Biffi OLGAS-H Fail-Safe Hydraulic Actuator

Overview

The Biffi OLGAS-H is the spring-return, fail-safe hydraulic scotch-yoke actuator in Biffi’s OLGA family, built for large-bore emergency shutdown and safety valve automation where hydraulic torque capacity is required but a guaranteed mechanical fail-safe action is non-negotiable. It shares the OLGA-H’s high-torque hydraulic cylinder architecture, working in the 140–210 bar range, but one side of the piston assembly is permanently loaded against a heavy-duty spring cartridge sized to drive large-bore valves to their safe position on loss of hydraulic pressure, loss of electrical signal, or an ESD trip, without depending on a continuously pressurized hydraulic accumulator.

Working closely with plant engineers in the region, Seven Star LLC supplies the OLGAS-H fail-safe hydraulic actuator, and the complete Biffi safety actuation range, to EPC contractors and safety engineers across the Sultanate of Oman and the wider GCC.Seven Star LLC supplies this item on request with the manufacturer documentation, and availability and lead time are confirmed at quotation.

Operating Principle of the Biffi OLGAS-H

The Biffi OLGAS-H uses the same scotch-yoke hydraulic conversion as the double-acting OLGA-H, but the return stroke is driven by a large, factory pre-compressed spring cartridge rather than hydraulic pressure on the return side. During normal operation, hydraulic pressure compresses the spring pack and holds the valve in its energized position; on loss of hydraulic supply pressure, a solenoid de-energizing on an ESD signal, or an actual system failure, the spring pack releases its stored mechanical energy and drives the valve to its safe position purely mechanically, independent of any continued hydraulic supply.

Because the fail-safe action does not depend on stored hydraulic pressure in an accumulator, the OLGAS-H avoids the added maintenance burden and periodic testing requirement of accumulator-based fail-safe systems, while still delivering the high torque output that only a hydraulic actuator platform can provide at this scale. Spring force is calculated during actuator selection against the valve’s worst-case breakout and running torque, a sizing exercise our engineering team carries out on every OLGAS-H enquiry to ensure correct, not over-specified, actuator selection.

Engineering Design of the Biffi OLGAS-H

The Biffi OLGAS-H engineering shares the OLGA-H’s heavy-duty cast or fabricated steel housing and reinforced ISO 5211 mounting interface, extended to house the large spring cartridge assembly, which is factory pre-compressed and shipped in a secured, safe-to-handle condition. Spring cartridges are available across multiple force ranges per body size, allowing the fail-safe torque to be matched precisely to large-bore valve requirements without over-sizing the actuator body.

A manual override hand-pump allows technicians to stroke the valve against spring force for functional testing without discharging the full stored spring energy, and hydraulic porting accepts standard high-pressure fittings for integration with a dedicated Biffi hydraulic power unit or a centralized plant hydraulic supply. IP66/IP67 enclosure protection is standard, with corrosion-resistant coatings available for the coastal and offshore installations found across Oman’s Sohar and Salalah industrial zones, and the actuator accepts hydraulic accessories such as solenoid-operated directional control valves on the same mounting interface used for the valve connection.

Key Features

The Biffi OLGAS-H combines large-bore hydraulic torque capacity with a fully mechanical, spring-driven fail-safe action.

• The spring-return hydraulic scotch-yoke mechanism drives large-bore valves to their fail-safe position automatically on loss of hydraulic pressure or an ESD signal.
• Spring cartridges are available in multiple force ranges per body size, matching fail-safe torque precisely without over-sizing the actuator.
• The fail-safe action does not rely on a continuously pressurized hydraulic accumulator, reducing periodic testing and maintenance burden.
• Working pressures in the 140–210 bar range deliver hydraulic torque output suited to large-bore pipeline and terminal valves.
• A manual override hand-pump allows functional testing of the valve stroke without discharging the actuator’s full spring energy.
• Reinforced ISO 5211 mounting matches the double-acting OLGA-H, simplifying spare-parts logistics across a mixed hydraulic actuator fleet.
• IP66/IP67 enclosure protection with optional corrosion-resistant coatings suits both onshore and coastal offshore GCC installations.
• Integration with a centralized hydraulic power unit avoids the need for a standalone accumulator system at every valve.

Industrial Applications

The Biffi OLGAS-H is specified for large-bore emergency shutdown valves on pipeline block-valve stations, export terminal manifolds, and LNG facility isolation duty, wherever a guaranteed mechanical fail-safe closing action is required at a torque scale beyond what pneumatic spring-return actuators can practically deliver. Across Oman’s major gas transmission and export infrastructure, OLGAS-H actuators are specified on large-bore ESD valves where a stuck-open valve during a plant trip carries severe safety and environmental consequences, and the actuator’s purely mechanical spring-driven fail-safe action provides assurance independent of continued hydraulic system integrity.

With fast quotation turnaround and technical support, Seven Star LLC distributes the OLGAS-H to safety and instrumentation departments delivering pipeline and terminal infrastructure across the Sohar and Salalah economic free zones, and to operators across the GCC upgrading ageing large-bore ESD valve fleets to a genuine, traceable fail-safe actuator platform. Regional hydraulic and spring-cartridge sizing support from Seven Star LLC keeps safety-critical replacement projects on schedule without long international engineering cycles.

Technical Specifications

The Biffi OLGAS-H technical specifications table below summarizes the principal design and performance parameters of the Biffi OLGAS-H fail-safe hydraulic actuator.

Request a Quote for Biffi OLGAS-H Fail-Safe Hydraulic Actuator

For large-bore emergency shutdown and safety valve automation with the Biffi OLGAS-H, Seven Star LLC invites engineers across Oman and the GCC to submit a formal RFQ. Our instrumentation division provides hydraulic and spring-cartridge sizing calculations, technical datasheets, and SIL-relevant documentation on request. With engineering support in Muscat, Seven Star LLC supplies Emerson-Biffi fail-safe hydraulic actuation equipment on request, with technical support with selection – contact our team today for your large-bore ESD valve project.

Related Products

• SAMSON Type 3271 Pneumatic Diaphragm Actuator
• ABB-Electrical rotary actuator RHD16000 (Contrac)
• Biffi ALGAS Spring-Return Pneumatic Actuator
• Biffi F02 Electric Quarter-Turn Actuator
• AUMA MATIC AM/AC Integral Actuator Controls
• Flowserve Limitorque L120 Quarter-Turn Electric Actuator
• Biffi OLGA-H Hydraulic Quarter-Turn Actuator
• Biffi F01 Electric Quarter-Turn Actuator

Also available: Biffi RPHD High-Torque Electro-Hydraulic Actuator