Servomex SERVOTOUGH Laser 3 Plus Combustion TDL Gas Analyzer

Overview

The Servomex SERVOTOUGH Laser 3 Plus Combustion is a cross-stack tunable diode laser (TDL) gas analyzer purpose-built for continuous, in-situ measurement of oxygen, carbon monoxide, and methane in demanding combustion and process environments. Using wavelength modulation spectroscopy (WMS), the analyzer measures gas concentration directly within the process stream at temperatures up to 1300°C, eliminating the sample extraction lag, filter fouling, and maintenance burden associated with traditional extractive analyzers. For refineries, power plants, cement kilns, and process furnaces across the region, this translates into faster combustion trim response, tighter fuel-to-air control, and measurable efficiency gains.

As the official authorized partner and exclusive regional representative for Servomex, Seven Star LLC proudly supplies the SERVOTOUGH Laser 3 Plus Combustion analyzer to industrial operators throughout the Sultanate of Oman and the wider GCC. Facilities in Muscat, Sohar, and Salalah rely on Seven Star LLC for genuine Servomex hardware, certified commissioning support, and readily available spares — ensuring combustion optimization projects in Oman’s refining, power generation, and heavy industry sectors are backed by full manufacturer warranty and local technical expertise.

Measurement Principle of the Servomex Laser 3 Plus Combustion

The analyzer operates on tunable diode laser absorption spectroscopy (TDLAS) combined with wavelength modulation spectroscopy. A near-infrared laser diode is tuned rapidly across a narrow absorption line unique to the target gas species — oxygen, carbon monoxide, or methane — and the light is transmitted directly across the process duct or stack from a transmitter unit to a receiver unit mounted on the opposite side. As the beam passes through the hot, particulate-laden gas, the target molecules absorb light at their characteristic wavelength, and the degree of absorption is directly proportional to gas concentration, independent of most background interferents.

Because the measurement happens in-situ, across the full path length of the stack or duct (selectable from 0.5 to 25 meters), the Laser 3 Plus Combustion delivers a genuinely representative average reading rather than a single-point extractive sample. This cross-stack approach means no moving parts within the gas path, no sample conditioning system, no pressure drop, and no risk of clogging from ash, dust, or condensables — a decisive advantage in combustion applications where extractive analyzers routinely fail from probe fouling and line blockage.

Engineering Design of the Servomex Laser 3 Plus Combustion

The Servomex Laser 3 Plus Combustion system consists of a compact transmitter (131 x 164 x 302.4mm, under 3kg) and receiver (110 x 146 x 247.6mm, under 2kg) mounted on flanges directly across the stack or duct, aligned via an integrated sighting scope for straightforward field commissioning. Both units carry an IP66 ingress rating for outdoor and harsh-environment installation, and the design is certified ATEX Category 3/21 and IECEx Zone 2/21, with SIL2 capability for safety-related combustion trim and burner management applications.

Communication is handled over Modbus via Ethernet, allowing straightforward integration with distributed control systems, combustion management systems, and plant historians without dedicated fieldbus hardware. The rugged transmitter and receiver housings are engineered for long-term unattended operation in refinery furnaces, boiler stacks, and kiln exhausts, with minimal calibration drift and no consumable sample lines to replace, substantially lowering total cost of ownership compared with extractive O2/CO analyzers.

Key Features

The Servomex Laser 3 Plus Combustion analyzer, a core product in the Servomex Laser 3 Plus range, is engineered around reliability, speed, and low maintenance for continuous combustion monitoring:

• Cross-stack tunable diode laser (TDL) measurement of O2, CO, and CH4 with no sample extraction required.
• Wavelength modulation spectroscopy (WMS) technique delivers high selectivity and immunity to background gas interference.
• In-situ process temperature capability up to 1300°C, suited to furnace, kiln, and boiler stack conditions.
• Selectable path lengths from 0.5 to 25 meters to match duct or stack geometry.
• ATEX Category 3/21 and IECEx Zone 2/21 certification for hazardous area installation.
• SIL2 capability supports safety instrumented combustion control loops.
• IP66-rated transmitter and receiver enclosures for outdoor, high-dust environments.
• Modbus over Ethernet communication for direct DCS and combustion management system integration.

Industrial Applications

The Servomex Laser 3 Plus Combustion analyzer is widely deployed in refinery process heaters, power plant boilers, cement kiln exhausts, and industrial furnaces where fast, representative O2 and CO readings drive combustion trim optimization and fuel savings. Its cross-stack, in-situ design makes it especially suited to high-dust, high-temperature exhaust streams where extractive analyzers struggle with probe fouling, making it a preferred solution for operators seeking to reduce excess air, cut fuel consumption, and lower NOx and CO emissions in compliance with regional environmental regulations.

As the officially authorized partner for Servomex, Seven Star LLC distributes and supports the Laser 3 Plus Combustion analyzer across Oman’s refining and power generation sector, including facilities in the Sohar and Salalah economic zones and industrial clusters throughout Muscat. Combustion engineers and process control teams across the GCC turn to Seven Star LLC for genuine Servomex analyzers, factory-trained commissioning assistance, and a regionally stocked spares inventory that minimizes downtime on critical combustion monitoring loops.

Technical Specifications

The table below summarizes the key specifications of the Servomex Laser 3 Plus Combustion analyzer, confirming why the Servomex Laser 3 Plus is specified for demanding combustion duty:

Request a Quote for Servomex SERVOTOUGH Laser 3 Plus Combustion TDL Gas Analyzer

Facilities across Oman and the GCC seeking a Servomex Laser 3 Plus solution to optimize combustion efficiency and reduce emissions can request a formal RFQ for the Servomex Laser 3 Plus Combustion analyzer directly from Seven Star LLC. As the authorized partner for Servomex in Oman and the GCC, Seven Star LLC maintains regional warehouse stock, provides full technical datasheets on request, and connects customers with the instrumentation division for application engineering, commissioning support, and long-term service agreements.

Related Products

• METPOINT DPM SD23 with BDL compact 4031322
• Southland Sensing OMD-625 Oxygen Analyzer
• Applied Analytics OMA-300 Multi-Stream Process Analyzer
• ProTech™ 1000 Z2 Tape-Based H2S / Total Sulfur Analyzer
• Applied Analytics OMA-300-InGaAs Process Analyzer
• AMETEK Western Research 900 Air Demand Analyzer – Sulfur Recovery