Gewiss GW62220H 10 Degree Flush Socket 32A 3P+E IP44/IP54

GW62220H is a 10 degree angled flush-mounting socket-outlet from the Gewiss IEC 309 HP range, rated 32 A, 3P+E, 380-415 V, 50/60 Hz, with IP44/IP54 protection, red housing, reference position 6 h, screw wiring and a 95 x 80 mm flange. The 10 degree tilt makes the plug entry point slightly downward, which keeps cables from pulling out sideways on wall-mounted panels.

Angled socket-outlet for panels and enclosures

Flush-mounting socket-outlets are fitted into switchboards, enclosures and machine fronts so that only the face of the socket shows. The 10 degree angled version is the most common choice for wall-mounted or frame-mounted panels, because trailing cables leave the plug at a convenient angle and the lid drains water away from the opening.

Within the HP range the 32 A sockets share the same internal construction as the plugs: nickel-plated sleeves and pins for corrosion and abrasion resistance, and technopolymers selected for resistance to mechanical and chemical agents. The datasheet lists halogen-free material to EN 60754-2.

Key features as printed in the datasheet

• 10 degree angled flush-mounting socket-outlet, 32 A, 3P+E, 380-415 V, 50/60 Hz.
• IP44/IP54 protection and IK09; red; reference position 6 h.
• Flange 95 x 80 mm; fixing positions are shown in the datasheet drawing.
• Terminals for 2.5-6 mm2 flexible and 2.5-10 mm2 rigid conductors.
• More than 2000 operations; breaking capacity at 1.1 Un 40 A; permissible overload 42 A.
• Operating temperature -25 to +55 C; halogen-free, EN 60754-2.

Technical specification

Electrical

Mechanical and environmental

Selection and ordering guide

Pick this code for a 32 A, three-phase plus earth (no neutral) angled panel socket. Related codes in the Gewiss list include the 16 A version (GW62209H) and the 3P+N+E, IP66/IP67 blue 9 h version (GW62240FH); they differ in current, poles, colour or IP degree and are not interchangeable.

The IP44/IP54 rating applies to this angled flush socket; for continuous wash-down choose the IP66-IP69 sealed plugs and connectors and keep the socket protected inside a panel or under a canopy.

Installation and operation notes

Cut the panel opening to the 95 x 80 mm flange and use the fixing holes shown in the datasheet drawing. Terminate with the supply isolated and torque the screw terminals firmly.

Observe the -25 to +55 C range; for Gulf outdoor panels, shading and ventilation help keep the socket body within limits.

A note on the two IP values: the datasheet prints IP44/IP54 as a pair and does not explain each value separately, so ask us or Gewiss if your specification needs one figure. For a cable that stays plugged in outdoors, specify the sealing options of the matching plug and keep the cable loop pointing downward so that water cannot run into the socket; the 10 degree angle helps with that on a vertical panel.

Applications in Oman and the GCC

Common on site distribution boards, welding and fabrication bays, plant utility panels, mobile generator output panels and portable equipment racks.

The three-pole plus earth configuration suits three-wire motor loads (pumps, fans, hoists) without neutral and 400 V three-phase tools; confirm the load voltage matches 380-415 V.

Installation and selection notes

GW62220H is a three-pole plus earth, 32 A socket without a neutral, so it supplies three-phase loads such as motors, but not equipment that needs a neutral conductor. Cut the panel opening to suit the 95 x 80 mm flange, seal the flange against the panel and use a plug with the same 6 h position. The IP44/IP54 rating means the lid must be closed when the socket is not in use.

Information needed for a quotation

Send the code GW62220H, the quantity and the delivery location in Oman or the GCC, and list any matching plugs so that a complete set can be quoted.

Documents and supply information

The manufacturer data sheet is attached to this page and should be read together with the project specification before a purchase is confirmed. Ratings, dimensions and protection classes are quoted as printed on that sheet. Lead time, stock position and certificates available with the shipment are confirmed in the quotation, and we supply to Oman and the wider GCC region for industrial, utility and building services projects.

Compatible accessories and related items

Mating plug in the same family: the red 32 A HP plug family (for 3P+E, ask for the matching code; the 3P+N+E plug GW60042H is for five-pole circuits). Inlet GW60241 and connector GW62042H complete the range.

Frequently asked questions

What does 10 degree angled mean?

The socket opening is tilted 10 degrees from the mounting plane so the plug and cable point downward on a vertical panel.

What are the key ratings?

32 A, 3P+E, 380-415 V, 50/60 Hz, IP44/IP54, IK09, red, 6 h.

What flange size does the panel need?

Flange dimensions are 95 x 80 mm per the datasheet.

How many operations is it rated for?

More than 2000 operations.

Is Seven Star LLC a Gewiss distributor?

No, we are an independent supplier in Muscat and supply Gewiss items on request rather than acting as a Gewiss channel partner.

Documents and quotation

For quotation, send your required quantity and destination. The Gewiss product data sheet for GW62220H is provided below the description on this page. Seven Star LLC works as an independent supplier from Muscat. Please compare code, ratings and approvals with the document before you place an order; see also the category listing.