Ethernet-Controller EC86A For IDS 850

Name: FEP EC86A Ethernet Controller IDS 850 | Seven Star LLC
Brand: IDS GmbH

Description

Overview

The FEP EC86A is a network controller module used within IDS 850 telecontrol systems, providing the connection between the system and communication networks over Ethernet (LAN) and serial interfaces (WAN). It enables the IDS 850 substation or remote terminal unit to exchange data with control centres and other systems.

The EC86A supports 10/100 Mbit/s Ethernet via a front-side RJ45 socket or a front-side fibre optic connector (LWL-100FX), with Category 5 shielded cable for copper connections. This flexibility allows the controller to be matched to the existing network infrastructure of the installation.

Engineering & Design

In addition to the service interface, the front panel provides three further serial interfaces: one permanently connected as V.28 via RJ45 socket, and two more via 15-pin Sub-D connectors. The 15-pin interfaces support V.28, X.21, G.703 (2048 kbit/s), ISDN, and other protocols using appropriate plug-in modules.

A third synchronous interface can be implemented with an additional adapter card (KP2A1), allowing one EC86A node to serve three long-distance lines. LEDs on the front display the status of the card and the individual processes, and eight configurable LEDs can be assigned via software for application-specific indication.

Key Features

Ethernet (LAN) and serial (WAN) connectivity for IDS 850
10/100 Mbit/s Ethernet via RJ45 or LWL-100FX fibre
Three serial interfaces (V.28 RJ45 + two 15-pin Sub-D)
V.28, X.21, G.703 (2048 kbit/s) and ISDN protocol support
Optional KP2A1 adapter for a third synchronous interface
Status LEDs plus eight software-configurable LEDs
Front-side connectors for easy access

Applications

Substation telecontrol and RTU communication
IDS 850 connection to control centres
SCADA and telemetry networks
Energy and utility automation
Long-distance line communication

Specifications

Specification	Value
Manufacturer	FEP (IDS 850 system)
Model	EC86A
Type	Network controller
Ethernet	10/100 Mbit/s, RJ45 or LWL-100FX fibre
Serial Interfaces	3 (V.28 RJ45, 2x 15-pin Sub-D)
Protocols	V.28, X.21, G.703, ISDN
Optional Adapter	KP2A1 for third synchronous interface
Indication	Status LEDs + 8 configurable LEDs
System	IDS 850 telecontrol

For substation engineers extending IDS 850 networks, the FEP EC86A Ethernet controller is the standard interface module, and Seven Star LLC supplies the FEP EC86A Ethernet controller with verified specifications for your telecontrol project.

Why Seven Star LLC

Seven Star LLC supplies the FEP EC86A Ethernet controller for IDS 850 systems across the Gulf, with verified specifications and technical support for substation and telecontrol projects. Our team assists with interface configuration and network planning.

We support energy and utility customers with reliable B2B supply of telecontrol spares and modules throughout the GCC.

Integration & Reliability

The EC86A is designed for continuous operation in substation and RTU environments, where communication availability is critical to network operation. The front-side connectors and LED status indication allow quick checks during commissioning and maintenance, and the modular plug-in interface cards cover the common serial standards used in telecontrol practice.

Because the controller supports both copper and fibre Ethernet, it can be matched to the physical infrastructure of the site, and the optional KP2A1 adapter extends the capability to three long-distance lines when the network topology requires it.

Documentation & Supply

Seven Star LLC provides the FEP EC86A with technical documentation and interface planning support, helping engineers configure the controller for their IDS 850 application.

We maintain a practical spares programme for IDS 850 communication modules, supporting utilities and industrial customers across the Gulf.

Network planning for substation telecontrol should include the physical media and protocol options of the communication controllers, and the EC86A’s combination of copper and fibre Ethernet with serial interfaces covers the range needed for both new and legacy installations.

The status LEDs reduce troubleshooting time by showing the state of the card and each process at a glance, and the software-configurable LEDs can be assigned to application events that matter to the operator.

Substation engineers planning IDS 850 upgrades should specify the FEP EC86A Ethernet controller as the standard interface module, and Seven Star LLC supplies the FEP EC86A Ethernet controller with full documentation for your network project.

Spare module planning for telecontrol networks should include the communication controller, and the EC86A Ethernet controller is the designated spare for IDS 850 racks.

The FEP EC86A Ethernet controller is the module specified for new IDS 850 communication projects, and the FEP EC86A Ethernet controller documentation is supplied with every unit.

Request a Quote for Ethernet-Controller EC86A For IDS 850

For the FEP EC86A Ethernet controller, EC86A network controller or any related control and instrumentation requirement, contact the Seven Star LLC team. Submit a formal inquiry through our RFQ page with your module, I/O and system configuration, and our specialists will respond with a detailed commercial proposal and the official FEP documentation.

Related Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Ethernet-Controller EC86A For IDS 850”

About brand

IDS GmbH, headquartered in Germany, specialises in automation system modules, communication processors, interface cards and control hardware for industrial applications including power utilities, networks and process control. Their product lines such as CC88A, EC86A, RC8DA are used in IDS 850 systems for data acquisition, signal interface and substation automation. Seven Star LLC supplies genuine IDS GmbH modules for industrial automation projects across Oman and the Middle East.