AMETEK 7000-330-SE LCD Host Interface PCB Assembly
Overview
The AMETEK 7000-330-SE is the LCD Host Interface PCB and guard assembly used across the AMETEK Process Instruments AMEVision board set, the operator display and control platform that AMETEK supplies alongside its Thermox combustion analyzers, principally the WDG-V analyzer family. This assembly carries the local operator interface logic that drives the analyzer’s LCD display, accepts keypad input, and communicates measurement, alarm and diagnostic data between the connected analyzers and the operator standing at the AMEVision unit. It is a genuine AMETEK OEM spare, sold as a direct fit replacement for AMEVision-equipped combustion analyzers already in service.
Seven Star LLC supplies the AMETEK 7000-330-SE as an authorized-partner spare part to refineries, gas processing plants, power stations and cement plants across Oman and the wider GCC that run AMETEK combustion analyzers on their boilers, fired heaters and furnaces. Because the board is model-specific to the AMEVision architecture, it is best ordered against the exact analyzer serial or the previously fitted board’s part number so the correct firmware revision and connector layout is confirmed before dispatch.
Measurement and Operating Principle
The 7000-330-SE itself does not perform gas measurement – that task belongs to the analyzer’s zirconium oxide oxygen cell and catalytic combustibles detector. Instead, the LCD host interface board is the presentation and control layer of the AMEVision system. It receives digitized process values (O₂ percentage, combustibles, temperature, calibration status) from the connected analyzers over the AMEVision unit’s MODBUS RTU link and renders them on the unit’s 4.2-inch VGA colour display in real time, refreshing continuously so operators can read stack oxygen or combustibles trends without opening a laptop or handheld configurator.
The board also underpins the AMEVision keypad interface, through which operators run site calibration, adjust setpoints and navigate diagnostic menus without a laptop or handheld configurator. AMETEK documents the AMEVision unit as supporting configuration, calibration and monitoring of up to four WDG-V analyzers over a two-wire MODBUS RTU connection, with up to eight sensors configurable to a single unit, so one display can serve several fired heaters or boiler trains from one accessible location. A guard plate is supplied as part of this assembly to protect the interface electronics during handling and installation.
Engineering Design
As part of the AMEVision board set, the 7000-330-SE is engineered to the same industrial reliability standard as the rest of the AMETEK combustion analyzer platform, and is intended for continuous service in analyzer houses and control rooms serving boilers, fired heaters and furnaces. AMETEK specifies the AMEVision unit itself for a −20 to +55 °C ambient range and for Class I Division 2 Groups A–D and Class I Zone 2 Group IIC, T4 hazardous locations, which sets the environmental envelope this assembly is expected to work within. The guard plate is supplied with the board so the assembly can be handled, shipped and fitted without the exposed interface electronics being damaged in the process.
Because AMEVision is a modular board set, AMETEK maintains strict part-number traceability between board revisions and analyzer firmware; the 7000-330-SE is stocked and supplied as the specific host interface revision for AMEVision-based combustion analyzers, so that a replacement board is ordered against a confirmed revision rather than a generic description. Seven Star LLC recommends quoting the AMEVision unit serial number and firmware revision with any enquiry for the AMETEK 7000-330-SE so the supplied assembly matches the installed board set exactly.
AMETEK 7000-330-SE Key Features
- AMETEK 7000-330-SE is a genuine AMETEK OEM board – direct fit replacement for the AMEVision LCD host interface assembly
- Drives the AMEVision 4.2-inch VGA colour display for real-time O₂ and combustibles readout
- Manages AMEVision keypad input for on-site calibration and alarm setpoint configuration
- Integrated guard plate protects the PCB assembly during handling, shipment and installation
- Fits the AMEVision unit, which AMETEK rates for −20 to +55 °C ambient and Class I Div 2 Groups A–D / Class I Zone 2 Group IIC, T4 hazardous areas
- Supports the AMEVision communication set: MODBUS RTU, TCP/IP Fast Ethernet, RS-485 and USB
- Part of the AMEVision board set used in the AMEVision display and user interface for Thermox WDG-V series analyzers
- Restores access to AMEVision functions including trend data logging, calibration stability indication and cell end-of-life prediction
Industrial Applications for the AMETEK 7000-330-SE
The AMETEK 7000-330-SE is used wherever an AMEVision display unit is installed alongside AMETEK Thermox combustion analyzers – refinery fired heaters, power plant boilers, cement kiln preheaters and industrial furnaces where continuous stack O₂ and combustibles monitoring supports combustion efficiency and emissions compliance. When the original host interface board fails or the LCD display becomes unreliable, this assembly restores full local operator access to the analyzer without needing to replace the entire unit.
