonifacio, near Verona, where its plant covers more than 150,000 square metres. The company exports to over 160 countries through ten commercial branches, starting with Pedrollo France in 1987. Its pumps are used for domestic water supply, irrigation, boreholes, pressure boosting and drainage.

Seven Star LLC is an independent supplier in Muscat. We list Pedrollo pumps for homes, farms and contractors in Oman and the GCC.

Pedrollo company profile

Founded 1974, by Silvano Pedrollo
Headquarters San Bonifacio, Verona, Italy
Ownership Pedrollo family
Reach Exports to over 160 countries through ten commercial branches
Product families PKm peripheral pumps, CP and F centrifugal pumps, JSWm self-priming jet pumps, 4SR and 6SR submersible borehole pumps, TOP and VXm drainage pumps, HF high-flow pumps, pressure booster sets

Milestones

  • 1974: Silvano Pedrollo founds the company.
  • 1987: Pedrollo France, the first foreign branch, opens.
  • 2009: Pedrollo acquires a majority stake in Saci Pumps.

Pedrollo product series

Surface pumps include the CP close-coupled centrifugal pump from 0.25 to 2.2 kW, the 2CP twin-impeller pump from 1.1 to 11 kW, the F EN 733 close-coupled pump, the NGA open-impeller pump for dirty water and the HT vertical multistage pump.

Submersible pumps include the 4SR and 6SR borehole pumps for 4 and 6 inch wells and the VX vortex sewage pump.

Close-coupled centrifugal pumps suit clean water transfer and boosting, twin-impeller 2CP pumps give higher head at moderate flow, and the open-impeller NGA handles water with some solids. Submersible 4SR and 6SR pumps are matched to the well diameter, flow and depth, and the VX vortex pump passes solids in sewage and drainage.

Where Pedrollo pumps are used

Water supply and pressure boosting, irrigation, wells, tank transfer, and drainage and sewage.

Pedrollo products we list

Family Examples
Pumps 2CP Twin-Impeller Centrifugal Pump 1.1-1…, 4SR 4-Inch Submersible Borehole Pump, 6SR 6-Inch Submersible Borehole Pump, CP Close-Coupled Centrifugal Pump 0.25-2…, F EN 733 Close-Coupled Centrifugal Pump, HT Vertical Multistage Centrifugal Pump, NGA Open-Impeller Centrifugal Pump for D…

Ordering Pedrollo pumps: what we need

Send the model or the flow, head and liquid, the power supply and the well diameter or installation type.

Facts checked against Pedrollo's own history page (pedrollo.com), October 2026.

FAQ

Questions about the Pedrollo ZXm 2 Vortex Submersible Sewage Pump

Answers from our engineering team on installation, compatibility and integration.

01What do 30 and 40 mean in ZXm 2/30 and ZXm 2/40?
They are the maximum passage for suspended solids in millimetres, 30 mm and 40 mm, according to the manufacturer data.
02What is the minimum immersion?
265 mm for ZXm 2/30 and 275 mm for ZXm 2/40 in continuous service.
03Should the ZXm 2 be lifted by its cable?
Never. Lift and lower the pump with a chain or rope fixed to its handle, and keep the cable clear of the water surface end.
04Does the ZXm 2 need a float switch?
Automatic operation needs a float or level control, so confirm with us whether your model includes one.
05How often should the ZXm 2 be inspected?
Rinse after dirty duty and inspect the inlet, cable and float before heavy-use periods.