APCRBC123 Replacement Battery Cartridge # 123

Where the APCRBC123 fits

APCRBC123 is catalogued by APC as Replacement Battery Cartridge # 123 with 2 Year Warranty.

Chemistry: lead-acid battery. Each unit measures 76 mm x 152 mm x 203 mm (H x W x D) and weighs 5.21 kg.

Technical specifications

Battery data and handling

Battery voltage: 24 V. Battery capacity: 7.0 Ah.

Battery replacement should be matched to the exact UPS model named in the APC documentation, because voltage, connector and cartridge count differ between systems. Used batteries must be recycled according to local regulations.

Physical data and environment

Dimensions are 76 mm x 152 mm x 203 mm (H x W x D), and the unit weighs 5.21 kg.

Warranty recorded by APC (months): 24.

The APCRBC123 is listed with type lead-acid battery, voltage 24 V, capacity 7.0 Ah. Replacement batteries should be fitted as a complete set of the same type and age, because mixing old and new cells shortens the life of the whole string. Fit and wire the cartridge exactly as shown in the installation sheet, and recycle used batteries according to local regulations.

The unit measures 76 mm x 152 mm x 203 mm (H x W x D) and weighs 5.21 kg, so check the available space and the handling requirements before delivery.

The warranty period recorded in the product data is 24 months. If a project requires certificates or test reports, include that request with the quotation request.

How the APCRBC123 is used in APC systems

APC by Schneider Electric is one of the most widely installed UPS brands worldwide, covering single-phase and three-phase UPS systems, replacement batteries, battery packs, management cards and installation accessories.

An APC Replacement Battery Cartridge (RBC) is a pre-assembled set of sealed valve-regulated lead-acid (VRLA) blocks, wired, terminated and packed so that the battery of a UPS can be changed as one unit. Each cartridge number is listed for specific UPS models, and the cartridge arrives ready to fit with the required connectors. Valve-regulated lead-acid batteries typically need replacement every three to five years, or earlier when the UPS self-test reports a weak battery. On UPS models that support hot-swap, the cartridge can be changed with the load still running; otherwise plan a short shutdown.

In the product data for the APC APCRBC123, its battery technology is listed as lead-acid battery; the battery voltage is 24 V. These values are the starting point for matching it to the rest of the installation.

Using the APCRBC123 in Gulf climate and grid conditions

Summer shade temperatures in Muscat, Sohar and the interior regularly pass 45 °C, so electronic and battery equipment belongs in an air-conditioned room or cabinet rather than an open plant area. Battery temperature has the biggest effect on service life: as a rule of thumb, the life of a valve-regulated lead-acid battery roughly halves for every 10 °C above 25 °C, so a room held at 20 to 25 °C pays back in fewer battery replacements. Fine dust inland and humid, salty air on the coast are hard on electronics, so a sealed room, clean filters and periodic inspection of fans and terminals are part of a reliable installation.

Service life and maintenance of the APC APCRBC123

Plan inspections at least once a year: check that the equipment is clean, that fans and filters are free of dust, that cable terminations are tight and that no alarms are stored in the event log. Where a UPS is involved, run a self-test and a short battery test under real load, and record the results so that a gradual loss of runtime is noticed before it becomes a failure. Replace batteries as a complete set, never by mixing old and new blocks, and keep the replaced items for proper recycling.

Seven Star LLC supplies APC equipment as an independent supplier based in Muscat. Original product documents are provided where available, and the part number APCRBC123 can be quoted together with related batteries, accessories and spares in one enquiry.

Storage, handling and delivery of the APC APCRBC123

Sealed lead-acid batteries lose charge slowly while in storage, faster at high temperature, so batteries and units with internal batteries should be stored cool, dry and upright, and recharged within the interval the manufacturer gives if they are kept for several months before use. Check the packaging and the part number label on arrival, keep the documents supplied with the item, and record the installation date so that future service intervals and warranty questions can be answered quickly. Seven Star LLC arranges delivery to project sites, warehouses and offices across Oman, and shipment to other GCC countries on request.

Information to include when ordering the APCRBC123

The following details help confirm compatibility before a quotation is issued:

• The model and serial number of the UPS the cartridge will be fitted in
• The number of cartridges installed in that UPS
• The date the current battery was installed, if known
• Whether the old battery should be collected for recycling
• The delivery location in Oman (for example Muscat, Sohar, Duqm or Salalah) or elsewhere in the GCC, and the required date

Other APC UPS systems, batteries and accessories and Schneider Electric equipment can be combined in one quotation.

Documents and quotation

The instruction sheet for the APCRBC123 is hosted on this page under Documents so the wiring, installation and operating details can be reviewed before ordering.

The single-unit shipping package is listed as 14.600 cm (height) x 23.400 cm (width) x 27.500 cm (length) with a packed weight of 5.518 kg. Use these values when planning freight, lifting and receiving space.

To order, submit the part number APCRBC123, the quantity and the delivery location. Related items are grouped under UPS and Batteries. Seven Star LLC is an independent supplier based in Muscat and answers with availability and a quotation.