Brand:

Moxa NPort 5650-8 8-Port RS-232/422/485 Rackmount Device Server

Description

What the NPort 5650-8 gives a serial instrument

Moxa describes the NPort 5650-8 as 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100 to 240 VAC power input. An eight-port rackmount device server where every RJ45 port is software-selectable between RS-232, RS-422 and RS-485.

From the manufacturer’s specification table, the power input is 100 to 240 VAC, 47 to 63 Hz; operating temperature is 0 to 60°C (32 to 140°F); dimensions are 482.60 x 43.65 x 198.25 mm (19.00 x 1.72 x 7.80 in); weight is 2,430 g (5.09 lb).

Standards and approvals printed for this model include safety standard UL 62368-1. Approvals can differ between variants of a series, so check the one on the exact order code.

Technical specifications

Parameter Specification
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)
Optical Fiber Read more 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX …
Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, RFC2217, Rtelnet, PPP, SLIP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP
Filter IGMP v1/v2c
Time Management SNTP
Authentication Local database
Encryption HTTPS; AES-128; RSA-1024; SHA-1; SHA-256
Security Protocols HTTPS (TLS 1.2); SNMPv3
Connector 8-pin RJ45
No. of Ports 8
Serial Standards RS-232; RS-422; RS-485
Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None; RTS/CTS (RS-232 only); DTR/DSR (RS-232 only); XON/XOFF
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485 120 ohms
RS-485 Data Direction Control Automatic Data Direction Control (ADDC)
Operation Modes Real COM, TCP Client, TCP Server, UDP, Ethernet Modem, Pair Connection, Reverse Telnet, RFC2217, Disabled
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Input Current 158 mA @ 100 VAC
Input Voltage 100 to 240 VAC, 47 to 63 Hz
Automatic Reboot Trigger Built-in WDT
Housing Metal
Dimensions (with ears) 482.60 x 43.65 x 198.25 mm (19.00 x 1.72 x 7.80 in)
Dimensions (without ears) 440 x 43.65 x 198.25 mm (17.32 x 1.72 x 7.80 in)
Weight 2,430 g (5.09 lb)
Installation 19-inch rack mounting
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature (package included) -20 to 70°C (-4 to 158°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
EMC EN 55032/35
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m; IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV; IEC 61000-4-5 Surge: Power: 2.5 …
Safety UL 62368-1
Medical EN 55011: 2007+A2: 2007 Class A (Group 1) compliant; EN 60601-1-2: 2007 compliant
Warranty Period 5 years

Where it fits and what to check

The mixed-interface capability is valuable where a rack holds both RS-232 consoles and RS-485 field links, such as in SCADA front-end rooms.

On the practical side, mounting is listed as 19-inch rack mounting; the housing is metal; the stated MTBF is 754,927 hrs; the warranty period is 5 years. Treat the MTBF as a manufacturer prediction under its stated method, not a guarantee for your site.

Please check the power option (AC, wide-range or DC), and whether fiber or -T variants are required before you place an order. Seven Star LLC supplies as an independent company and prices against the precise code requested.

Related models in the NPort 5650-8 family

The Moxa product list shows these models in the same family page (16 entries): NPort 5610-16, NPort 5610-16-48V, NPort 5610-8, NPort 5610-8-48V, NPort 5630-16, NPort 5630-8, NPort 5650-16, NPort 5650-16-HV-T, NPort 5650-16-M-SC, NPort 5650-16-S-SC, NPort 5650-16-T, NPort 5650-8, NPort 5650-8-HV-T, NPort 5650-8-M-SC, NPort 5650-8-S-SC, NPort 5650-8-T. Suffixes such as -T generally mark wide-temperature versions and fiber suffixes (M, S, MM, SS with SC or ST) mark the connector and fiber type, but the order code printed on the datasheet governs.

Documents and quotation

The attached file is Moxa’s published datasheet for the family (moxa-nport-5600-series-datasheet-v1.9). For a quotation, send the full order code, the quantity required and where the goods are to be delivered.

More products in this range: Industrial Communications.

Datasheets & Documents
  • PDF Datasheet Moxa NPort 5600 series datasheet v1.9 Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Since 1987 Moxa, based in New Taipei City, Taiwan, has built networking hardware for places where an office switch would fail: substations, wellhead panels, roadside cabinets. Seven Star LLC lists Moxa industrial Ethernet switches and fiber converters and supplies Moxa networking devices to system integrators and plant teams in Oman as an independent supplier. Each request is checked against the full Moxa model name before we quote.

Moxa switches and converters listed here

The EDS-G508E is a managed switch with eight Gigabit ports from the EDS managed line. The EDS-316-MM-SC-T is a 16-port unmanaged switch with 14 copper ports, two multi-mode SC fiber ports and the wide-temperature option (-40 to 75 C). The TCF-142-S-SC-T belongs to the TCF-142 series, which converts RS-232/422/485 serial signals to single-mode fiber. Moxa also makes serial device servers, protocol gateways, wireless devices and industrial computers, used on SCADA and telemetry networks across the GCC.

Ordering Moxa devices: what we need

The suffixes carry the specification. Send the complete model name, including fiber mode and connector (MM-SC, SS-SC, ST), the -T wide-temperature suffix and any coating or approval suffix. Add the power supply voltage, the SFP modules needed and the quantity.

Frequently Asked Questions

What is the Moxa NPort 5650-8?
Moxa lists it as: 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100 to 240 VAC power input. An eight-port rackmount device server where every RJ45 port is software-selectable between RS-232, RS-422 and RS-485.
What power supply does the NPort 5650-8 need?
The Moxa specification gives an input voltage of 100 to 240 VAC, 47 to 63 Hz. Check the terminal arrangement and, where relevant, the redundant-input wiring against your panel supply before ordering.
What operating temperature range applies to the NPort 5650-8?
The listed operating temperature is 0 to 60°C (32 to 140°F). Wide-temperature versions carry a -T suffix in Moxa's order codes where the series offers them, and they are separate order codes.
Which serial interfaces does the NPort 5650-8 offer?
The datasheet lists RS-232; RS-422; RS-485 on 8-pin RJ45, with 8 serial port(s).
Where is the NPort 5650-8 datasheet and how do I ask for a quotation?
You can download the Moxa datasheet from this page. For a quotation, send us the full order code, quantity and destination; Seven Star LLC is an independent supplier based in Muscat.