Brand:

Pedrollo TEX Submersible Grey Water Pump 0.37-0.55 kW

Description

Pedrollo TEX pump explained

The Pedrollo TEX is a submersible pump for grey water and sump emptying, rated up to 240 l/min (14.4 m³/h) and up to 10 m of head, passing solids up to 30 mm. It includes a compact magnetic float switch. Seven Star LLC supplies the TEX in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

TEX 2 is 0.37 kW with 8.5 m shutoff head and TEX 3 is 0.55 kW with 10 m. Draining capability is 35 mm and maximum depth is up to 5 m with an appropriately sized cable.

TEX technical specifications

Parameter Specification
Manufacturer / part number Pedrollo / TEX
Flow rate up to 240 l/min (14.4 m³/h)
Head up up to 10 m
Liquid temperature up to +40 °C(+90 °C for intermittent service up to 3 minutes)
Capable of processing suspended solids up to Ø 30 mm
Maximum operating depth below water level up to 5 m(with an appropriately sized power cable)
Draining capability 35 mm
Motor 2 poles
Ingress protection rating IP 68
Pump housing Technopolymer
Impeller Noryl™
Motor sleeve Stainless steel AISI 304
Shaft Stainless steel AISI 431

The values above come from the manufacturer technical data for the series. Individual models inside the TEX range differ in power, head and current, so always confirm the exact model code before ordering.

How the TEX works and what limits it

Housing is technopolymer, impeller Noryl, motor sleeve AISI 304, shaft AISI 431, IP 68. Liquid temperature up to +40 °C (+90 °C intermittent for up to three minutes). The integrated float lets the pump work in sumps as small as 220 mm on each side.

A submersible drainage pump has its motor and hydraulic end in one sealed unit that sits in the liquid itself. The surrounding liquid helps cool the motor, a double shaft seal separates the water from the windings, and the impeller moves the liquid up the delivery hose or pipe without any priming. The shape of the impeller sets what the pump can pass: a vortex or channel design leaves a free path for solids, whereas a closed multi-vane impeller gives more head on clean water. The data sheet therefore states both the maximum solid size and the draining capability, meaning the lowest level at which the pump still moves water.

The TEX is the smaller of the two grey-water designs in this group. The two models use the same technopolymer housing and Noryl impeller, differing in motor power (0.37 and 0.55 kW) and head (8.5 and 10 m at the first table point). The 35 mm draining capability is the lowest water level at which the pump still moves water, which matters in a sump where you want to leave as little standing water as possible. Pedrollo specifies the magnetic float so the sump width can be as small as 220 mm, which makes the TEX a practical retrofit for tight lift pits.

Check the largest object that can reach the inlet before choosing: the stated passage is 30 mm of suspended solids, and rags, wipes and long fibres are not covered by that figure.

TEX models and performance data

Model Rated power P2 Head at first table point (50 Hz)
TEX 2 0.37 kW / 0.50 HP 8.5 m
TEX 3 0.55 kW / 0.75 HP 10 m

The heads in this table are read from the first point of the manufacturer 50 Hz performance table and fall as flow increases, so use the full curve for the real duty point. Where a 60 Hz version is needed, ask us: the manufacturer states that 60 Hz motors are available on request for many models.

Where the TEX fits: related Pedrollo pumps

For larger solids see BC and ZXm 2; for clear water see TOP and RX.

Selecting a TEX pump: checklist

  • TEX 2 or 3 by head
  • Solids up to 30 mm
  • Check the small sump size
  • Single-phase
  • Depth up to 5 m

Installing and maintaining the TEX

Place the pump on a firm base inside the sump, not directly on silt, so the inlet is not blocked. Connect a delivery pipe or hose of at least the port size, and add a non-return valve when the head is significant or when several pumps share one line. Use the float switch type recommended for the model and make sure the float swings freely and cannot catch the pipe or the cable. Never carry or lift the pump by the electric cable, keep the cable end above any possible water level, and respect the maximum immersion depth. Rinse the pump after dirty duty, clean the inlet area from time to time, and inspect the cable, float and seal before the flood season or before heavy use.

TEX applications in Oman and the GCC

Stationary sump use plus portable use in tanks, ditches or after floods. In the GCC this suits small lift pits, laundry drains and shaft sumps.

Drainage pumps in Oman see two quite different duties: steady daily sump emptying, and rare but severe flood events after heavy rain in the wadis. For the second case a spare pump kept dry and tested beforehand matters more than anything else. Keep the electrical connection above the flood level, protect the supply with an earth-leakage device and keep sand away from the inlet.

