APC SRT2200UXI-LI Smart-UPS On-Line 2200VA Rackmount 2U 230V

What the SRT2200UXI-LI provides

The APC SRT2200UXI-LI gives the protected load a UPS from the Smart-UPS On-Line range sized at 2200 VA (1980 W) with 230 V 1 phase output.

It is fed from 230 V AC 1 phase and supplies 230 V 1 phase as a sine wave. The listed battery type is li-ion (lithium-ion) external sold separately. The recorded mounting mode is rack-mounted with kit.

The APC SRT2200UXI-LI is listed with on-line topology. In an online double-conversion design the load is fed from the inverter at all times, so connected equipment is isolated from mains disturbances and there is no transfer time when the mains supply fails. This approach is commonly chosen for servers, network cores and other sensitive loads.

The output waveform is listed as sine wave. A sine-wave output is the safer choice for equipment with active power factor correction and for sensitive electronics. The listed ratings of 2200 VA and 1980 W correspond to a power factor of 0.9. Size the load against the watt rating as well as the VA rating, and keep margin for future equipment.

Technical specifications

Output, input and battery information

Output connections: 6 IEC 60320 / 2 IEC 60320. Input connection: BS 1363 British / IEC 60320 C20 / CEE 7/7. Input frequency: 40…70 Hz auto-sensing. Communication and expansion: Serial port / USB port.

Extendable runtime is listed as 1.

Load sizing should be checked against both the VA and the watt rating, and runtime depends on the connected load, battery condition and ambient temperature. Confirm these points against the product documents before ordering.

Installation space and operating limits

Dimensions are 432 mm x 85 mm x 508 mm (H x W x D), and the unit weighs 22 kg. Colour: black.

Listed operating limits: operating temperature 0…40 °C; relative humidity 0…95 % non-condensing; operating altitude 0…10000 ft; protection IP20; acoustic level 50 dBA.

Certifications: CE / EAC / UK PSTI. Standards: EN/IEC 62040-1:2019/A11:2021 / EN/IEC 62040-2:2006/AC:2006 / EN/IEC 62040-2:2018. Warranty recorded by APC (months): 60.

Battery data listed for this model: type li-ion (lithium-ion) external sold separately. Lithium-ion batteries are generally lighter and longer-lived than sealed lead-acid blocks, and the battery state can be monitored through the UPS management interface. Used batteries must be recycled according to local regulations. Extendable runtime is listed as 1. Actual runtime always depends on the connected load, battery age and ambient temperature.

Further electrical values recorded for the APC SRT2200UXI-LI include: efficiency at full load: 50…150 V 40% load / 80…150 V; bypass type: Built-in bypass; crest factor: 3 : 1; surge energy rating: 432 J. Use these figures when sizing upstream protection and cabling, and confirm them against the installation documents for the exact variant.

Communication and management details listed: UPS connectivity: Serial port / USB port. Network cards, software and monitoring options should be matched to the facility monitoring system before ordering.

The mounting mode is listed as rack-mounted with kit. The unit measures 432 mm x 85 mm x 508 mm (H x W x D) and weighs 22 kg, so check the available space and the floor or rack loading before delivery. It occupies 2U of rack space. Rack installation should be checked against the rack depth, rail kit and the clearance needed behind the unit for cables and airflow. Listed environmental limits: operating temperature 0…40 °C; relative humidity 0…95 % non-condensing; altitude 0…10000 ft. Equipment rooms in the Gulf region often run warm, so leave ventilation clearance and keep the unit away from direct heat sources.

Certifications listed: CE / EAC / UK PSTI. The warranty period recorded in the product data is 60 months. If a project requires certificates or test reports, include that request with the quotation request.

How the SRT2200UXI-LI is used in APC Smart-UPS On-Line systems

Smart-UPS On-Line (SRT) models use double-conversion on-line topology: the load is fed continuously from the inverter, so there is no transfer time and the output stays isolated from sags, spikes and frequency drift on the incoming supply. The range supports external battery packs for longer runtime and network management cards for remote monitoring, which makes it a standard choice for critical servers, medical and laboratory equipment and industrial control.

The APC SRT2200UXI-LI is a complete UPS rather than a spare part, so the selection starts from the load. Add up the real power of the connected equipment in watts, compare it with the watt rating of the UPS as well as the VA rating, and keep about 20 to 25 percent margin for growth and for inrush current when equipment restarts. Then define the runtime the site needs: a few minutes is enough to ride through short interruptions or to let a standby generator start and stabilise, while longer outages call for external battery capacity where the model supports it.

In the product data for the APC SRT2200UXI-LI, it is rated 2200 VA and 1980 W; it uses on-line topology; its battery technology is listed as li-ion (lithium-ion) external sold separately; it occupies 2U rack unit(s). These values are the starting point for matching it to the rest of the installation.

Using the SRT2200UXI-LI in Gulf climate and grid conditions

The output can be set to 240 V, which matches the nominal 240 V single-phase supply in Oman. The listed operating temperature tops out at 40 °C. Summer shade temperatures in Muscat, Sohar and the interior regularly pass 45 °C, so the equipment belongs in an air-conditioned room or cabinet rather than an open plant area. Battery temperature has the biggest effect on service life: as a rule of thumb, the life of a valve-regulated lead-acid battery roughly halves for every 10 °C above 25 °C, so a room held at 20 to 25 °C pays back in fewer battery replacements. The heat dissipation of 317 Btu/h has to be included in the cooling budget of the room.

Dust and humidity are the other two regional factors: fine dust blocks fans and filters, and coastal humidity and salt attack contacts, so a clean, sealed room and regular inspection protect the investment. Many sites in the region run the UPS downstream of a standby diesel generator. The UPS carries the load during the start-up of the generator and smooths its voltage and frequency, so the generator should be sized with margin for the UPS input and battery charging current.

Information to include when ordering the SRT2200UXI-LI

The following details help confirm compatibility before a quotation is issued:

• The load to be protected in watts and VA, with the share of critical equipment
• The runtime needed on battery, and whether a standby generator is installed
• Input and output connection types required on site (BS 1363 British / IEC 60320 C20 / CEE 7/7 / 6 IEC 60320 / 2 IEC 60320)
• Rack or tower installation, and rack depth if rack-mounted
• Whether a network management card or monitoring is required
• The delivery location in Oman (for example Muscat, Sohar, Duqm or Salalah) or elsewhere in the GCC, and the required date

Browse the full APC catalogue or other Schneider Electric products supplied by Seven Star LLC.

Documents and quotation

The user guide for the SRT2200UXI-LI is hosted on this page under Documents so the wiring, installation and operating details can be reviewed before ordering.

The single-unit shipping package is listed as 24.6 cm (height) x 74.9 cm (width) x 59.4 cm (length) with a packed weight of 29.6 kg. Use these values when planning freight, lifting and receiving space.

To order, submit the part number SRT2200UXI-LI, the quantity and the delivery location. Related items are grouped under UPS and Batteries. Seven Star LLC is an independent supplier based in Muscat and answers with availability and a quotation.