Bently Nevada 9200-09-01-01-00 Velomitor® Velocity Transducer

Overview

The Bently Nevada 9200-09-01-01-00 Velomitor® is part of the proven 9200 Series piezo-velocity sensors used worldwide for casing vibration measurements on pumps, fans, compressors, motors and gearboxes. Unlike raw accelerometers, the Velomitor integrates and conditions the signal inside the sensor, providing a scaled velocity output that connects directly to Bently Nevada 3500/1900 monitors, PLC/DCS analog inputs, and portable analyzers. The 9200’s hermetically sealed stainless-steel construction, industrial temperature rating, and shock/vibration survivability make it a dependable choice for harsh process environments.

Variant code 09-01-01-00 defines mechanical/electrical options (mounting, connector, approvals, temperature range). If you need help decoding options or cross-replacing legacy probes, our technical team will map this code to your site standard and confirm compatibility.

Why choose the 9200 Series Velomitor®?

• Direct velocity output (no external integrator) simplifies wiring and reduces noise.

• Stable, repeatable sensitivity for API-610 / ISO vibration alarm practices.

• Rugged, field-proven design used across O&G, power, mining, water & wastewater.

• Seamless integration with Bently Nevada monitoring (3500/3300/1900) and third-party systems.

• Multiple option codes for mounting studs/bases, connectors, and approvals.

Typical Specifications

• Transducer type: piezoelectric velocity (Velomitor®)

• Sensitivity: typically 100 mV/in/s (≈ 3.94 mV/mm/s), ±10%

• Measurement range: up to ~50 mm/s RMS (or per variant)

• Frequency response (±3 dB): approx. 10–1,000 Hz (typical Velomitor band)

• Temperature range: around −54 to +121 °C (industrial grade)

• Case material: stainless steel, hermetically sealed

• Connector: per option code (e.g., 2-pin MIL / integral cable)

• Mounting: threaded stud or base-isolated pad (per option code)

• Approvals: CE; ATEX/CSA/IECEx variants available (check option)

• Output: voltage proportional to velocity; constant-current powered

Applications

• Pump/motor casing vibration (overall RMS, trending, protection)

• Fans & blowers, cooling towers, conveyors, gearboxes

• Compressors & turbines auxiliary systems

• Balance, misalignment, looseness & bearing health indicators

Compatibility & Integration

• Bently Nevada: 3500/3300/1900 monitors, System 1, portable analyzers

• DCS/PLC: direct analog input (with appropriate power/signal conditioning)

• Works with standard industrial cabling and junction boxes; option codes allow connectorized or integral-cable builds.

What you get from Seven Star LLC

• Genuine Bently Nevada 9200-09-01-01-00 with traceable origin

• Option-code verification against your P&ID/spec sheet

• Cable/connector & mounting hardware selection

• Commissioning notes, wiring & polarity guidance

• Best regional pricing and fast lead-time

Helpful Links

• Datasheet PDF – 9200 Series

Key Specs 

• Piezo-velocity Velomitor® sensor for casing vibration

• Typical 100 mV/in/s sensitivity, 10–1,000 Hz band

• Stainless-steel, hermetic, industrial temperature

• Direct hook-up to Bently 3500/1900 & PLC/DCS

• Variant 9200-09-01-01-00 (mounting/connector per code)

FAQ

What does the Bently Nevada 9200-09-01-01-00 code mean?

It defines mechanical/electrical options (mounting, connector, approvals, temperature). Send us your spec and we’ll decode it and confirm the exact build.

Is the output velocity or acceleration?

Velocity. The Velomitor integrates the acceleration internally to deliver a clean velocity signal.

Can I wire it directly to a PLC/DCS?

Yes—most systems accept the conditioned voltage output. We’ll provide recommended power/signal conditioning and wiring.

Which monitors is it compatible with?

Bently Nevada 3500/3300/1900 series and many third-party analyzers.

Do you offer cables and mounting hardware?

Yes. We supply correct connector/cable assemblies and studs/bases per your option code.

Call to Action

Need help cross-replacing an older probe or matching plant standards? Send your option code and monitor type. We’ll validate compatibility, propose cabling/mounting, and quote best lead time & price.