Information to send with your TEX RFQ

  • Required flow and delivery head including pipe losses
  • Liquid: clear water, grey water or sewage, and the largest solid or fibre length expected
  • Sump dimensions, operating depth and the delivery pipe size
  • Supply: voltage, frequency and phase, and control type (float switch, panel)
  • Duty cycle, number of pumps and delivery location

Documents and quotation

The manufacturer datasheet for the TEX is attached on this page, and the performance tables in it should be checked against your duty point. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.

Send the model code, quantity, voltage and frequency and the duty point, and we will confirm availability and prepare a quotation for Oman and the GCC.

Other Models in the Pedrollo Sub Range

Seven Star LLC supplies models from the Pedrollo Sub range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Pedrollo TOP Submersible Drainage Pump 0.25-0.92 kWCentrifugal PumpsView details
Pedrollo TOP-VORTEX Submersible Pump for Grey WaterCentrifugal PumpsView details
Pedrollo RX Stainless Steel Submersible Drainage PumpCentrifugal PumpsView details
Pedrollo TEX Submersible Grey Water Pump 0.37-0.55 kWCentrifugal PumpsYou are viewing this model
Pedrollo ZXm 2 Vortex Submersible Sewage PumpCentrifugal PumpsView details
Pedrollo BC Submersible Sewage Pump 0.75-1.5 kWCentrifugal PumpsView details
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Pedrollo is an Italian manufacturer of electric pumps, founded in 1974 by Silvano Pedrollo and headquartered in San Bonifacio, near Verona, where its plant covers more than 150,000 square metres. The company exports to over 160 countries through ten commercial branches, starting with Pedrollo France in 1987. Its pumps are used for domestic water supply, irrigation, boreholes, pressure boosting and drainage.

Seven Star LLC is an independent supplier in Muscat. We list Pedrollo pumps for homes, farms and contractors in Oman and the GCC.

Pedrollo company profile

Founded 1974, by Silvano Pedrollo
Headquarters San Bonifacio, Verona, Italy
Ownership Pedrollo family
Reach Exports to over 160 countries through ten commercial branches
Product families PKm peripheral pumps, CP and F centrifugal pumps, JSWm self-priming jet pumps, 4SR and 6SR submersible borehole pumps, TOP and VXm drainage pumps, HF high-flow pumps, pressure booster sets

Milestones

  • 1974: Silvano Pedrollo founds the company.
  • 1987: Pedrollo France, the first foreign branch, opens.
  • 2009: Pedrollo acquires a majority stake in Saci Pumps.

Pedrollo product series

Surface pumps include the CP close-coupled centrifugal pump from 0.25 to 2.2 kW, the 2CP twin-impeller pump from 1.1 to 11 kW, the F EN 733 close-coupled pump, the NGA open-impeller pump for dirty water and the HT vertical multistage pump.

Submersible pumps include the 4SR and 6SR borehole pumps for 4 and 6 inch wells and the VX vortex sewage pump.

Close-coupled centrifugal pumps suit clean water transfer and boosting, twin-impeller 2CP pumps give higher head at moderate flow, and the open-impeller NGA handles water with some solids. Submersible 4SR and 6SR pumps are matched to the well diameter, flow and depth, and the VX vortex pump passes solids in sewage and drainage.

Where Pedrollo pumps are used

Water supply and pressure boosting, irrigation, wells, tank transfer, and drainage and sewage.

Pedrollo products we list

Family Examples
Pumps 2CP Twin-Impeller Centrifugal Pump 1.1-1…, 4SR 4-Inch Submersible Borehole Pump, 6SR 6-Inch Submersible Borehole Pump, CP Close-Coupled Centrifugal Pump 0.25-2…, F EN 733 Close-Coupled Centrifugal Pump, HT Vertical Multistage Centrifugal Pump, NGA Open-Impeller Centrifugal Pump for D…

Ordering Pedrollo pumps: what we need

Send the model or the flow, head and liquid, the power supply and the well diameter or installation type.

Facts checked against Pedrollo's own history page (pedrollo.com), October 2026.

FAQ

Questions about the Pedrollo TEX Submersible Grey Water Pump 0.37-0.55

Answers from our engineering team on installation, compatibility and integration.

01Does the TEX have a float switch?
Yes, a compact integrated magnetic float switch is part of the design.
02What is the smallest sump the TEX fits in?
Sumps as small as 220 mm on each side, according to the manufacturer.
03Should the TEX be lifted by its cable?
Never. Lift and lower the pump with a chain or rope fixed to its handle, and keep the cable clear of the water surface end.
04Does the TEX need a float switch?
Automatic operation needs a float or level control, so confirm with us whether your model includes one.
05How often should the TEX be inspected?
Rinse after dirty duty and inspect the inlet, cable and float before heavy-use periods.