APC AP9641 Network Management Card 3
Overview
The APC AP9641 is a Network Management Card 3 (NMC3) with environmental monitoring, engineered to give facility and IT teams secure, remote visibility and control over compatible APC UPS systems directly over the network. Installed into a supported UPS, the card transforms a standalone battery backup into a fully networked, remotely manageable power asset, supporting scheduled shutdowns, event logging, and proactive alerting from anywhere on the network.
As the official authorized partner and exclusive regional representative for APC in the Sultanate of Oman, Seven Star LLC proudly supplies the APC AP9641 with full manufacturer traceability, firmware support, and warranty documentation. Data centers, control rooms, and critical infrastructure facilities across Muscat, Sohar, and Salalah rely on Seven Star LLC to source genuine APC network management hardware, avoiding the compatibility and security risks associated with unauthorized or counterfeit accessory cards.
Operating Principle
The APC AP9641 operates as an embedded network interface that continuously polls the host UPS for status, load, battery, and event data, then exposes that information through a secure web interface, command-line interface, and SNMP for integration with building management and data center infrastructure management platforms. A high-speed processor and Gigabit Ethernet connection allow the card to support multiple concurrent user sessions without degrading response time, even during high-traffic monitoring periods.
Because the card communicates over HTTPS, SSH, and secure SNMP rather than legacy unencrypted protocols, it closes a common security gap in older UPS monitoring deployments while still providing the granular event logging needed to reconstruct the timing and sequence of an incident after the fact. The practical consequence for facility managers is a UPS fleet that can be monitored, configured, and gracefully shut down remotely without exposing the power infrastructure to unnecessary network risk.
Engineering Design of the APC AP9641
The APC AP9641 installs into the accessory slot of compatible APC Smart-UPS and Symmetra systems, drawing power directly from the host unit and requiring no separate power supply. The card ships with a temperature sensor and USB cable, and when paired with compatible AP9335T-family sensors, it extends monitoring to ambient temperature and humidity around the UPS installation, giving facility teams early warning of cooling failures before they threaten connected IT or process control loads.
Configuration and firmware updates are managed through the card’s own secure web interface, and its integration with EcoStruxure IT and StruxureWare platforms allows a single pane-of-glass view across a multi-site UPS fleet. This architecture makes the AP9641 straightforward to deploy at scale across distributed facilities, since each card is independently addressable while still reporting into a centralized management platform.
Key Features
The APC AP9641 combines secure remote access with environmental awareness, and the following features summarize why data center and facility teams standardize on this network management card:
- Secure remote monitoring and management over HTTPS, SSH, and encrypted SNMP protects UPS infrastructure from network-based threats.
- Gigabit Ethernet connectivity with a high-speed processor supports multiple concurrent user sessions without lag.
- Included temperature sensor and support for AP9335T-family accessories extends monitoring to ambient environmental conditions.
- Detailed event and trend logging allows facility teams to reconstruct the sequence of events leading to an incident.
- Scheduled shutdown and reboot capability protects connected IT and process equipment during extended outages.
- Integration with EcoStruxure IT and StruxureWare supports centralized, multi-site UPS fleet management.
- Direct power draw from the host UPS eliminates the need for a separate power supply or cabling.
- Included 1-year Secure NMC System subscription keeps the card current with the latest firmware and security updates.
Industrial Applications
The APC AP9641 is deployed in data centers, control rooms, telecom shelters, and industrial process control power infrastructure where remote UPS visibility and secure network management are essential to uptime. In Oman, this card is commonly specified for hospital complex critical power systems, district cooling plant control room UPS fleets, and refinery and petrochemical facility control system power backup, where an unplanned UPS event can have significant operational consequences.
As the officially authorized partner for APC, Seven Star LLC distributes the AP9641 to systems integrators and facility management teams throughout the Sohar and Salalah economic zones, as well as to hospitality chains and commercial data centers across Muscat that require centralized, secure oversight of distributed UPS assets. The card’s environmental monitoring capability makes it a preferred choice for remote or unmanned equipment rooms across the GCC.
Technical Specifications
The table below summarizes the key operating parameters of the APC AP9641 Network Management Card 3.
| Parameter | Specification |
|---|---|
| Model | APC AP9641 |
| Product Type | Network Management Card 3 (NMC3) |
| Connectivity | Gigabit Ethernet |
| Management Protocols | HTTPS, SSH, SNMP |
| Environmental Monitoring | Included temperature sensor; humidity via AP9335T family |
| Integration | EcoStruxure IT, StruxureWare |
| Included Accessories | Temperature sensor, USB cable, user manual |
| Power Source | Host UPS accessory slot |
| Application | Remote UPS monitoring and management |
Request a Quote for APC AP9641 Network Management Card 3
As the authorized partner for APC in Oman and the GCC, Seven Star LLC supports formal RFQ submissions, holds regional warehouse stock for rapid dispatch, and can provide the full technical datasheet for the APC AP9641 network management card on request. Contact the Seven Star LLC instrumentation division for genuine APC power management hardware and application support across Muscat, Sohar, and Salalah.
Additional Notes on the APC AP9641
Facility teams selecting the APC AP9641 Network Management Card 3 benefit from its plug-and-play compatibility with the broader APC UPS portfolio already deployed across Oman data centers and industrial control rooms. Seven Star LLC recommends the APC AP9641 as the standard remote-monitoring accessory for any new Smart-UPS or Symmetra installation, since retrofitting network management after commissioning is more disruptive than specifying it up front. The card’s secure protocol stack also satisfies IT security review requirements common in banking, healthcare, and government facilities across the GCC.
Related Products
- Yuasa NP12-12 12V 12Ah Sealed Lead Acid Battery
- APC SMC1000IC uninterruptible power supply (UPS) Line-Interactive 1000 VA 600 W 8 AC outlet(s)
- APC SMX3000HV Smart-UPS X 3000VA Rack/Tower LCD UPS
- APC SRT2200XLI Smart-UPS SRT 2200VA Online UPS
- APC SURT8000XLI Smart-UPS RT 8000VA Online UPS
- ABB 3BDM000199R1 SB808F RAM Buffering Battery Module
- APC BX1600MI-MS Back-UPS 1600VA Tower UPS
APC, a brand of Schneider Electric, is a global leader in power protection and energy management solutions. The company designs and manufactures advanced uninterruptible power supplies (UPS), surge protectors, and power distribution systems that ensure continuous and reliable operation for critical equipment.
Trusted by businesses and industries worldwide, APC products are known for their durability, intelligent design, and energy efficiency. From small offices to large data centers, APC delivers scalable solutions that safeguard electrical systems from power interruptions and fluctuations.
Seven Star LLC supplies authentic APC UPS systems and accessories to clients across the Middle East, providing dependable backup power and technical reliability supported by Schneider Electric’s global expertise.
Reviews
There are no reviews yet.