Seven Star LLC, as an authorized AMETEK partner in Oman, keeps a channel open to this and related AMEVision spares for operators in Sohar, Muscat, Duqm and Salalah who need fast turnaround on combustion analyzer maintenance. Our engineering team can help confirm the correct board revision against your existing analyzer’s serial number and firmware before shipment, minimizing downtime during a plant turnaround or shutdown.
The AMEVision Display and What This Board Restores
Understanding what the AMEVision unit does explains why the AMETEK 7000-330-SE matters to a combustion team. The AMEVision is a host display and user interface that talks to the analyzers over MODBUS RTU and, through that link, allows site calibration, monitoring and configuration to be carried out from one point rather than at each analyzer in turn. AMETEK documents the unit as supporting up to four WDG-V analyzers, with as many as eight sensors configurable to a single AMEVision, and as offering MODBUS RTU, TCP/IP Fast Ethernet, RS-485 and USB connectivity for host system integration, firmware updates and data transfer.
Beyond simple readout, the AMEVision provides functions that a plant relies on for planning rather than firefighting: end-of-life prediction for zirconium oxide cells and combustible detectors, a stability indicator that tells the technician when a calibration has actually settled, analog output verification with individual controls for diagnostic work, trend data logging, and temperature monitoring of both the cell enclosure and the electronics. When the LCD host interface assembly fails, every one of those functions becomes inaccessible even though the analyzers themselves may still be measuring correctly – which is precisely why the 7000-330-SE is a board worth holding as a critical spare rather than sourcing reactively.
Specifying and Ordering the AMETEK 7000-330-SE in Oman
AMETEK lists the 7000-330-SE under the Combustion > AMEVision product hierarchy as an item in the AMEVision Board Set, alongside related assemblies such as 7000-719-SE, 7000-871-SE, 7000-692-SE, 7000-872-SE and 7000-843-SE. Where a fault has been traced to the display or keypad path, it is worth confirming with the site technician whether the failure sits with this host interface assembly or with one of those adjacent boards before an order is placed, because the symptoms – a blank or unreadable display, unresponsive keys, or loss of communication indication – can present similarly across the set.
For refineries, gas plants, power stations and cement works across the Sultanate of Oman, the practical consideration is lead time against turnaround planning. Boiler and fired-heater outages in Sohar, Duqm, Muscat and Salalah are scheduled months in advance, and a combustion analyzer whose operator interface is dead is usually tolerated until that window arrives. Ordering the genuine AMETEK 7000-330-SE ahead of the shutdown, rather than after it, is what converts a known defect into a planned twenty-minute board swap. Seven Star LLC supports that planning with quotation, lead-time confirmation and revision checking against the installed AMEVision unit.
AMETEK 7000-330-SE Technical Specifications
| Model | AMETEK 7000-330-SE |
|---|---|
| Description | AMETEK 7000-330-SE – Assembly, LCD Host Interface PCB and Guard |
| Board Set | AMEVision Board Set |
| Host Unit | AMEVision display and user interface (AMETEK Thermox) |
| Analyzers Supported by Host | Up to four WDG-V series analyzers; up to eight sensors per unit |
| Host Display | 4.2-inch VGA colour display with keypad |
| Host Communications | MODBUS RTU, TCP/IP Fast Ethernet, RS-485, USB |
| Host Hazardous Area Rating | Class I Div 2 Groups A–D; Class I Zone 2 Group IIC, T4 |
| Host Ambient Temperature | −20 to +55 °C |
| Function | Local LCD display drive and keypad interface |
| Construction | PCB assembly with integrated guard plate |
| Manufacturer | AMETEK Process Instruments |
| Supply | Genuine OEM spare part, quote on request |
Request a Quote
Contact Seven Star LLC for pricing, lead time and stock availability on the genuine AMETEK 7000-330-SE LCD host interface board for your combustion analyzer maintenance program in Oman and the GCC.
Related Products
- Siemens Maxum II FID 302A Detector Assembly 2021651-002
- Siemens Maxum II Filament Detector 2-Cell Assembly 2021335-001
- Siemens Maxum II Solid State Relay Kit 2020152-001
- Systech EC91 Main Amplifier PCB – Part No. 091-024 (Oxygen Transmitter)
- Simtronics GD10-P00-17DG-0XH-00 Infrared Gas Detector (GD10P Series)
- Siemens Maxum II 2-Cell Filament Detector Repair Kit 2020379-701
electromechanical devices, trusted for its precision engineering and long-term reliability. With decades of innovation, the company serves a wide range of industries, including aerospace, power generation, manufacturing, and process control.
Its diverse product portfolio includes sensors, analyzers, motors, and monitoring systems designed to meet demanding industrial standards. AMETEK’s technologies play a vital role in improving accuracy, efficiency, and safety across critical applications worldwide.
Seven Star LLC proudly supplies genuine AMETEK instruments and components, offering industrial clients access to reliable solutions backed by global expertise and technical support.
Reviews
There are no reviews yet.