Winsonic NE10004-00842B – EN50155 IP65 Unmanaged 10G M12 PoE++ Switch

Overview

The Winsonic NE10004-00842B is a railway-grade EN50155, IP65, unmanaged 10G M12 PoE++ industrial Ethernet switch engineered for rolling stock, vehicle networks, ports & marine, and harsh outdoor cabinets. With M12 X-coded locking connectors, this railway Ethernet switch resists shock, vibration, dust, and moisture and delivers plug-and-play reliability for mission-critical edge devices. The NE10004-00842B combines 2×10/100/1000/10GBase-T M12 uplinks with 8×10/100/1000Base-T M12 PoE++ downlinks, giving you a compact 10-port platform that simplifies expansions without managed configuration overhead. If you need an industrial Ethernet switch that brings 10G copper to the edge and powers cameras, APs, HMIs, and IIoT nodes over PoE++, the Winsonic NE10004-00842B is built for fast deployment and long-term uptime.

Key Features & Specifications

• Ports & Performance: 2×10G uplinks + 8×1G M12 X-coded downlinks (10 ports total); store-and-forward architecture; 56 Gbps switching fabric; 16K MAC table; <10 µs latency for deterministic video/control.

• PoE/PoE+/PoE++ Power: 8× IEEE 802.3af/at/bt downlinks, up to 90 W per port; dynamic total PoE budget by input voltage (200 W @ 36 VDC, 120 W @ 24 VDC, 60 W @ 12 VDC); port-priority logic (Port 8 > 7 > 6 …) keeps critical loads online.

• Rugged Design: IP65 sealed aluminum housing, EN50155 compliance for rail, IEC 60068 shock/vibration; EMC per FCC/EN55022 Class A—ideal for railway Ethernet and mobile applications.

• Power Input: 12–36 V DC via M12 A-coded connector; dual-input redundancy and reverse-polarity protection for resilient operation.

• Thermal & Mechanical: −40 ~ +80 °C fanless operation; compact 186 × 121 × 30 mm, ~1.13 kg; wall-mount hardware and clear LED indicators.

• Unmanaged Simplicity: True plug-and-play unmanaged 10G switch—no CLI/Web config, no learning curve—perfect when speed and stability matter more than feature tuning.

Why it fits rail & outdoor projects

For rolling stock and wayside, vibration and temperature kill consumer gear. The Winsonic NE10004-00842B EN50155 IP65 M12 PoE++ switch solves that with M12 X-coded locking, −40~80 °C operation, and high PoE++ per port. You get 10G uplinks for aggregation/backhaul and eight PoE++ downlinks to power PTZ cameras, 802.11 APs, HMIs, and NVRs—without external injectors. As an industrial Ethernet switch that is unmanaged, it’s purpose-built for rapid, repeatable deployments across fleets, depots, yards, and outdoor smart-infrastructure.

Applications

• Railway Ethernet (EN50155): on-board CCTV, Wi-Fi, passenger info, and inter-carriage networking in coaches/locomotives; wayside/trackside cabinets.

• Vehicle networks & smart transportation: buses, trams, service fleets needing M12 PoE++ and 10G uplinks with minimal setup.

• Ports & marine/offshore: cameras, APs and NVRs in salt-mist, vibration, and shock environments.

• Surveillance & CCTV: high-power PoE++ for PTZ domes and thermal cameras; unmanaged 10G uplinks for NVR clusters.

• Industrial automation & IIoT: outdoor cabinets, factories, and smart-city nodes requiring IP65, M12, and plug-and-play reliability.

Choosing Managed vs. Unmanaged

The NE10004-00842B’s unmanaged design is a deliberate trade-off: it drops VLAN, ring-redundancy, and port-mirroring configuration in exchange for true plug-and-play deployment with zero CLI or web-interface learning curve. For fleets or sites where every switch needs to behave identically out of the box, and where a technician swapping a failed unit shouldn’t need network-configuration training, this simplicity is the point — not a limitation. Sites that do need VLAN segmentation or ring redundancy across many switches should instead look at Winsonic’s managed NE10001/NE10005 siblings in the same EN50155 M12 PoE++ family.

Helpful Links

• Official Product Page (Winsonic):

Technical Specifications

Planning the PoE++ Power Budget

The total PoE budget depends on the input voltage, so the power source should be fixed before the connected devices are finalised. List every powered device with its PoE class and maximum draw, add up the loads, and compare the total with the budget available at the vehicle or cabinet supply voltage (200 W at 36 VDC, 120 W at 24 VDC, 60 W at 12 VDC). Where the total approaches the limit, use the port-priority order to place critical loads, such as safety cameras, on the higher-priority ports so they stay powered if demand exceeds the budget.

Switch Installation and Commissioning

Mount the switch on a rigid surface with the wall-mount hardware, leaving space around the fanless housing for heat to dissipate, particularly in enclosed cabinets. Use M12 X-coded cables for the Ethernet ports and an M12 A-coded cable for power, tighten each connector fully so the IP65 sealing is effective, and cap unused ports. Where two power sources are available, connect both inputs for redundancy. After power-up, check the LEDs for link and PoE status, confirm that each powered device boots, and verify that the 10G uplinks negotiate at the expected speed.

Troubleshooting

• Device not powering – check the PoE budget at the actual supply voltage and the port priority order
• Uplink at reduced speed – verify cable category and length for 10GBase-T and inspect connector pins
• Intermittent links on vehicles – M12 connectors not fully locked, or cables without strain relief
• Network flooding – an unmanaged switch cannot block loops, so check for accidental cable loops between switches

Applications in Oman and the GCC

In the region, the Winsonic NE10004-00842B fits outdoor CCTV at port facilities, perimeter surveillance at industrial sites, transport projects and mobile units that must keep running through high summer temperatures and dust. The −40 to +80 °C fanless rating and sealed housing suit cabinets exposed to heat, while the unmanaged design keeps field replacement simple for maintenance crews. Seven Star LLC supplies Winsonic industrial networking products and can review PoE loads and power source details with your team before ordering.

Request a Quote for Winsonic NE10004-00842B – EN50155 IP65 Unmanaged 10G M12 PoE++ Switch

Seven Star LLC is the official authorized representative of Winsonic in Oman, and supplies the Winsonic NE10004-00842B on request with manufacturer documentation and technical support across Oman and the GCC. Share your PoE loads, power source (12/24/36 V), and mounting photos—we’ll validate budgets and confirm availability, then prepare a formal quotation. Request a quote or datasheet today and deploy a proven EN50155 IP65 unmanaged 10G M12 PoE++ switch on your next project.

Related Products

• 16137-224 – Siemens APACS+/QUADLOG I/O BUS A Side Cable (2.5 M)
• Winsonic NE10005-008423 | EN50155 M12 PoE++ Managed Switch
• Aastra ROF1376303/1 – DC/DC MX-One Board
• FiberHome FonsWeaver 550F O2500 Optical Interface Board (STM-16)
• Loop Telecom O9500R PTN 10GE MPLS Multiservice SDH SONET Platform
• 16413-1-1 / 16413-1-5 – Siemens APACS MBI/NMI PCI Card