APC SRTG192XLBP4 Smart-UPS RT Battery Pack 192V rackmount 3U wo

SRTG192XLBP4 battery details

For UPS runtime and battery replacement work, the APC SRTG192XLBP4 is listed as Smart-UPS RT Battery Pack 192V rackmount 3U wo rail kit.

Chemistry: lead-acid battery. Each unit measures 130 mm x 440 mm x 683 mm (H x W x D) and weighs 91 kg.

Technical specifications

Electrical and replacement data

Replacement reference: APCRBC174. Battery voltage: 192 V. Battery life: 3…5 year(s).

Battery replacement should be matched to the exact UPS model named in the APC documentation, because voltage, connector and cartridge count differ between systems. Used batteries must be recycled according to local regulations.

Physical data and environment

Dimensions are 130 mm x 440 mm x 683 mm (H x W x D), and the unit weighs 91 kg. Colour: black.

Listed operating limits: operating temperature 0…40 °C; relative humidity 0…95 % non-condensing; operating altitude 0…6600 ft.

Warranty recorded by APC (months): 24.

The APC SRTG192XLBP4 is listed with type lead-acid battery, voltage 192 V, battery life 3…5 year(s). Replacement batteries should be fitted as a complete set of the same type and age, because mixing old and new cells shortens the life of the whole string. Fit and wire the cartridge exactly as shown in the installation sheet, and recycle used batteries according to local regulations.

The unit measures 130 mm x 440 mm x 683 mm (H x W x D) and weighs 91 kg, so check the available space and the handling requirements before delivery. It occupies 3U of rack space. Listed environmental limits: operating temperature 0…40 °C; relative humidity 0…95 % non-condensing; altitude 0…6600 ft. Store and operate the battery within these limits, because heat shortens service life.

The warranty period recorded in the product data is 24 months. If a project requires certificates or test reports, include that request with the quotation request.

Where the SRTG192XLBP4 fits in an APC Smart-UPS RT installation

Smart-UPS RT models are an earlier generation of APC double-conversion on-line UPS in rack/tower convertible housings with external battery pack support. Many are still in service in server rooms and control buildings, which is why like-for-like units, batteries and accessories for the RT range remain in demand.

An external battery pack adds runtime by connecting additional battery strings to the DC bus of a compatible UPS. The pack voltage and connector must match the UPS, and the UPS should be told how many packs are connected so that runtime estimates and charging stay correct. Packs are normally daisy-chained, so the total runtime can be built up step by step as the load or the outage risk of the site grows.

In the product data for the APC SRTG192XLBP4, its battery technology is listed as lead-acid battery; the battery voltage is 192 V; it occupies 3U rack unit(s). These values are the starting point for matching it to the rest of the installation.

Using the SRTG192XLBP4 in Gulf climate and grid conditions

The listed operating temperature tops out at 40 °C. Summer shade temperatures in Muscat, Sohar and the interior regularly pass 45 °C, so the equipment belongs in an air-conditioned room or cabinet rather than an open plant area. Battery temperature has the biggest effect on service life: as a rule of thumb, the life of a valve-regulated lead-acid battery roughly halves for every 10 °C above 25 °C, so a room held at 20 to 25 °C pays back in fewer battery replacements. Fine dust inland and humid, salty air on the coast are hard on electronics, so a sealed room, clean filters and periodic inspection of fans and terminals are part of a reliable installation. At 91 kg the unit needs two people or lifting equipment for installation, and rails rather than a shelf if it goes into a rack.

Service life and maintenance of the APC SRTG192XLBP4

Plan inspections at least once a year: check that the equipment is clean, that fans and filters are free of dust, that cable terminations are tight and that no alarms are stored in the event log. Where a UPS is involved, run a self-test and a short battery test under real load, and record the results so that a gradual loss of runtime is noticed before it becomes a failure. Replace batteries as a complete set, never by mixing old and new blocks, and keep the replaced items for proper recycling.

Seven Star LLC supplies APC equipment as an independent supplier based in Muscat. Original product documents are provided where available, and the part number SRTG192XLBP4 can be quoted together with related batteries, accessories and spares in one enquiry.

Information to include when ordering the SRTG192XLBP4

A complete enquiry lets Seven Star LLC confirm compatibility and quote without back-and-forth. Include:

• The exact UPS model the pack will be connected to
• How many packs are already connected and how many are needed
• The runtime target at the actual load
• Rack or tower installation and available rack units
• The delivery location in Oman (for example Muscat, Sohar, Duqm or Salalah) or elsewhere in the GCC, and the required date

The replacement battery for this unit is the APC APCRBC174, which can be quoted together with the UPS or kept as a spare.

More APC power protection products are listed on the APC brand page, and the wider Schneider Electric range is available from the same supply channel.

Documents and quotation

The instruction sheet for the SRTG192XLBP4 is hosted on this page under Documents so the wiring, installation and operating details can be reviewed before ordering.

The single-unit shipping package is listed as 33.5 cm (height) x 78 cm (width) x 58 cm (length) with a packed weight of 101.5 kg. Use these values when planning freight, lifting and receiving space.

To order, submit the part number SRTG192XLBP4, the quantity and the delivery location. Related items are grouped under UPS and Batteries. Seven Star LLC is an independent supplier based in Muscat and answers with availability and a quotation.